ETSI TS 125 300-2018 Universal Mobile Telecommunications System (UMTS) Universal Terrestrial Radio Access Network (UTRAN) General description Stage 2 (V15 1 0 3GPP TS 25 300 versio.pdf

1、 ETSI TS 125 300 V15.1.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Universal Terrestrial Radio Access Network (UTRAN); General description; Stage 2 (3GPP TS 25.300 version 15.1.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 300 V15.1.0 (2018-07)13GPP TS 25.300 version 15.1

2、.0 Release 15Reference RTS/TSGR-0625300vf10 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Import

3、ant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written a

4、uthorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sho

5、uld be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the fo

6、llowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PD

7、F version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3

8、GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 300 V15.1.0 (2018-07)23GP

9、P TS 25.300 version 15.1.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, an

10、d can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the

11、 ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trad

12、emarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Ment

13、ion of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may

14、 refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.o

15、rg/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “

16、must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 300 V15.1.0 (2018-07)33GPP TS 25.300 version 15.1.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 D

17、efinitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 7g34 Heterogeneous Networks Mobility Enhancements 7g35 Heterogeneous Networks Enhancements . 7g36 DCH Enhancements (FDD only) . 8g36.1 DL overhead optimization 8g36.2 Enhanced rate matching and transport

18、 channel multiplexing . 8g36.3 DL frame early termination (DL FET) and UL DPCCH with DL FET ACK 8g36.3.1 DL FET Full mode (Mode 1) 9g36.3.2 DL FET Basic mode (Mode 0) . 9g36.4 Uplink DPDCH dynamic 10ms transmission . 9g37 Access Control in Connected Mode (CELL_FACH, CELL_PCH and URA_PCH) . 9g38 Acce

19、ss control enhancements . 10g38.1 DSAC and PPAC update for the UE in CELL_DCH state 10g39 Enhanced Broadcast of System Information 10g39.1 Second system information broadcast channel . 10g39.2 Scheduling information overhead reduction . 11g39.3 MIB and Cell Value Tag range extension 12g310 RAN assis

20、ted WLAN interworking . 12g310.1 General principles. 12g310.2 Access network selection and traffic steering rules 12g311 Increased minimum number of carriers to monitor 13g312 Extended DRX in Idle mode 13g313 L2 and L3 Downlink enhancements for UMTS . 13g313.1 Retrievable configurations 13g313.2 URA

21、_PCH with seamless transition. 14g313.3 Optimization from IDLE to CONNECTED state . 14g313.4 Blind HARQ retransmissions for HSDPA . 14g313.5 Enhanced state transition 14g313.6 Improved synchronized RRC procedures . 14g314 Downlink TPC enhancements for UMTS 14g315 NAICS offloading (FDD only) . 15g316

22、 ACDC in Idle Mode . 15g317 RRC optimization . 15g317.1 RRC measurement events for UPH reporting 15g317.2 Simultaneous Setup and Release of RABs and RBs 15g318 HS-SCCH DRX in CELL_FACH state (FDD only) 15g3ETSI ETSI TS 125 300 V15.1.0 (2018-07)43GPP TS 25.300 version 15.1.0 Release 1519 Dual Cell E-

23、DCH operation enhancements 15g320 QoE Measurement Collection 15g321 DL Interference Mitigation (FDD only) . 16g322 Simplified HS-SCCH type 1 operation 16g3Annex A (informative): Change history . 17g3History 18g3ETSI ETSI TS 125 300 V15.1.0 (2018-07)53GPP TS 25.300 version 15.1.0 Release 15Foreword T

24、his Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-re

25、leased by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digi

26、t is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 300 V15.1.0 (2018-07)63GPP TS 25.300 version 15.1.0 Release 151 Scope The prese

27、nt document provides an overview and overall description of the UTRA radio interface functionalities from Release 12 onwards which are not covered by the Technical Specifications TS 25.308 2 or TS 25.319 3. 2 References The following documents contain provisions which, through reference in this text

28、, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In t

29、he case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 25.308: “UTRA HSDPA: UTRAN Overall De

30、scription (Stage 2) “. 3 3GPP TS 25.319: “Enhanced Uplink: Overall description (Stage 2) “. 4 3GPP TS 24.008: “Mobile radio interface layer 3 specification, Core Network Protocols - Stage 3“. 5 3GPP TS 23.060: “General Packet Radio Service (GPRS); Service description; Stage 2“. 6 3GPP TS 23.682: “Ar

31、chitecture enhancements to facilitate communications with packet data networks and applications“. 7 3GPP TR 25.704: “Study on enhanced broadcast of system information“. 8 3GPP TS 24.312: “Access Network Discovery and Selection Function (ANDSF) Management Object (MO)“. 9 3GPP TS 25.304: “User Equipme

32、nt (UE) procedures in idle mode and procedures for cell reselection in connected mode“. 10 3GPP TS 23.402: “Architecture enhancements for non-3GPP accesses“. 11 3GPP TS 25.133: “Requirements for support of radio resource management (FDD)“. 12 3GPP TS 25.331: “Radio Resource Control (RRC)”. 13 3GPP T

