ETSI TS 125 141-2018 Universal Mobile Telecommunications System (UMTS) Base Station (BS) conformance testing (FDD) (V15 3 0 3GPP TS 25 141 version 15 3 0 Release 15).pdf

1、 ETSI TS 125 141 V15.3.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 15.3.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 141 V15.3.0 (2018-07)13GPP TS 25.141 version 15.3.0 Release 15Reference RTS/TSGR-04251

2、41vf30 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can b

3、e downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

4、existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be

5、 subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.

6、org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified witho

7、ut the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI

8、 registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 141 V15.3.0 (2018-07)23GPP TS 25.141 version 15.3.0 Release 15

9、Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “I

10、ntellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, i

11、ncluding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may inclu

12、de trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the presen

13、t document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or

14、 reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs ter

15、minology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed

16、in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 141 V15.3.0 (2018-07)33GPP TS 25.141 version 15.3.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 15g31 Scope 16g32 References 16g33 Definitions and abbreviations . 17g

17、33.1 Definitions 17g33.2 Symbols 19g33.3 Abbreviations . 20g33.4 Radio Frequency bands 21g33.4.1 Frequency bands . 21g33.4.2 TX-RX frequency separation 24g33.5 Channel arrangement 25g33.5.1 Channel spacing 25g33.5.2 Channel raster . 25g33.5.3 Channel number 25g34 General test conditions and declarat

18、ions 28g34.1 Acceptable uncertainty of Test System 28g34.1.1 Measurement of test environments . 28g34.1.2 Measurement of transmitter 29g34.1.3 Measurement of receiver 32g34.1.4 Measurement of performance requirement . 33g34.2 Test Tolerances (informative) 35g34.2.1 Transmitter 35g34.2.2 Receiver 36g

19、34.2.3 Performance requirement 36g34.2.4 RRM measurements 36g34.3 Interpretation of measurement results 36g34.3A Base station classes 37g34.4 Test environments 37g34.4.1 Normal test environment 37g34.4.2 Extreme test environment . 38g34.4.2.1 Extreme temperature . 38g34.4.3 Vibration . 38g34.4.4 Pow

20、er supply 38g34.4.5 Definition of Additive White Gaussian Noise (AWGN) Interferer 39g34.5 Selection of configurations for testing 39g34.6 BS Configurations 39g34.6.1 Receiver diversity . 39g34.6.2 Duplexers 39g34.6.3 Power supply options 40g34.6.4 Ancillary RF amplifiers 40g34.6.5 BS using antenna a

21、rrays 40g34.6.5.1 Receiver tests 41g34.6.5.2 Transmitter tests 41g34.6.6 Transmit diversity and MIMO transmission . 42g34.6.7 BS with integrated Iuant BS modem 42g34.6.8 BS with Virtual Antenna Mapping . 42g34.7 Regional requirements 43g34.8 Specified frequency range 46g34.8.1 Base Station RF Bandwi

22、dth position for non-single carrier testing 46g34.9 Applicability of requirements . 47g34.10 Requirements for contiguous and non-contiguous spectrum 47g3ETSI ETSI TS 125 141 V15.3.0 (2018-07)43GPP TS 25.141 version 15.3.0 Release 154.11 Manufacturers declarations of regional and optional requirement

23、s 47g34.11.1 Operating band and frequency range 47g34.11.2 Spurious emissions category . 47g34.11.3 Additional out of band emissions . 48g34.11.4 Co-existence with other systems . 48g34.11.5 Co-location with other base stations . 48g34.11.6 Manufacturers declarations of supported RF configurations .

24、 48g34.12 Test configuration for multi-carrier operations 49g34.12.1 UTC1: Contiguous spectrum operation test configuration . 50g34.12.1.1 UTC1 power allocation . 50g34.12.2 UTC2: Non-contiguous spectrum operation test configuration 50g34.12.2.1 UTC2 power allocation . 50g34.12.3 Multi-band operatio

25、n test configurations 50g34.12.3.1 UTC3: Multi-band test configuration for full carrier allocation 50g34.12.3.1.1 UTC3 power allocation . 51g34.12.3.2 UTC4: Multi-band test configuration with high PSD per carrier 51g34.12.3.2.1 UTC4 power allocation . 52g34.12.4 Applicability of test configurations

26、52g34.13 Requirements for BS capable of multi-band operation 54g35 Format and interpretation of tests . 55g36 Transmitter . 55g36.1 General . 55g36.1.1 Test Models 56g36.1.1.1 Test Model 1 TM1 . 56g36.1.1.2 Test Model 2 TM2 . 60g36.1.1.3 Test Model 3 TM3 . 60g36.1.1.4 Test Model 4 TM4 . 61g36.1.1.4A

