ETSI TS 125 213-2018 Universal Mobile Telecommunications System (UMTS) Spreading and modulation (FDD) (V15 0 0 3GPP TS 25 213 version 15 0 0 Release 15).pdf

1、 ETSI TS 125 213 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Spreading and modulation (FDD) (3GPP TS 25.213 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 213 V15.0.0 (2018-07)13GPP TS 25.213 version 15.0.0 Release 15Reference RTS/TSGR-0625213vf00 Keywor

2、ds UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded

3、from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or p

4、erceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to r

5、evision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Co

6、mmiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the writte

7、n authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered f

8、or the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 213 V15.0.0 (2018-07)23GPP TS 25.213 version 15.0.0 Release 15Intellectual

9、Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual P

10、roperty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR

11、searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks

12、 and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document do

13、es not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports usin

14、g their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In t

15、he present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliv

16、erables except when used in direct citation. ETSI ETSI TS 125 213 V15.0.0 (2018-07)33GPP TS 25.213 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Symbols, abbreviations and definitions 6g33.1 Symbo

17、ls 6g33.2 Abbreviations . 6g33.3 Definitions 7g34 Uplink spreading and modulation 8g34.1 Overview 8g34.2 Spreading 8g34.2.1 Dedicated physical channels . 8g34.2.1.1 DPCCH/DPDCH . 10g34.2.1.2 HS-DPCCH . 12g34.2.1.3 E-DPDCH/E-DPCCH . 13g34.2.1.4 S-DPCCH 20g34.2.1.4.1 S-DPCCH gain factor setting while

18、not transmitting rank-2 . 20g34.2.1.4.2 S-DPCCH gain factor setting while transmitting rank-2 . 21g34.2.1.5 S-E-DPCCH 21g34.2.1.6 S-E-DPDCH 21g34.2.1.7 DPCCH2 . 23g34.2.2 PRACH . 23g34.2.2.1 PRACH preamble part 23g34.2.2.2 PRACH message part 23g34.2.3 Void 24g34.2.4 Channel combining for UL CLTD and

19、 UL MIMO 24g34.3 Code generation and allocation 25g34.3.1 Channelisation codes 25g34.3.1.1 Code definition 25g34.3.1.2 Code allocation for dedicated physical channels . 26g34.3.1.2.1 Code allocation for DPCCH/ S-DPCCH/DPDCH/DPCCH2 26g34.3.1.2.2 Code allocation for HS-DPCCH when the UE is not configu

20、red in MIMO mode with four transmit antennas in any cell . 26g34.3.1.2.2A Code allocation for HS-DPCCH when the UE is configured in MIMO mode with four transmit antennas in at least one cell . 27g34.3.1.2.3 Code allocation for E-DPCCH/E-DPDCH 29g34.3.1.2.4 Code allocation for S-E-DPCCH/S-E-DPDCH . 2

21、9g34.3.1.3 Code allocation for PRACH message part 29g34.3.1.4 Void. 30g34.3.1.5 Void. 30g34.3.2 Scrambling codes 30g34.3.2.1 General 30g34.3.2.2 Long scrambling sequence 30g34.3.2.3 Short scrambling sequence 31g34.3.2.4 Dedicated physical channels scrambling code 32g34.3.2.5 PRACH message part scram

22、bling code. 32g34.3.2.6 Void. 33g34.3.2.7 Void. 33g34.3.3 PRACH preamble codes . 33g34.3.3.1 Preamble code construction 33g34.3.3.2 Preamble scrambling code 33g34.3.3.3 Preamble signature 33g3ETSI ETSI TS 125 213 V15.0.0 (2018-07)43GPP TS 25.213 version 15.0.0 Release 154.3.4 Void 34g34.4 Modulation

23、 . 34g34.4.1 Modulating chip rate . 34g34.4.2 Modulation 34g35 Downlink spreading and modulation . 35g35.1 Spreading 35g35.1.1 Modulation mapper . 35g35.1.1.1 QPSK 35g35.1.1.2 16QAM . 36g35.1.1.3 64QAM . 36g35.1.2 Channelisation 37g35.1.3 IQ combining 37g35.1.4 Scrambling 37g35.1.5 Channel combining

24、 . 37g35.2 Code generation and allocation 38g35.2.1 Channelisation codes 38g35.2.2 Scrambling code . 39g35.2.3 Synchronisation codes 40g35.2.3.1 Code generation 40g35.2.3.2 Code allocation of SSC . 41g35.3 Modulation . 44g35.3.1 Modulating chip rate . 44g35.3.2 Modulation 44g3Annex A (informative):

25、Generalised Hierarchical Golay Sequences . 45g3A.1 Alternative generation 45g3Annex B (informative): Uplink modulation for operation on adjacent frequencies 46g3Annex B1 (informative): Uplink modulation for UL CLTD 47g3Annex B2 (informative): Uplink modulation for operation on dual band frequencies

26、48g3Annex C (informative): Change history . 49g3History 51g3ETSI ETSI TS 125 213 V15.0.0 (2018-07)53GPP TS 25.213 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to

27、 continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit:

28、 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when edito

29、rial only changes have been incorporated in the document. ETSI ETSI TS 125 213 V15.0.0 (2018-07)63GPP TS 25.213 version 15.0.0 Release 151 Scope The present document describes spreading and modulation for UTRA Physical Layer FDD mode. 2 References The following documents contain provisions which, th

30、rough reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the

31、latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 25.201: “Physical layer - general description“. 2 3GPP TS 25.211:

32、 “Physical channels and mapping of transport channels onto physical channels (FDD).“ 3 3GPP TS 25.101: “UE Radio transmission and Reception (FDD)“. 4 3GPP TS 25.104: “UTRA (BS) FDD; Radio transmission and Reception“. 5 3GPP TS 25.308: “UTRA High Speed Downlink Packet Access (HSDPA); Overall descript

