ETSI TS 125 172-2017 Universal Mobile Telecommunications System (UMTS) Requirements for support of Assisted Galileo and Additional Navigation Satellite Systems (A-GANSS) Frequency .pdf

1、 ETSI TS 125 172 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); Requirements for support of Assisted Galileo and Additional Navigation Satellite Systems (A-GANSS) Frequency Division Duplex (FDD) (3GPP TS 25.172 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125

2、 172 V14.0.0 (2017-04)13GPP TS 25.172 version 14.0.0 Release 14Reference RTS/TSGR-0425172ve00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre

3、 la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document

4、 shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within E

5、TSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present d

6、ocument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by

7、 written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM

8、, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trad

9、e Marks registered and owned by the GSM Association. ETSI ETSI TS 125 172 V14.0.0 (2017-04)23GPP TS 25.172 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essenti

10、al IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates a

11、re available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) w

12、hich are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or

13、 GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “

14、should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation

15、. ETSI ETSI TS 125 172 V14.0.0 (2017-04)33GPP TS 25.172 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols, abbreviations and test tolerances . 7g33.1 Definitions 7g33.2 Symbols 7g

16、33.3 Abbreviations . 7g33.4 Test tolerances 8g34 General . 8g34.1 Introduction 8g34.2 Measurement parameters 9g34.2.1 UE-based A-GANSS measurement parameters 9g34.2.2 UE-assisted A-GANSS measurement parameters 9g34.3 Response time 9g34.4 Time assistance 9g34.4.1 Use of fine time assistance 9g34.5 RR

17、C states 10g34.6 2D position error 10g34.7 User equipment supporting multiple constellations . 10g34.8 User equipment supporting multiple signals 10g35 A-GANSS minimum performance requirements . 10g35.1 Sensitivity . 11g35.1.1 Coarse time assistance 11g35.1.1.1 Minimum requirements (coarse time assi

18、stance) 11g35.1.2 Fine time assistance 12g35.1.2.1 Minimum requirements (fine time assistance) 12g35.2 Nominal accuracy . 12g35.2.1 Minimum requirements (nominal accuracy) . 13g35.3 Dynamic range . 13g35.3.1 Minimum requirements (dynamic range) . 14g35.4 Multi-path scenario. 14g35.4.1 Minimum requir

19、ements (multi-path scenario) 15g35.5 Moving scenario and periodic update . 15g35.5.1 Minimum requirements (moving scenario and periodic update) 16g3Annex A (normative): Test cases 18g3A.1 Conformance tests 18g3A.2 Requirement classification for statistical testing 18g3Annex B (normative): Test condi

20、tions 19g3B.1 General . 19g3B.1.1 Parameter values 19g3B.1.2 Time assistance 19g3B.1.3 GANSS reference time . 19g3B.1.4 Reference and UE locations . 20g3B.1.5 Satellite constellation and assistance data 20g3B.1.6 Atmospheric delay 20g3B.1.7 Sensors . 20g3ETSI ETSI TS 125 172 V14.0.0 (2017-04)43GPP T

21、S 25.172 version 14.0.0 Release 14B.1.8 Information elements 20g3B.1.9 GNSS signals 20g3B.1.10 RESET UE POSITIONING STORED INFORMATION Message . 20g3B.1.11 GNSS system time offsets 21g3Annex C (normative): Propagation conditions 22g3C.1 Static propagation conditions . 22g3C.2 Multi-path case . 22g3A

22、nnex D (normative): Measurement sequence chart . 23g3D.1 General . 23g3D.2 TTFF measurement sequence chart 23g3D.3 Periodic update measurement sequence chart 24g3Annex E (normative): Assistance data required for testing . 26g3E.1 Introduction 26g3E.2 GPS assistance data 26g3E.3 GANSS assistance data

23、 26g3Annex F (normative): Converting UE-assisted measurement reports into position estimates . 30g3F.1 Introduction 30g3F.2 UE measurement reports 30g3F.3 Weighted Least Squares (WLS) position solution . 31g3Annex G (informative): Change history . 34g3History 35g3ETSI ETSI TS 125 172 V14.0.0 (2017-0

24、4)53GPP TS 25.172 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify t

25、he contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG appr

26、oved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 172 V14.0.0 (2017-04)63GPP

27、 TS 25.172 version 14.0.0 Release 141 Scope The present document establishes the minimum performance requirements for A-GANSS for FDD mode of UTRA for the User Equipment (UE) that supports A-GANSS. It includes the minimum performance requirements for both UE-based and UE-assisted A-GANSS. The minimu

28、m performance requirements also include combinations of A-GPS and A-GANSS. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number

29、, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest versi

30、on of that document in the same Release as the present document. 1 3GPP TS 25.101: “User Equipment (UE) radio transmission and reception (FDD)“. 2 3GPP TS 25.104: “Base Station (BS) radio transmission and reception (FDD)“. 3 IS-GPS-200, Revision D, “Navstar GPS Space Segment/Navigation User Interfac

31、es“, March 7th, 2006. 4 IS-GPS-705, “Navstar GPS Space Segment/User Segment L5 Interfaces“, September 22, 2005. 5 IS-GPS-800, “Navstar GPS Space Segment/User Segment L1C Interfaces“, September 4, 2008. 6 IS-QZSS, “Quasi Zenith Satellite System Navigation Service Interface Specifications for QZSS“, V

32、er.1.1, July 31, 2009. 7 “Galileo OS Signal in Space ICD (OS SIS ICD)“, Draft 0, Galileo Joint Undertaking, May 23rd, 2006. 8 “Global Navigation Satellite System GLONASS Interface Control Document“, Version 5.1, 2008. 9 “Specification for the Wide Area Augmentation System (WAAS) “, US Department of

