ETSI TS 125 300-2017 Universal Mobile Telecommunications System (UMTS) Universal Terrestrial Radio Access Network (UTRAN) General description Stage 2 (V14 4 0 3GPP TS 25 300 versio.pdf

1、 ETSI TS 125 300 V14.2.0 (2017-04) Universal Mobile Telecommunications System (UMTS); Universal Terrestrial Radio Access Network (UTRAN); General description; Stage 2 (3GPP TS 25.300 version 14.2.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125 300 V14.2.0 (2017-04)13GPP TS 25.300 version 14.2

2、.0 Release 14Reference RTS/TSGR-0225300ve20 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Import

3、ant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written a

4、uthorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sho

5、uld be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the fo

6、llowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PD

7、F version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI

8、registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 300 V14.2.0 (2017-04)23GPP TS 25.300

9、 version 14.2.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3

10、14: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigat

11、ion, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specificati

12、on (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. T

13、he cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as

14、described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 300 V14.2.0 (2017-04)33GPP TS 25.300 version 14.2.0 Release 14Contents Intellectual Pro

15、perty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 7g34 Heterogeneous Networks Mobility Enhancements 7g35 Heterogeneous Networks Enhancements . 7g36 DCH

16、Enhancements (FDD only) . 8g36.1 DL overhead optimization 8g36.2 Enhanced rate matching and transport channel multiplexing . 8g36.3 DL frame early termination (DL FET) and UL DPCCH with DL FET ACK 8g36.3.1 DL FET Full mode (Mode 1) 9g36.3.2 DL FET Basic mode (Mode 0) . 9g36.4 Uplink DPDCH dynamic 10

17、ms transmission . 9g37 Access Control in Connected Mode (CELL_FACH, CELL_PCH and URA_PCH) . 9g38 Access control enhancements . 10g38.1 DSAC and PPAC update for the UE in CELL_DCH state 10g39 Enhanced Broadcast of System Information 10g39.1 Second system information broadcast channel . 10g39.2 Schedu

18、ling information overhead reduction . 12g39.3 MIB and Cell Value Tag range extension 12g310 RAN assisted WLAN interworking . 12g310.1 General principles. 12g310.2 Access network selection and traffic steering rules 13g311 Increased minimum number of carriers to monitor 13g312 Extended DRX in Idle mo

19、de 13g313 L2 and L3 Downlink enhancements for UMTS . 14g313.1 Retrievable configurations 14g313.2 URA_PCH with seamless transition. 14g313.3 Optimization from IDLE to CONNECTED state . 14g313.4 Blind HARQ retransmissions for HSDPA . 15g313.5 Enhanced state transition 15g313.6 Improved synchronized R

20、RC procedures . 15g314 Downlink TPC enhancements for UMTS 15g315 NAICS offloading (FDD only) . 15g316 ACDC in Idle Mode . 15g317 RRC optimization . 16g317.1 RRC measurement events for UPH reporting 16g317.2 Simultaneous Setup and Release of RABs and RBs 16g3ETSI ETSI TS 125 300 V14.2.0 (2017-04)43GP

21、P TS 25.300 version 14.2.0 Release 1418 HS-SCCH DRX in CELL_FACH state (FDD only) 16g319 Dual Cell E-DCH operation enhancements 16g320 QoE Measurement Collection for streaming services 16g3Annex A (informative): Change history . 18g3History 19g3ETSI ETSI TS 125 300 V14.2.0 (2017-04)53GPP TS 25.300 v

22、ersion 14.2.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the

23、present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under

24、 change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 300 V14.2.0 (2017-04)63GPP TS 25.300 version

25、14.2.0 Release 141 Scope The present document provides an overview and overall description of the UTRA radio interface functionalities from Release 12 onwards which are not covered by the Technical Specifications TS 25.308 2 or TS 25.319 3. 2 References The following documents contain provisions whi

26、ch, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference

27、, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 25.

28、308: “UTRA HSDPA: UTRAN Overall Description (Stage 2) “. 3 3GPP TS 25.319: “Enhanced Uplink: Overall description (Stage 2) “. 4 3GPP TS 24.008: “Mobile radio interface layer 3 specification, Core Network Protocols - Stage 3“. 5 3GPP TS 23.060: “General Packet Radio Service (GPRS); Service descriptio

29、n; Stage 2“. 6 3GPP TS 23.682: “Architecture enhancements to facilitate communications with packet data networks and applications“. 7 3GPP TR 25.704: “Study on enhanced broadcast of system information“. 8 3GPP TS 24.312: “Access Network Discovery and Selection Function (ANDSF) Management Object (MO)

30、“. 9 3GPP TS 25.304: “User Equipment (UE) procedures in idle mode and procedures for cell reselection in connected mode“. 10 3GPP TS 23.402: “Architecture enhancements for non-3GPP accesses“. 11 3GPP TS 25.133: “Requirements for support of radio resource management (FDD)“. 12 3GPP TS 25.331: “Radio

31、Resource Control (RRC)”. 13 3GPP TR 25.993: “Typical examples of Radio Access Bearers (RABs) and Radio Bearers (RBs) supported by Universal Terrestrial Radio Access (UTRA)“. 14 3GPP TS 37.320: “Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA); Radio m

