ETSI TS 125 142-2017 Universal Mobile Telecommunications System (UMTS) Base Station (BS) conformance testing (TDD) (V14 0 0 3GPP TS 25 142 version 14 0 0 Release 14)《通用移动通信系统(UMTS).pdf

1、 ETSI TS 125 142 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (TDD) (3GPP TS 25.142 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125 142 V14.0.0 (2017-04)13GPP TS 25.142 version 14.0.0 Release 14Reference RTS/TSGR-04251

2、42ve00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can b

3、e downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

4、existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be

5、 subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.

6、org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified witho

7、ut the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Mem

8、bers. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 142 V14.0.0 (2017

9、-04)23GPP TS 25.142 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be fou

10、nd in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Po

11、licy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Te

12、chnical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding E

13、TSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to

14、 be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 142 V14.0.0 (2017-04)33GPP TS 25.142 version 14.0.0 Release 14Conten

15、ts Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 17g31 Scope 18g32 References 18g33 Definitions, symbols, and abbreviations 19g33.1 Definitions 19g33.2 Symbols 20g33.3 Abbreviations . 20g34 Frequency bands and channel arrangement 22g34.1 General . 22g34.2 Freque

16、ncy bands . 22g34.3 TX-RX frequency separation . 23g34.3.1 3,84 Mcps TDD option . 23g34.3.2 1,28 Mcps TDD option . 23g34.3.3 7,68 Mcps TDD option . 23g34.4 Channel arrangement 23g34.4.1 Channel spacing 23g34.4.1.1 3,84 Mcps TDD option . 23g34.4.1.2 1,28 Mcps TDD option . 23g34.4.1.3 7,68 Mcps TDD op

17、tion . 23g34.4.2 Channel raster . 23g34.4.2.1 3,84 Mcps TDD Option . 23g34.4.3 Channel number 23g35 General test conditions and declarations 24g35.1 Base station classes 24g35.1.1 Applicability of requirements and BS class definition . 24g35.1.2 Manufacturers declaration of supported RF configuratio

18、ns 24g35.2 Output power 25g35.3 Specified frequency range and supported channel bandwidth 25g35.3.1 RF bandwidth position for multi-carrier testing 26g35.4 Relationship between RF generation and chip clock 26g35.5 Spectrum emission mask 26g35.6 Adjacent Channel Leakage power Ratio (ACLR) 26g35.7 Tx

19、spurious emissions 27g35.7.1 Category of spurious emissions limit 27g35.7.2 Co-existence with GSM 27g35.7.3 Co-existence with DCS 1800 27g35.7.4 Co-existence with UTRA FDD . 27g35.7.5 Co-existence with unsynchronised UTRA TDD and/or E-UTRA TDD . 28g35.8 Blocking characteristics . 28g35.9 Test enviro

20、nments 28g35.9.1 Normal test environment 28g35.9.2 Extreme test environment . 29g35.9.2.1 Extreme temperature . 29g35.9.3 Vibration . 29g35.9.4 Power supply 29g35.10 Acceptable uncertainty of Test System . 30g35.10.1 Measurement of test environments . 30g35.10.2 Measurement of transmitter 31g35.10.3

21、 Measurement of receiver 36g35.10.4 Measurement of performance requirements . 38g3ETSI ETSI TS 125 142 V14.0.0 (2017-04)43GPP TS 25.142 version 14.0.0 Release 145.11 Test Tolerances (informative) . 38g35.11.1 Transmitter 39g35.11.2 Receiver 41g35.11.3 Performance requirements 41g35.12 Interpretation

22、 of measurement results 41g35.13 Selection of configurations for testing 42g35.14 BS Configurations 42g35.14.1 Receiver diversity . 42g35.14.2 Duplexers 43g35.14.3 Power supply options 43g35.14.4 Ancillary RF amplifiers 43g35.14.5 BS using antenna arrays 43g35.14.5.1 Receiver tests 43g35.14.5.2 Tran

23、smitter tests 44g35.14.6 MIMO transmission 44g35.15 Overview of the conformance test requirements 44g35.16 Format and interpretation of tests . 46g35.17 Regional requirements 46g35.18 Definition of Additive White Gaussian Noise (AWGN) Interferer 47g35.19 Applicability of requirements . 47g35.20 Test