33、Transportation, Federal Aviation Administration, DTFA01-96-C-00025, 2001. 10 3GPP TS 25.171: “Requirements for support of Assisted Global Positioning System (A-GPS) Frequency Division Duplex (FDD)“. 11 3GPP TS 34.171: “Terminal Conformance Specification, Assisted Global Positioning System (A-GPS) (F

34、DD)“. 12 3GPP TS 34.172: “Terminal Conformance Specification, Assisted Galileo and Additional Navigation Satellite Systems (A-GANSS) (FDD)“. 13 3GPP TS 34.109: “Special conformance testing functions“. 14 3GPP TS 25.331: “Radio Resource Control (RRC) protocol specification“. 15 ETSI TR 102 273-1-2: “

35、Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 2: Examples and

36、 annexes“. ETSI ETSI TS 125 172 V14.0.0 (2017-04)73GPP TS 25.172 version 14.0.0 Release 1416 P. Axelrad, R.G. Brown, “GPS Navigation Algorithms“, in Chapter 9 of “Global Positioning System: Theory and Applications“, Volume 1, B.W. Parkinson, J.J. Spilker (Ed.), Am. Inst. of Aeronautics and Astronaut

37、ics Inc., 1996. 17 S.K. Gupta, “Test and Evaluation Procedures for the GPS User Equipment“, ION-GPS Red Book, Volume 1, p. 119. 18 3GPP TS 25.215: “Physical layer; Measurements (FDD)“. 19 BeiDou Navigation Satellite System Signal In Space Interface Control Document Open Service Signal B1I(Version 1.

38、0), China Satellite Navigation Office, December 2012. 3 Definitions, symbols, abbreviations and test tolerances 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TS 25.101 1, 3GPP TS 25.104 2 and the following apply: Horizontal Dilution Of Precision (H

39、DOP): measure of position determination accuracy that is a function of the geometrical layout of the satellites used for the fix, relative to the receiver antenna. 3.2 Symbols For the purposes of the present document, the following symbol applies: B1I BeiDou B1I navigation signal with carrier freque

40、ncy of 1561.098 MHz. c Speed of light. E1 Galileo E1 navigation signal with carrier frequency of 1575.420 MHz. E5 Galileo E5 navigation signal with carrier frequency of 1191.795 MHz. E6 Galileo E6 navigation signal with carrier frequency of 1278.750 MHz. G1 GLONASS navigation signal in the L1 sub-ba

41、nds with carrier frequencies 1602 MHz k 562.5 kHz. G2 GLONASS navigation signal in the L2 sub-bands with carrier frequencies 1246 MHz k 437.5 kHz. k GLONASS channel number, k = -713. L1 C/A GPS or QZSS L1 navigation signal carrying the Coarse/Acquisition code with carrier frequency of 1575.420 MHz.

42、L1C GPS or QZSS L1 Civil navigation signal with carrier frequency of 1575.420 MHz. L2C GPS or QZSS L2 Civil navigation signal with carrier frequency of 1227.600 MHz. L5 GPS or QZSS L5 navigation signal with carrier frequency of 1176.450 MHz. G Geometry Matrix. iGNSSm, Measured pseudo-range of satell

43、ite i of GNSSm. W Weighting Matrix. iGNSSm,1 Line of sight unit vector from the user to the satellite i of GNSSm. x State vector of user position and clock bias. 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: A-GANSS Assisted-Galileo and Additional Nav

44、igation Satellite Systems A-GNSS Assisted-GNSS A-GPS Assisted-Global Positioning System AWGN Additive White Gaussian Noise BDS BeiDou Navigation Satellite System ETSI ETSI TS 125 172 V14.0.0 (2017-04)83GPP TS 25.172 version 14.0.0 Release 14C/A Coarse/Acquisition DUT Device Under Test ECEF Earth-Cen

45、tered, Earth-Fixed ECI Earth-Centered-Inertial FDD Frequency Division Duplex GEO Geostationary Earth Orbit GLONASS GLObalnaya NAvigatsionnaya Sputnikovaya Sistema (Engl.: Global Navigation Satellite System) GNSS Global Navigation Satellite System GPS Global Positioning System GSS GNSS System Simulat

46、orHDOP Horizontal Dilution Of Precision ICD Interface Control Document IGSO Inclined Geosynchronous Satellite Orbit IS Interface Specification LOS Line Of Sight MEO Medium Earth Orbit QZS Quasi-Zenith Satellite QZSS Quasi-Zenith Satellite System RF Radio Frequency RRC Radio Resource Control SBAS Spa

47、ce Based Augmentation System SFN System Frame Number SS FDD System Simulator SV Space Vehicle TBD To Be Determined TOD Time Of Day TOW Time Of Week TTFF Time To First Fix UE User EquipmentUTRA Universal Terrestrial Radio Access UTRAN Universal Terrestrial Radio Access Network WLS Weighted Least Squa

48、res WGS-84 World Geodetic System 1984 3.4 Test tolerances The requirements given in the present document make no allowance for measurement uncertainty. The test specification 3GPP TS 34.172 12 defines test tolerances. These test tolerances are individually calculated for each test. The test toleranc

49、es are then added to the limits in the present document to create test limits. The measurement results are compared against the test limits as defined by the shared risk principle. Shared Risk is defined in ETR 273-1-2 15, subclause 6.5. 4 General 4.1 Introduction The present document defines the minimum performance requirements for both UE-based and UE-assisted FDD A-GANSS terminals. The minimum performance requirements also include combinations of A-GPS and A-GANSS. ETSI ETSI TS 125 172 V14.0.0 (2017-04)93GPP TS 25.17