ETSI TS 125 106-2018 Universal Mobile Telecommunications System (UMTS) UTRA repeater radio transmission and reception (V15 0 0 3GPP TS 25 106 version 15 0 0 Release 15).pdf

1、 ETSI TS 125 106 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); UTRA repeater radio transmission and reception (3GPP TS 25.106 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 106 V15.0.0 (2018-07)13GPP TS 25.106 version 15.0.0 Release 15Reference RTS/TSGR-04

2、25106vf00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document ca

3、n be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of a

4、ny existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may

5、 be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.et

6、si.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified wi

7、thout the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of E

8、TSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 106 V15.0.0 (2018-07)23GPP TS 25.106 version 15.0.0 Release

9、 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314:

10、 “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation

11、, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may in

12、clude trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the pre

13、sent document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications

14、 or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs

15、terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allow

16、ed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 106 V15.0.0 (2018-07)33GPP TS 25.106 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviati

17、ons . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 7g34 General . 7g34.1 Relationship between Minimum Requirements and Test Requirements 7g34.2 Regional requirements 7g35 Frequency bands and channel arrangement 8g35.1 Frequency bands . 8g35.2 TX - RX frequency separation . 9g35.3 Channel

18、 arrangement 10g35.3.1 Channel spacing 10g35.3.2 Channel raster . 10g35.3.3 Channel number 10g36 Output power 11g36.1 Maximum output power . 11g36.1.1 Minimum Requirements . 12g37 Frequency stability . 12g37.1 Minimum requirement 12g38 Out of band gain . 12g38.1 Minimum requirement 12g39 Unwanted em

19、ission 13g39.1 Out of band emission 13g39.1.1 Void 13g39.1.2 Operating band unwanted emissions 13g39.1.3. Protection of the BS receiver in the operating band . 17g39.1.3.1 Minimum Requirement . 17g39.1.4 Co-existence with services in adjacent frequency bands 18g39.1.4.1 Minimum requirement 18g39.2 S

20、purious emissions . 18g39.2.1 General Requirements . 18g39.2.1.1 Minimum Requirement (Category A) . 18g39.2.1.2 Minimum Requirement (Category B) . 19g39.2.2 Void 20g39.2.3 Co-existence with other systems in the same geographical area 20g39.2.3.1 Minimum Requirements 21g39.2.4 Co-existence with co-lo

21、cated and co-sited Base Stations . 24g39.2.4.1 Minimum Requirements 25g39.2.5 Co-existence with PHS . 28g39.2.5.1 Minimum Requirement . 28g39.2.6 Co-existence with UTRA-TDD and/or E-UTRA TDD 29g39.2.6.1 Operation in the same geographic area . 29g39.2.6.1.1 Minimum Requirement . 29g39.2.6.2 Co-locate

22、d Repeaters and UTRA-TDD and/or E-UTRA TDD base stations . 31g39.2.6.2.1 Minimum Requirement . 31g3ETSI ETSI TS 125 106 V15.0.0 (2018-07)43GPP TS 25.106 version 15.0.0 Release 159.2.7 Void 33g39.2.8 Protection of public safety operations . 33g39.2.8.1 Minimum Requirement . 33g310 Modulation accuracy

23、 33g310.1 Error Vector Magnitude . 33g310.1.1 Minimum requirement 34g310.2 Peak code domain error 34g310.2.1 Minimum requirement 34g310.3 Relative Code Domain Error (RCDE) for 64QAM modulation . 34g310.3.1 Minimum requirement 34g311 Input Intermodulation . 34g311.1 General Requirement 34g311.1.1 Min

24、imum requirement 34g311.2 Co-location with BS in other systems 35g311.2.1 Minimum requirements - Co-location with GSM, DCS, PCS, UTRA FDD and/or E-UTRA FDD . 35g311.2.2 Minimum Requirement - Co-location with UTRA-TDD and/or E-UTRA TDD 39g311.3 Co-existence with other systems 40g311.3.1 Minimum requi

25、rements . 40g312 Output intermodulation 44g312.1 Minimum requirement 44g313 Adjacent Channel Rejection Ratio (ACRR) . 45g313.1 Definitions and applicability 45g313.2 Minimum Requirements . 45g3Annex A (informative): Change History 46g3History 49g3ETSI ETSI TS 125 106 V15.0.0 (2018-07)53GPP TS 25.106

26、 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of th

27、e present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document und

28、er change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document ETSI ETSI TS 125 106 V15.0.0 (2018-07)63GPP TS 25.106 version

29、 15.0.0 Release 151 Scope The present document establishes the minimum radio frequency performance of UTRA FDD repeaters. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (id

30、entified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific

31、reference implicitly refers to the latest version of that document in the same Release as the present document. 1 ITU-R Recommendation SM.329: “Unwanted emissions in the spurious domain“. 2 3GPP TS 25.143: “UTRA Repeater Conformance Testing“. 3 3GPP TS 25.113: “Base Station and Repeater Electromagne