27、 Test Model 5 TM5 . 62g36.1.1.4B Test Model 6 TM6 . 63g36.1.1.5 DPCH Structure of the Downlink Test Models . 65g36.1.1.6 Common channel Structure of the Downlink Test Models . 66g36.1.1.6.1 P-CCPCH 66g36.1.1.6.2 PICH 66g36.1.1.6.3 Primary scrambling code and SCH 66g36.1.1.6.4 S-CCPCH containing PCH

28、66g36.1.1.7 HS-PDSCH Structure of the Downlink TM5 66g36.1.1.8 HS-SCCH Structure of the Downlink Test Models 5 and 6 67g36.1.1.9 HS-PDSCH Structure of the Downlink TM6 67g36.2 Base station output power 67g36.2.1 Base station maximum output power 67g36.2.1.1 Definition and applicability . 67g36.2.1.2

29、 Minimum Requirement . 67g36.2.1.3 Test purpose 67g36.2.1.4 Method of test . 68g36.2.1.4.1 Initial conditions 68g36.2.1.4.2 Procedure . 68g36.2.1.5 Test Requirements . 68g36.2.2 Primary CPICH power accuracy . 68g36.2.2.1 Definition and applicability . 68g36.2.2.2 Minimum Requirement . 68g36.2.2.3 Te

30、st purpose 69g36.2.2.4 Method of test . 69g36.2.2.4.1 Initial conditions 69g36.2.2.4.2 Procedure . 69g36.2.2.5 Test Requirement 69g36.2.3 Secondary CPICH power offset accuracy . 69g36.2.3.1 Definition and applicability . 69g36.2.3.2 Minimum Requirement . 69g36.2.3.3 Test purpose 70g36.2.3.4 Method o

31、f test for MIMO mode 70g3ETSI ETSI TS 125 141 V15.3.0 (2018-07)53GPP TS 25.141 version 15.3.0 Release 156.2.3.4.1 Initial conditions 70g36.2.3.4.2 Procedure . 70g36.2.3.4A Method of test for MIMO mode with four transmit antennas . 70g36.2.3.4A.1 Initial conditions 70g36.2.3.4A.2 Procedure . 70g36.2.

32、3.5 Test Requirement for MIMO mode 71g36.2.3.5A Test Requirement for MIMO mode with four transmit antennas 71g36.3 Frequency error 71g36.3.1 Definition and applicability 71g36.3.2 Minimum Requirement . 71g36.3.3 Test purpose 71g36.3.4 Method of test . 71g36.3.5 Test requirement . 71g36.4 Output powe

33、r dynamics 72g36.4.1 Inner loop power control . 72g36.4.2 Power control steps . 72g36.4.2.1 Definition and applicability . 72g36.4.2.2 Minimum Requirement . 72g36.4.2.3 Test purpose 72g36.4.2.4 Method of test . 72g36.4.2.4.1 Initial conditions 72g36.4.2.4.2 Procedure . 73g36.4.2.5 Test requirement .

34、 73g36.4.3 Power control dynamic range . 73g36.4.3.1 Definition and applicability . 73g36.4.3.2 Minimum Requirement . 74g36.4.3.3 Test purpose 74g36.4.3.4 Method of test . 74g36.4.3.4.1 Initial conditions 74g36.4.3.4.2 Procedure . 74g36.4.3.5 Test requirement . 74g36.4.4 Total power dynamic range 74

35、g36.4.4.1 Definition and applicability . 74g36.4.4.2 Minimum Requirement . 74g36.4.4.3 Test purpose 75g36.4.4.4 Method of test . 75g36.4.4.4.1 Initial Conditions . 75g36.4.4.4.2 Procedure . 75g36.4.4.5 Test requirement . 75g36.4.5 IPDL time mask 75g36.4.5.1 Definition and applicability . 75g36.4.5.2

36、 Minimum Requirement . 75g36.4.5.3 Test purpose 75g36.4.5.4 Method of test . 76g36.4.5.4.1 Initial conditions 76g36.4.5.4.2 Procedure . 76g36.4.5.5 Test Requirements . 76g36.4.6 Home base station output power for adjacent channel protection . 77g36.4.6.1 Definition and applicability . 77g36.4.6.2 Mi

37、nimum Requirement . 77g36.4.6.3 Test purpose 77g36.4.6.4 Method of test . 78g36.4.6.4.1 Initial conditions 78g36.4.6.4.2 Procedure . 78g36.4.6.5 Test Requirements . 78g36.5 Output RF spectrum emissions . 79g36.5.1 Occupied bandwidth . 79g36.5.1.1 Definition and applicability . 79g36.5.1.2 Minimum Re

38、quirements 79g36.5.1.3 Test purpose 79g36.5.1.4 Method of test . 79g36.5.1.4.1 Initial conditions 79g3ETSI ETSI TS 125 141 V15.3.0 (2018-07)63GPP TS 25.141 version 15.3.0 Release 156.5.1.4.2 Procedure . 79g36.5.1.5 Test requirements 80g36.5.2 Out of band emission 80g36.5.2.1 Spectrum emission mask .