33、ion“. 6 3GPP TS 25.214: “Physical layer procedures (FDD)“. 7 3GPP TS 25.212: “Multiplexing and channel coding (FDD)“. 3 Symbols, abbreviations and definitions 3.1 Symbols For the purposes of the present document, the following symbols apply: Cch,SF,n: n:th channelisation code with spreading factor S

34、F Cpre,n,s: PRACH preamble code for n:th preamble scrambling code and signature s Csig,s: PRACH signature code for signature s Sdpch,n: n:th DPCCH/DPDCH uplink scrambling code Sr-pre,n: n:th PRACH preamble scrambling code Sr-msg,n: n:th PRACH message scrambling code Sdl,n: DL scrambling code Cpsc: P

35、SC code Cssc,n: n:th SSC code 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: 16QAM 16 Quadrature Amplitude Modulation 4PAM 4 Pulse Amplitude Modulation 64QAM 64 Quadrature Amplitude Modulation 8PAM 8 Pulse Amplitude Modulation AICH Acquisition Indicato

36、r Channel BCH Broadcast Channel CCPCH Common Control Physical Channel ETSI ETSI TS 125 213 V15.0.0 (2018-07)73GPP TS 25.213 version 15.0.0 Release 15CLTD Closed Loop Transmit Diversity CPICH Common Pilot Channel DCH Dedicated Channel DPCH Dedicated Physical Channel DPCCH Dedicated Physical Control C

37、hannel DPCCH2 Dedicated Physical Control Channel 2 DPDCH Dedicated Physical Data Channel E-AGCH E-DCH Absolute Grant Channel E-DPCCH E-DCH Dedicated Physical Control Channel E-DPDCH E-DCH Dedicated Physical Data Channel E-HICH E-DCH Hybrid ARQ Indicator Channel E-RGCH E-DCH Relative Grant Channel E-

38、ROCH E-DCH Rank and Offset Channel FDD Frequency Division Duplex F-DPCH Fractional Dedicated Physical Channel F-TPICH Fractional Transmitted Precoding Indicator Channel HS-DPCCH Dedicated Physical Control Channel (uplink) for HS-DSCH HS-DPCCH2 Secondary Dedicated Physical Control Channel (uplink) fo

39、r HS-DSCH, when Secondary_Cell_Enabled is greater than 3 HS-DSCH High Speed Downlink Shared Channel HS-PDSCH High Speed Physical Downlink Shared Channel HS-SCCH Shared Control Physical Channel for HS-DSCH MBSFN MBMS over a Single Frequency Network Mcps Mega Chip Per Second MICH MBMS Indication Chann

40、el OVSF Orthogonal Variable Spreading Factor (codes) TPI Transmitted Precoding Indicator PICH Page Indication Channel PRACH Physical Random Access Channel PSC Primary Synchronisation CodeRACH Random Access Channel SCH Synchronisation Channel S-DPCCH Secondary Dedicated Physical Control Channel S-E-D

41、PCCH Secondary Dedicated Physical Control Channel for E-DCH S-E-DPDCH Secondary Dedicated Physical Data Channel for E-DCH SSC Secondary Synchronisation Code SF Spreading Factor UE User Equipment3.3 Definitions Activated uplink frequency: For a specific UE, an uplink frequency is said to be activated

42、 if the UE is allowed to transmit on that frequency. The primary uplink frequency is always activated when configured while a secondary uplink frequency has to be activated by means of an HS-SCCH order in order to become activated. Similarly, for a specific UE, an uplink frequency is said to be deac

43、tivated if it is configured but disallowed by the NodeB to transmit on that frequency. Configured uplink frequency: For a specific UE, an uplink frequency is said to be configured if the UE has received all relevant information from higher layers in order to perform transmission on that frequency. P

44、rimary uplink frequency: If a single uplink frequency is configured for the UE, then it is the primary uplink frequency. In case more than one uplink frequency is configured for the UE, then the primary uplink frequency is the frequency on which the E-DCH corresponding to the serving E-DCH cell asso

45、ciated with the serving HS-DSCH cell is transmitted. The association between a pair of uplink and downlink frequencies is indicated by higher layers. Secondary uplink frequency: A secondary uplink frequency is a frequency on which an E-DCH corresponding to a serving E-DCH cell associated with a seco

46、ndary serving HS-DSCH cell is transmitted. The association between a pair of uplink and downlink frequencies is indicated by higher layers. ETSI ETSI TS 125 213 V15.0.0 (2018-07)83GPP TS 25.213 version 15.0.0 Release 154 Uplink spreading and modulation 4.1 Overview Spreading is applied to the physic

47、al channels. It consists of two operations. The first is the channelisation operation, which transforms every data symbol into a number of chips, thus increasing the bandwidth of the signal. The number of chips per data symbol is called the Spreading Factor (SF). The second operation is the scrambli

48、ng operation, where a scrambling code is applied to the spread signal. With the channelisation, data symbols on so-called I- and Q-branches are independently multiplied with an OVSF code. With the scrambling operation, the resultant signals on the I- and Q-branches are further multiplied by complex-

49、valued scrambling code, where I and Q denote real and imaginary parts, respectively. 4.2 Spreading 4.2.1 Dedicated physical channels The possible combinations of the maximum number of respective dedicated physical channels which may be configured simultaneously for a UE in addition to the DPCCH are specified in table 0. The actual UE capability may be lower than the values specified in table 0; the actual dedicated physical channel configuration is indicated by higher layer signalling. The actual number of configured DPDCHs, denoted Nmax-dpdch, is equal to th