32、tic Compatibility“. 4 ETSI ETR 273-1-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment

33、 characteristics; Sub-part 2: Examples and annexes“. 5 3GPP TR 25.942: “RF System Scenarios“. 6 3GPP TS 25.104: “UTRA(BS) FDD; Radio transmission and Reception“. 7 CEPT ECC Decision (13)03, “The harmonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental

34、Downlink (MFCN SDL) “. 8 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Donor coup

35、ling loss: is the coupling loss between the repeater and the donor base station. Down-link: Signal path where base station transmits and mobile receives. Operating band: the frequency range in which UTRA FDD operates, that is defined with a specific set of technical requirements. NOTE 1: The operati

36、ng band(s) for an UTRA Repeater is declared by the manufacturer according to the designations in clause 5.1, Table 5.1. NOTE 2: Unless specified, operating band refers to the uplink operating band and downlink operating band. Pass band: The frequency range in which the repeater operates in with oper

37、ational configuration. This frequency range can correspond to one or several consecutive nominal 5 MHz channels. If they are not consecutive each subset of channels shall be considered as an individual pass band. A repeater can have one or several pass bands. ETSI ETSI TS 125 106 V15.0.0 (2018-07)73

38、GPP TS 25.106 version 15.0.0 Release 15Repeater: A device that receives, amplifies and transmits the radiated or conducted RF carrier both in the down-link direction (from the base station to the mobile area) and in the up-link direction (from the mobile to the base station). In operating bands spec

39、ified with only down-link or up-link, only the up-link or down-link as specified for the operating band is repeated. Up-link: Signal path where mobile transmits and base station receives. 3.2 Symbols (void) 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply

40、: BS Base Transceiver Station DL Down Link (forward link) DTT Digital Terrestrial Television EVM Error Vector Magnitude EIRP Effective Isotropic Radiated Power FDD Frequency Division Duplex FFS For Further Study IMT2000 International Mobile Telecommunication-2000 ITU International Telecommunication

41、Union RCDE Relative Code Domain Error. RF Radio Frequency UARFCN UTRA Absolute Radio Frequency Channel Number UL Up Link (reverse link) UMTS Universal Mobile Telecommunication System UTRA Universal Terrestrial Radio Access WCDMA Wide band Code Division Multiple Access 4 General This specification ap

42、plies only to UTRA-FDD repeaters. Unless otherwise stated, all requirements in this specification apply to both the up-link and down-link directions, where applicable. 4.1 Relationship between Minimum Requirements and Test Requirements The Minimum Requirements given in this specification make no all

43、owance for measurement uncertainty. The repeater test specification 25.143 section 5 2 defines Test Tolerances. These Test Tolerances are individually calculated for each test. The Test Tolerances are used to relax the Minimum Requirements in this specification to create Test Requirements. The measu

44、rement results returned by the Test System are compared - without any modification - against the Test Requirements as defined by the shared risk principle. The Shared Risk principle is defined in ETR 273 Part 1 sub-part 2 section 6.5 4. 4.2 Regional requirements Some requirements in TS 25.106 may on

45、ly apply in certain regions. Table 4.1 lists all requirements that may be applied differently in different regions. ETSI ETSI TS 125 106 V15.0.0 (2018-07)83GPP TS 25.106 version 15.0.0 Release 15Table 4.1: List of regional requirements. Clause number Requirement Comments 5.1 Frequency bands Some ban

46、ds may be applied regionally. 5.2 TX RX frequency separation The requirement is applied according to which frequency bands in Clause 5.1 that are supported by the Repeater. 5.3 Channel arrangement The requirement is applied according to what frequency bands in clause 5.1 that are supported by the Re

47、peater. 6.1 Maximum output power In certain regions, the minimum requirement for normal conditions may apply also for some conditions outside the ranges of conditions defined as normal. 9.1. 2 Operating band unwanted emissions The mask specified may be mandatory in certain regions. In other regions

48、this mask may not be applied. Additional spectrum protection may apply regionally. 9.2.1.1 Spurious emissions (Category A) These requirements shall be met in cases where Category A limits for spurious emissions, as defined in ITU-R Recommendation SM.329 1, are applied. 9.2.1.2 Spurious emissions (Ca

49、tegory B) These requirements shall be met in cases where Category B limits for spurious emissions, as defined in ITU-R Recommendation SM.329 1, are applied. 9.2.3 Spurious emissions: Co-existence with other systems in the same geographical area These requirements may apply in geographic areas in which both UTRA FDD Repeater and GSM900 DCS1800, PCS1900, GSM850 and/or UTRA FDD operating in another frequency band are deployed. 9.2.4 Spurious emissions: Co-existence with co-located and co-sited base stations These requirements may be applied for the prote