33、R 25.993: “Typical examples of Radio Access Bearers (RABs) and Radio Bearers (RBs) supported by Universal Terrestrial Radio Access (UTRA)“. 14 3GPP TS 37.320: “Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA); Radio measurement collection for Minimiza

34、tion of Drive Tests (MDT); Overall description; Stage 2“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the defini

35、tion of the same term, if any, in TR 21.905 1. Power saving mode: Mode configured and controlled by NAS that allows the UE to reduce its power consumption, as defined in TS 24.008 4, TS 23.060 5, TS 23.682 6. ETSI ETSI TS 125 300 V15.1.0 (2018-07)73GPP TS 25.300 version 15.1.0 Release 153.2 Symbols

36、For the purposes of the present document, the following symbols apply: 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbrevia

37、tion, if any, in TR 21.905 1. ACDC Application specific Congestion control for Data Communication ANDSF Access Network Discovery and Selection Function DPCCH2 Dedicated Physical Control Channel 2 NCL Neighbour Cell List OPI Offload Preference Indicator PSM Power Saving Mode QoE Quality of Experience

38、 WLAN Wireless Local Area Network 4 Heterogeneous Networks Mobility Enhancements Neighbour Cell List (NCL) extension - The size of the inter-frequency neighbour cell list is extended for CELL_DCH, CELL_FACH, CELL_PCH, URA_PCH states and Idle mode, so that network could configure more inter-frequency

39、 neighbour cells than 32 for UE to monitor and detect under massive small cell deployment scenario. Change of best cell on a configured secondary downlink frequency (event 2g) - Event 2g is an inter-frequency measurement event. It is applicable only to the secondary downlink frequency with configure

40、d HS-DSCH operation, and it can be configured on more than one secondary downlink frequency. Enhanced Serving Cell Change for Event 1C - The enhanced Serving Cell Change procedure could also be applied to Event 1C, which is defined in TS 25.308 2. 5 Heterogeneous Networks Enhancements Serving E-DCH

41、cell decoupling - Serving E-DCH cell decoupling is introduced in order to improve the quality of reception of the uplink E-DCH control channels and the E-DCH SI in the presence of strong uplink/downlink imbalance. The UE is configured with different serving HS-DSCH cell and serving E-DCH cell. Radio

42、 Links without DPCH/F-DPCH - The UE is configured with a subset of non-serving E-DCH radio links in the UEs E-DCH active set to operate in the absence of DPCH/F-DPCH. However, a UE is allowed to only receive either E-HICH or both E-HICH and E-RGCH from these non-serving E-DCH cells to mitigate uplin

43、k interference to a cell that is unable to power control a UE in the presence of strong uplink/downlink imbalance. DPCCH2 transmission - In order to improve the quality of reception of the HS-DPCCH in the presence of strong uplink/imbalance, a new secondary uplink pilot channel (DPCCH2) is introduce

44、d in the serving HS-DSCH cell as the reference for the HS-DPCCH channel power. ETSI ETSI TS 125 300 V15.1.0 (2018-07)83GPP TS 25.300 version 15.1.0 Release 156 DCH Enhancements (FDD only) DCH enhancements aims at improving the link efficiency and UE battery performance for voice calls compared to R9

45、9 DCH. DCH enhancements constitutes of the following sub-features: - DL overhead optimization - Enhanced rate matching and transport channel multiplexing - DL Frame Early Termination (DL FET) - Uplink DPCCH with DL FET ACK - Uplink DPDCH dynamic 10ms transmission DCH enhancements supports two modes

46、(Basic and Full). The mode choice controls how the DL Frame Early Termination sub-feature operates, as described in 6.3. All other sub-features are active in both modes. DCH enhancements is only applicable if the TTI of all DCH transport channels on both downlink and uplink is at least 20 ms. If a U

47、E is configured with both CS and PS mapped to the DCH transport channel (in uplink or downlink or both), then DCH enhancements may be configured only when PS has UL:0 and DL:0kbps RAB configuration (3GPP TR 25.993 13). 6.1 DL overhead optimization This sub-feature introduces new DL DPCH slot format

48、by removing the dedicated pilot bits from DL DPCCH and reusing them for DL DPDCH instead. The R99 downlink physical channel (DPCH) consists of 0.66ms slots that contain 2 groups of data (DPDCH) symbols and 3 groups of control (DPCCH) symbols. The size of the groups is determined by the slot format.

49、The control symbol groups are TPC - controlling uplink transmit power, TFCI - specifying the downlink packet type, and dedicated pilot - supporting channel estimation for DL power control and closed-loop transmit diversity. While the TFCI group may be empty in certain slot formats, the pilot and TPC are currently always non-empty. The dedicated pilot bits are used for estimation of DL SIR. With this sub-feature, new DL DPCH slot formats are introduced by removing the dedicated pilot bits and reusing the TPC bits instead for es