ETSI TS 125 202-2016 Universal Mobile Telecommunications System (UMTS) 7 68 Mcps Time Division Duplex (TDD) option Overall description Stage 2 (V13 0 0 3GPP TS 25 202 version 13 0 .pdf

1、 ETSI TS 1Universal Mobile Tel7.68 Mcps TimeOveral(3GPP TS 25.2TECHNICAL SPECIFICATION125 202 V13.0.0 (2016elecommunications System (e Division Duplex (TDD) optioall description: Stage 2 .202 version 13.0.0 Release 1316-01) (UMTS); tion; 13) ETSI ETSI TS 125 202 V13.0.0 (2016-01)13GPP TS 25.202 vers

2、ion 13.0.0 Release 13Reference RTS/TSGR-0125202vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/8

3、8 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior w

4、ritten authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present docu

5、ment should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the foll

6、owing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF

7、version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI re

8、gistered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 202 V13.0.0 (2016-01)23GPP TS 25.202 v

9、ersion 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314

10、: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigatio

11、n, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification

12、 (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The

13、 cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as de

14、scribed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 202 V13.0.0 (2016-01)33GPP TS 25.202 version 13.0.0 Release 13Contents Intellectual Prope

15、rty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 7g34 Background and introduction . 7g35 Requirements 8g36 Physical layer structure 8g36.0 Services offer

16、ed to higher layers 8g36.1 Frame structure . 8g36.2 Burst structure 8g36.3 Midambles 9g36.4 Coding and Modulation 12g36.5 Scrambling Codes. 12g36.6 Synchronisation Codes . 13g36.7 Transmit diversity. 13g36.9 Indicator Channels 13g36.9.1 Paging Indicator Channel (PICH) . 13g36.9.2 MBMS Indicator Chan

17、nel (MICH) . 13g36.10 Mapping of transport channels to physical channels 13g37 Physical layer procedures . 14g37.1 Power Control 14g37.2 Timing Advance . 15g37.3 HSDPA procedures 15g37.4 Synchronisation procedures 15g37.5 RACH procedures 15g37.6 Discontinuous transmission (DTX) procedure . 15g37.7 D

18、ownlink transmit diversity procedure 15g37.8 DSCH procedure 15g37.9 Macrodiversity procedure . 15g37.10 IPDL procedure 15g37.11 E-DCH procedures . 15g38 UE capabilities . 16g39 Layer 2/3 protocol aspects 16g39.1 Protocol architecture. 16g39.2 Signalling . 16g39.2.1 General 16g39.2.2 L2/MAC differenc

19、es . 16g39.2.3 L2/RRC differences 16g39.3 HSDPA related issues 17g39.4 Mobility 17g39.5 Idle Mode Procedures . 17g39.6 E-DCH related issues . 17g310 Iub/Iur aspects 17g3ETSI ETSI TS 125 202 V13.0.0 (2016-01)43GPP TS 25.202 version 13.0.0 Release 1310.1 Impacts on Iub/Iur interfaces general aspects 1

20、7g310.1.1 Timing advance and Rx Timing Deviation . 17g310.1.2 Paging . 18g310.1.3 DSCH Power Control from the RNC 18g310.2 Impacts on Iub/Iur control plane protocols . 18g310.3 Impacts on Iub/Iur user plane protocols . 18g311 Radio aspects 18g311.1 UE radio transmission and reception 18g311.1.1 Tran

21、smitter characteristics 18g311.1.1.1 Transmit power . 18g311.1.1.2 Output RF spectrum emissions . 19g311.1.1.2.1 Occupied bandwidth 19g311.1.1.2.2 Out of band emission . 19g311.1.1.2.2.1 Spectrum emission mask 19g311.1.1.2.2.2 Adjacent Channel Leakage power Ratio (ACLR) 19g311.1.1.2.2.3 Spurious emi