24、 configurations for multi-carrier operation 48g35.20.1 UTTC1: Multi-carrier operation test configuration 48g35.20.1.1 UTTC1 generation 48g35.20.1.1 UTTC1 power allocation 48g35.20.2 UTTC2: Multi-band test configuration for full carrier allocation . 48g35.20.2.1 UTTC2 generation 48g35.20.2.2 UTTC2 po

25、wer allocation . 49g35.21 Applicability of test configurations 49g35.22 Requirements for BS capable of multi-band operation 51g36 Transmitter characteristics . 52g36.1 General . 52g36.1.1 IMB Test Models 52g36.1.1.1 IMB Test Model 1 - TM 1 . 52g36.1.1.2 IMB Test Model 2 - TM 2 . 53g36.2 Maximum outp

26、ut power . 53g36.2.1 Definition and applicability 53g36.2.2 Minimum Requirements . 53g36.2.3 Test purpose 53g36.2.4 Method of test . 53g36.2.4.1 Initial conditions . 53g36.2.4.1.0 General test conditions 53g36.2.4.1.1 3,84 Mcps TDD option 54g36.2.4.1.2 1,28 Mcps TDD option 54g36.2.4.1.3 7,68 Mcps TD

27、D option 54g36.2.4.2 Procedure 55g36.2.4.2.1 3,84 Mcps TDD option 55g36.2.4.2.2 1,28 Mcps TDD option 55g36.2.4.2.3 7,68 Mcps TDD option 55g36.2.5 Test Requirements 55g36.3 Frequency stability . 56g36.3.1 Definition and applicability 56g36.3.2 Minimum Requirements . 56g36.3.3 Test purpose 56g36.3.4 M

28、ethod of test . 56g36.3.4.1 Initial conditions . 56g36.3.4.1.0 General test conditions 56g36.3.4.1.1 3,84 Mcps TDD option 56g36.3.4.1.2 1,28 Mcps TDD option 57g36.3.4.1.3 7,68 Mcps TDD option 57g36.3.4.2 Procedure 58g36.3.5 Test Requirements 58g3ETSI ETSI TS 125 142 V14.0.0 (2017-04)53GPP TS 25.142

29、version 14.0.0 Release 146.4 Output power dynamics 58g36.4.1 Inner loop power control . 58g36.4.2 Power control steps . 58g36.4.2.1 Definition and applicability . 58g36.4.2.2 Minimum Requirements 58g36.4.2.3 Test purpose 59g36.4.2.4 Method of test . 59g36.4.2.4.1 Initial conditions 59g36.4.2.4.1.0 G

30、eneral test conditions . 59g36.4.2.4.1.1 3,84 Mcps TDD option 59g36.4.2.4.1.2 1,28 Mcps TDD option 60g36.4.2.4.1.3 7,68 Mcps TDD option 60g36.4.2.4.2 Procedure . 61g36.4.2.4.2.1 3,84 Mcps TDD option 61g36.4.2.4.2.2 1,28 Mcps TDD option 61g36.4.2.4.2.3 7,68 Mcps TDD option 61g36.4.2.5 Test Requiremen

31、ts . 62g36.4.2.5.1 3,84 Mcps TDD option 62g36.4.2.5.2 1,28 Mcps TDD option 62g36.4.2.5.3 7,68 Mcps TDD option 62g36.4.3 Power control dynamic range . 63g36.4.3.1 Definition and applicability . 63g36.4.3.2 Minimum Requirements 63g36.4.3.3 Test purpose 63g36.4.3.4 Method of test . 63g36.4.3.4.1 Initia

32、l conditions 63g36.4.3.4.1.0 General test conditions . 63g36.4.3.4.1.1 3,84 Mcps TDD option 63g36.4.3.4.1.2 1,28 Mcps TDD option 64g36.4.3.4.1.3 7,68 Mcps TDD option 64g36.4.3.4.2 Procedure . 65g36.4.3.4.2.1 3,84 Mcps TDD option 65g36.4.3.4.2.2 1,28 Mcps TDD option 65g36.4.3.4.2.3 7,68 Mcps TDD opti