39、 80g36.5.2.1.1 Definitions and applicability . 80g36.5.2.1.2 Minimum Requirements 80g36.5.2.1.3 Test purpose 80g36.5.2.1.4 Method of test 80g36.5.2.1.4.1 Initial conditions 80g36.5.2.1.4.2 Procedures . 81g36.5.2.1.5 Test requirements 81g36.5.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 89g36.5.

40、2.2.1 Definition and applicability . 89g36.5.2.2.2 Minimum Requirement . 89g36.5.2.2.3 Test purpose 90g36.5.2.2.4 Method of test 90g36.5.2.2.4.1 Initial conditions 90g36.5.2.2.4.2 Procedure . 90g36.5.2.2.5 Test Requirement. 90g36.5.2.2.6 Cumulative ACLR test requirement in non-contiguous spectrum or

41、 multiple-bands 91g36.5.3 Spurious emissions . 92g36.5.3.1 Definition and applicability . 92g36.5.3.2 (void) . 93g36.5.3.3 (void) . 93g36.5.3.4 Minimum Requirements 93g36.5.3.5 Test purpose 93g36.5.3.6 Method of Test 93g36.5.3.6.1 Initial conditions 93g36.5.3.6.2 Procedure . 94g36.5.3.7 Test require

42、ments 94g36.5.3.7.1 Spurious emissions (Category A) 94g36.5.3.7.2 Spurious emissions (Category B) 94g36.5.3.7.3 Protection of the BS receiver of own or different BS 95g36.5.3.7.4 Co-existence with other systems in the same geographical area . 97g36.5.3.7.5 Co-existence with co-located and co-sited b

43、ase stations . 103g36.5.3.7.6 Co-existence with PHS 112g36.5.3.7.7 Co-existence with services in adjacent frequency bands . 112g36.5.3.7.8 Void . 113g36.5.3.7.8.1 Void . 113g36.5.3.7.8.2 Void . 113g36.5.3.7.9 Protection of Public Safety Operations 113g36.5.3.7.10 Co-existence with Home BS operating

44、in other bands 113g36.6 Transmitter intermodulation . 116g36.6.1 Definition and applicability 116g36.6.2 Minimum Requirement . 116g36.6.3 Test purpose 116g36.6.4 Method of test . 116g36.6.4.1 Initial conditions . 116g36.6.4.2 Procedures . 117g36.6.5 Test Requirements 117g36.7 Transmit modulation 118

45、g36.7.1 Error Vector Magnitude 118g36.7.1.1 Definition and applicability . 118g36.7.1.2 Minimum Requirement . 118g36.7.1.3 Test Purpose 118g36.7.1.4 Method of Test 118g36.7.1.4.1 Initial Conditions . 118g36.7.1.4.2 Procedure . 118g36.7.1.5 Test Requirement 119g36.7.2 Peak Code Domain Error 119g36.7.

46、2.1 Definition and applicability . 119g36.7.2.2 Minimum requirement 119g3ETSI ETSI TS 125 141 V15.3.0 (2018-07)73GPP TS 25.141 version 15.3.0 Release 156.7.2.3 Test Purpose 119g36.7.2.4 Method of test . 119g36.7.2.4.1 Initial conditions 119g36.7.2.4.2 Procedure . 119g36.7.2.5 Test requirement . 120g

47、36.7.3 Time alignment error 120g36.7.3.1 Definition and applicability . 120g36.7.3.2 Minimum Requirement . 120g36.7.3.3 Test Purpose 120g36.7.3.4 Method of Test 120g36.7.3.4.1 Initial Conditions . 120g36.7.3.4.2 Procedure . 120g36.7.3.5 Test Requirement 121g36.7.4 Relative Code Domain Error 121g36.7

48、.4.1 Definition and applicability . 121g36.7.4.2 Minimum requirement 121g36.7.4.3 Test Purpose 121g36.7.4.4 Method of test . 121g36.7.4.4.1 Initial conditions 121g36.7.4.4.2 Procedure . 122g36.7.4.5 Test requirement . 122g37 Receiver characteristics 122g37.1 General . 122g37.2 Reference sensitivity

49、level 123g37.2.1 Definition and applicability 123g37.2.2 Minimum Requirement . 123g37.2.3 Test purpose 123g37.2.4 Method of testing 123g37.2.4.1 Initial conditions . 123g37.2.4.2 Procedure 123g37.2.5 Test requirement . 124g37.3 Dynamic range . 124g37.3.1 Definition and applicability 124g37.3.2 Minimum Requirement . 124g37.3.3 Test purpose 124g37.3.4 Method of test . 124g37.3.4.1 Initial conditions . 124g37.3.4.2 Procedure 124g37.3.5 Test Requirements 125g37.4 Adjacent Channel Selectivity (ACS) 125g37.4.1 Definition and applicability 125g37.4.2 Minimum Requirement