22、ssions 20g311.1.2 Receiver characteristics 20g311.1.2.1 Reference sensitivity level 20g311.1.2.1.1 Minimum Requirement . 20g311.1.2.2 Adjacent Channel Selectivity (ACS) . 20g311.1.2.2.1 Minimum Requirement . 20g311.1.2.3 Blocking characteristics 21g311.1.2.3.1 Minimum Requirement . 21g311.1.2.4 Spur

23、ious response . 22g311.1.2.4.1 Minimum Requirement . 22g311.1.2.5 Spurious emissions 22g311.1.2.5.1 Minimum Requirement . 23g311.2 Base station radio transmission and reception 23g311.2.1 Transmitter characteristics 23g311.2.1.1 Base station output power . 23g311.2.1.2 Output RF spectrum emissions .

24、 23g311.2.1.2.1 Occupied bandwidth 23g311.2.1.2.2 Out of band emission . 23g311.2.1.2.2.1 Spectrum emission mask 23g311.2.1.2.2.2 Adjacent Channel Leakage power Ratio (ACLR) 25g311.2.1.2.2.2.1 Minimum requirement 25g311.2.1.2.2.3 Spurious emissions 26g311.2.2 Receiver characteristics 26g311.2.2.1 Re

25、ference sensitivity level 26g311.2.2.1.1 Minimum requirement. 26g311.2.2.2 Adjacent Channel Selectivity (ACS) . 26g311.2.2.2.1 Minimum requirement . 26g311.2.2.3 Blocking characteristics 27g311.2.2.3.1 Minimum requirement . 27g311.2.2.3.2 Collocation with GSM900 and/or DCS 1800 28g311.2.2.4 Spurious

26、 emissions 28g311.2.2.4.1 Minimum requirement . 29g3Annex A (informative): Change history . 30g3History 31g3ETSI ETSI TS 125 202 V13.0.0 (2016-01)53GPP TS 25.202 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The cont

27、ents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follo

28、ws: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.

29、z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 202 V13.0.0 (2016-01)63GPP TS 25.202 version 13.0.0 Release 131 Scope The present document is the overall technical specification for the support of the 7.68Mcps TDD option in UTRA.

30、2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent

31、 revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 25.895

32、 (V6.0.0): “Analysis of higher chip rates for UTRA TDD evolution“. 2 3GPP TS 25.221: “Physical channels and mapping of transport channels onto physical channels (TDD)“. 3 3GPP TS 25.222: “Multiplexing and channel coding (TDD)“. 4 3GPP TS 25.223: “Spreading and modulation (TDD)“. 5 3GPP TS 25.224: “P

33、hysical layer procedures (TDD)“. 6 3GPP TS 25.225: “Physical layer; Measurements (TDD)“. 7 3GPP TS 25.301: “Radio Interface Protocol Architecture“. 8 3GPP TS 25.306: “UE Radio Access capabilities“. 9 3GPP TS 25.321: “Medium Access Control (MAC) protocol specification“. 10 3GPP TS 25.102: “User Equip

34、ment (UE) radio transmission and reception (TDD)“. 11 3GPP TS 25.105 “UTRAN (BS) TDD; Radio transmission and reception“. 12 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitio

35、ns given in TR 21.905 12 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 12. (void) ETSI ETSI TS 125 202 V13.0.0 (2016-01)73GPP TS 25.202 version 13.0.0 Release 133.2 Symbols For the purposes of the present d

36、ocument, the following symbols apply: (void) 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 12 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.90

37、5 12. BCH Broadcast Channel CCPCH Common Control Physical Channel DCH Dedicated Channel DPCH Dedicated Physical Channel DSCH Downlink Shared ChannelE-AGCH E-DCH Absolute Grant Channel E-DCH Enhanced Dedicated Channel E-HICH E-DCH Hybrid ARQ Indicator Channel E-PUCH E-DCH Physical Uplink Channel E-RU