33、on 65g36.4.3.5 Test Requirements . 66g36.4.4 Minimum output power 66g36.4.4.1 Definition and applicability . 66g36.4.4.2 Minimum Requirements 66g36.4.4.3 Test purpose 66g36.4.4.4 Method of test . 66g36.4.4.4.1 Initial conditions 66g36.4.4.4.1.0 General test conditions . 66g36.4.4.4.1.1 3,84 Mcps TDD

34、 option 66g36.4.4.4.1.2 1,28 Mcps TDD option 67g36.4.4.4.1.3 7,68 Mcps TDD option 67g36.4.4.4.2 Procedure . 68g36.4.4.4.2.1 3,84 Mcps TDD option 68g36.4.4.4.2.2 1,28 Mcps TDD option 68g36.4.4.4.2.3 7,68 Mcps TDD option 68g36.4.4.5 Test Requirements . 69g36.4.5 Primary CCPCH power 69g36.4.5.1 Definit

35、ion and applicability . 69g36.4.5.2 Minimum Requirements 69g36.4.5.3 Test purpose 69g36.4.5.4 Method of test . 70g36.4.5.4.1 Initial conditions 70g36.4.5.4.1.0 General test conditions . 70g36.4.5.4.1.1 3,84 Mcps TDD option 70g36.4.5.4.1.2 1,28 Mcps TDD option 70g36.4.5.4.1.3 7,68 Mcps TDD option 70g

36、36.4.5.4.2 Procedure . 71g36.4.5.4.2.1 3,84 Mcps TDD option 71g3ETSI ETSI TS 125 142 V14.0.0 (2017-04)63GPP TS 25.142 version 14.0.0 Release 146.4.5.4.2.2 1,28 Mcps TDD option 71g36.4.5.4.2.3 7,68 Mcps TDD option 71g36.4.5.5 Test Requirements . 71g36.4.6 Differential accuracy of Primary CCPCH power

37、72g36.4.6.1 Definition and applicability . 72g36.4.6.2 Minimum Requirements 72g36.4.6.3 Test purpose 72g36.4.6.4 Method of test . 72g36.4.6.4.1 Initial conditions 72g36.4.6.4.1.0 General test conditions . 72g36.4.6.4.1.1 3,84 Mcps TDD option 72g36.4.6.4.1.2 1,28 Mcps TDD option 73g36.4.6.4.1.3 7,68

38、Mcps TDD option 73g36.4.6.4.2 Procedure . 74g36.4.6.4.2.1 3,84 Mcps TDD option 74g36.4.6.4.2.2 1,28 Mcps TDD option 74g36.4.6.4.2.3 7,68 Mcps TDD option 74g36.4.6.5 Test Requirements . 74g36.5 Transmit ON/OFF power . 74g36.5.1 Transmit OFF power . 74g36.5.1.1 Definition and applicability . 74g36.5.1

39、.2 Minimum Requirements 74g36.5.1.2.1 3,84 Mcps TDD option 74g36.5.1.2.2 1,28 Mcps TDD option 75g36.5.1.2.3 7,68 Mcps TDD option 75g36.5.1.3 Test purpose 75g36.5.1.4 Method of test . 75g36.5.1.4.1 Initial conditions 75g36.5.1.4.2 Procedure . 75g36.5.1.5 Test Requirements . 75g36.5.2 Transmit ON/OFF

40、time mask . 75g36.5.2.1 Definition and applicability . 75g36.5.2.2 Minimum Requirements 75g36.5.2.2.1 3,84 Mcps TDD option 75g36.5.2.2.2 1,28 Mcps TDD option 76g36.5.2.2.3 7,68 Mcps TDD option 76g36.5.2.3 Test purpose 77g36.5.2.4 Method of test . 77g36.5.2.4.1 Initial conditions 77g36.5.2.4.1.0 Gene

41、ral test conditions . 77g36.5.2.4.1.1 3,84 Mcps TDD option 77g36.5.2.4.1.2 1,28 Mcps TDD option 78g36.5.2.4.1.3 7,68 Mcps TDD option 78g36.5.2.4.2 Procedure . 78g36.5.2.4.2.1 3,84 Mcps TDD option 78g36.5.2.4.2.2 1,28 Mcps TDD option 78g36.5.2.4.2.3 7,68 Mcps TDD option 79g36.5.2.5 Test Requirements

42、. 79g36.5.2.5.1 3,84 Mcps TDD option 79g36.5.2.5.2 1,28 Mcps TDD option 79g36.5.2.5.3 7,68 Mcps TDD option 79g36.6 Output RF spectrum emissions . 79g36.6.1 Occupied bandwidth . 79g36.6.1.1 Definition and applicability . 79g36.6.1.2 Minimum Requirements 79g36.6.1.2.1 3,84 Mcps TDD option 79g36.6.1.2.