32、easurement collection for Minimization of Drive Tests (MDT); Overall description; Stage 2“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present documen

33、t takes precedence over the definition of the same term, if any, in TR 21.905 1. ETSI ETSI TS 125 300 V14.2.0 (2017-04)73GPP TS 25.300 version 14.2.0 Release 14Power saving mode: Mode configured and controlled by NAS that allows the UE to reduce its power consumption, as defined in TS 24.008 4, TS 2

34、3.060 5, TS 23.682 6. 3.2 Symbols For the purposes of the present document, the following symbols apply: 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over t

35、he definition of the same abbreviation, if any, in TR 21.905 1. ACDC Application specific Congestion control for Data Communication ANDSF Access Network Discovery and Selection Function DPCCH2 Dedicated Physical Control Channel 2 NCL Neighbour Cell List OPI Offload Preference Indicator PSM Power Sav

36、ing Mode QoE Quality of Experience WLAN Wireless Local Area Network 4 Heterogeneous Networks Mobility Enhancements Neighbour Cell List (NCL) extension - The size of the inter-frequency neighbour cell list is extended for CELL_DCH, CELL_FACH, CELL_PCH, URA_PCH states and Idle mode, so that network co

37、uld configure more inter-frequency neighbour cells than 32 for UE to monitor and detect under massive small cell deployment scenario. Change of best cell on a configured secondary downlink frequency (event 2g) - Event 2g is an inter-frequency measurement event. It is applicable only to the secondary

38、 downlink frequency with configured HS-DSCH operation, and it can be configured on more than one secondary downlink frequency. Enhanced Serving Cell Change for Event 1C - The enhanced Serving Cell Change procedure could also be applied to Event 1C, which is defined in TS 25.308 2. 5 Heterogeneous Ne

39、tworks Enhancements Serving E-DCH cell decoupling - Serving E-DCH cell decoupling is introduced in order to improve the quality of reception of the uplink E-DCH control channels and the E-DCH SI in the presence of strong uplink/downlink imbalance. The UE is configured with different serving HS-DSCH

40、cell and serving E-DCH cell. Radio Links without DPCH/F-DPCH - The UE is configured with a subset of non-serving E-DCH radio links in the UEs E-DCH active set to operate in the absence of DPCH/F-DPCH. However, a UE is allowed to only receive either E-HICH or both E-HICH and E-RGCH from these non-ser

41、ving E-DCH cells to mitigate uplink interference to a cell that is unable to power control a UE in the presence of strong uplink/downlink imbalance. DPCCH2 transmission ETSI ETSI TS 125 300 V14.2.0 (2017-04)83GPP TS 25.300 version 14.2.0 Release 14- In order to improve the quality of reception of th

42、e HS-DPCCH in the presence of strong uplink/imbalance, a new secondary uplink pilot channel (DPCCH2) is introduced in the serving HS-DSCH cell as the reference for the HS-DPCCH channel power. 6 DCH Enhancements (FDD only) DCH enhancements aims at improving the link efficiency and UE battery performa

43、nce for voice calls compared to R99 DCH. DCH enhancements constitutes of the following sub-features: - DL overhead optimization - Enhanced rate matching and transport channel multiplexing - DL Frame Early Termination (DL FET) - Uplink DPCCH with DL FET ACK - Uplink DPDCH dynamic 10ms transmission DC

44、H enhancements supports two modes (Basic and Full). The mode choice controls how the DL Frame Early Termination sub-feature operates, as described in 6.3. All other sub-features are active in both modes. DCH enhancements is only applicable if the TTI of all DCH transport channels on both downlink an

45、d uplink is at least 20 ms. If a UE is configured with both CS and PS mapped to the DCH transport channel (in uplink or downlink or both), then DCH enhancements may be configured only when PS has UL:0 and DL:0kbps RAB configuration (3GPP TR 25.993 13). 6.1 DL overhead optimization This sub-feature i

46、ntroduces new DL DPCH slot format by removing the dedicated pilot bits from DL DPCCH and reusing them for DL DPDCH instead. The R99 downlink physical channel (DPCH) consists of 0.66ms slots that contain 2 groups of data (DPDCH) symbols and 3 groups of control (DPCCH) symbols. The size of the groups

47、is determined by the slot format. The control symbol groups are TPC - controlling uplink transmit power, TFCI - specifying the downlink packet type, and dedicated pilot - supporting channel estimation for DL power control and closed-loop transmit diversity. While the TFCI group may be empty in certa

48、in slot formats, the pilot and TPC are currently always non-empty. The dedicated pilot bits are used for estimation of DL SIR. With this sub-feature, new DL DPCH slot formats are introduced by removing the dedicated pilot bits and reusing the TPC bits instead for estimating the DL SIR. Corresponding

49、ly, the number of data symbols in a slot is increased leading to less control channel overhead on the downlink. DL closed-loop transmit diversity is not supported when this sub-feature is configured. 6.2 Enhanced rate matching and transport channel multiplexing The physical layer in R99 is designed to carry potentially a large variety of transport blocks with different sizes. The drawback for this design is the rate matching may not be efficient when some transport format combinations are not frequently used. For example, DCC