38、CCH E-DCH Random Access Uplink Control Channel FACH Forward Access Channel HS-DSCH High Speed Downlink Shared Channel HS-PDSCH High Speed Physical Downlink Shared Channel HS-SCCH Shared Control Channel for HS-DSCH HS-SICH Shared Information Channel for HS-DSCH P-CCPCH Primary CCPCH PCH Paging Channe

39、l PDSCH Physical Downlink Shared Channel PI Paging Indicator (value calculated by higher layers) PICH Page Indicator Channel PRACH Physical Random Access Channel PUSCH Physical Uplink Shared Channel RACH Random Access Channel S-CCPCH Secondary CCPCH SCH Synchronisation Channel TrCH Transport Channel

40、 USCH Uplink Shared Channel 4 Background and introduction The 7.68Mcps TDD option is an evolution of the 3.84Mcps TDD option to a higher chip rate. There exists a great degree of commonality between the 3.84Mcps TDD option and the 7.68Mcps TDD option. Nevertheless, there are many aspects of the 7.68

41、Mcps TDD option that require separate specification to the 3.84Mcps TDD option. The following aspects are specified at a high level in this document: - Physical layer structure; - Physical layer procedures; - UE capabilities; - Layer 2/3 protocol aspects; - Iub / Iur aspects; - Radio aspects; ETSI E

42、TSI TS 125 202 V13.0.0 (2016-01)83GPP TS 25.202 version 13.0.0 Release 135 Requirements - The 7.68Mcps TDD option shall provide significant enhancements in terms of user experience (throughput and delay) and/or capacity (at least to the extent shown in 1). - Full mobility shall be supported, i.e., m

43、obility should be supported for high-speed UE cases also, but optimisation should be for low-speed to medium-speed scenarios. - It is highly desirable for the 7.68Mcps TDD option to maintain commonality with the 3.84Mcps TDD option. New features shall therefore provide significant incremental gain f

44、or an acceptable complexity. - The UE and network complexity shall be minimised for a given level of system performance. - The impact on current releases in terms of both protocol and hardware perspectives shall be taken into account. 6 Physical layer structure 6.0 Services offered to higher layers

45、The 7.68Mcps TDD option supports an identical set of transport channels and indicators to the 3.84Mcps TDD option. 6.1 Frame structure The 7.68Mcps TDD option frame is of length 10ms and consists of 15 timeslots of duration 5120 * Tc, where Tcis the chip duration (Tc= 1 / 7.68 * 106= 130.2ns). Any t

46、imeslot in the frame can be either uplink or downlink. At least one timeslot in the frame is assigned to the uplink and at least one timeslot in the frame is assigned to the downlink. The frame structure is shown in Figure 6.1.1. Figure 6.1.1: The 7.68Mcps TDD option frame structure 6.2 Burst struct

47、ure The 7.68Mcps burst consists of two data field portions, a midamble portion containing a training sequence and a guard period as shown in Figure 6.2.1. Several bursts can be transmitted at the same time where each burst uses a different OVSF channelisation code, but the same scrambling code. Figu

48、re 6.2.1: 7.68Mcps TDD option burst structure Data field Data field Midamble guard period 5120 * Tctime frequency 10ms 5120 * Tc7.68Mcps ETSI ETSI TS 125 202 V13.0.0 (2016-01)93GPP TS 25.202 version 13.0.0 Release 13Three burst types are specified: burst types 1, 2 and 3. The maximum number of train

49、ing sequences supported in burst types 1 and 3 is either 4, 8 or 16 depending on cell configuration and either 4 or 8 for burst type 2 depending on cell configuration. The lengths of the fields within each burst are defined in Table 6.2.1. Table 6.2.1: Number of chips within fields of the 7.68Mcps burst Field Burst Type 1 Burst Type 2 Burst Type 3 Data field 1 1952 2208 1952 Midamble 1024 512 1024Data field 2 1952 2208 1760 Guard Period 192 192 384 On the downlink, a spreading factor of 32 is supported. Additionally for DPCH, PDSCH an