43、2 1,28 Mcps TDD option 79g36.6.1.2.3 7,68 Mcps TDD option 79g36.6.1.3 Test purpose 80g36.6.1.4 Method of test . 80g36.6.1.4.1 Initial conditions 80g36.6.1.4.1.0 General test conditions . 80g3ETSI ETSI TS 125 142 V14.0.0 (2017-04)73GPP TS 25.142 version 14.0.0 Release 146.6.1.4.1.1 3,84 Mcps TDD opti

44、on 80g36.6.1.4.1.2 1,28 Mcps TDD option 80g36.6.1.4.1.3 7,68 Mcps TDD option 81g36.6.1.4.2 Procedure . 81g36.6.1.4.2.1 3,84 Mcps TDD option 81g36.6.1.4.2.2 1,28 Mcps TDD option 81g36.6.1.4.2.3 7,68 Mcps TDD option 82g36.6.1.5 Test Requirements . 82g36.6.1.5.1 3,84 Mcps TDD option 82g36.6.1.5.2 1,28

45、Mcps TDD option 82g36.6.1.5.3 7,68 Mcps TDD option 82g36.6.2 Out of band emission 82g36.6.2.1 Spectrum emission mask . 83g36.6.2.1.1 Definition and applicability . 83g36.6.2.1.1.1 3,84 Mcps TDD option 83g36.6.2.1.1.2 1,28 Mcps TDD option 83g36.6.2.1.1.3 7,68 Mcps TDD option 83g36.6.2.1.2 Minimum Req

46、uirements 83g36.6.2.1.2.1 3,84 Mcps TDD option 83g36.6.2.1.2.2 1,28 Mcps TDD option 84g36.6.2.1.2.3 7,68 Mcps TDD option 86g36.6.2.1.3 Test purpose 87g36.6.2.1.4 Method of test 87g36.6.2.1.4.1 Initial conditions 87g36.6.2.1.4.1.0 General test conditions . 87g36.6.2.1.4.1.1 3,84 Mcps TDD option - Gen

47、eral test set up 87g36.6.2.1.4.1.2 1,28 Mcps TDD option - General test set up 87g36.6.2.1.4.1.3 1,28 Mcps TDD option - Special test set up for 16QAM capable BS 88g36.6.2.1.4.1.4 3,84 Mcps TDD option - Special test set up for 16QAM capable BS 88g36.6.2.1.4.1.5 7,68 Mcps TDD option - General test set

48、up 89g36.6.2.1.4.1.6 7,68 Mcps TDD option - Special test set up for 16QAM capable BS 89g36.6.2.1.4.2 Procedure . 90g36.6.2.1.4.2.1 3,84 Mcps TDD option . 90g36.6.2.1.4.2.2 1,28 Mcps TDD option . 90g36.6.2.1.4.2.3 1,28 Mcps TDD option - 16QAM capable BS . 90g36.6.2.1.4.2.4 3,84 Mcps TDD option - 16QA

49、M capable BS . 90g36.6.2.1.4.2.5 7,68 Mcps TDD option . 90g36.6.2.1.4.2.6 7,68 Mcps TDD option - 16QAM capable BS . 90g36.6.2.1.5 Test Requirements . 91g36.6.2.1.5.1 3,84 Mcps TDD option 91g36.6.2.1.5.2 1,28 Mcps TDD option 92g36.6.2.1.5.3 1,28 Mcps TDD option - 16QAM capable BS . 93g36.6.2.1.5.4 3,84 Mcps TDD option - 16QAM capable BS . 93g36.6.2.1.5.5 7,68 Mcps TDD option 93g36.6.2.1.5.6 7,68 Mcps TDD option - 16QAM capable BS . 94g36.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 94g36.6.2.2.1 Definition and applicability . 94g36.6.2.2.2 Minimum Requirements 94g36.6.