ETSI TS 125 305-2016 Universal Mobile Telecommunications System (UMTS) Stage 2 functional specification of User Equipment (UE) positioning in UTRAN (V13 0 0 3GPP TS 25 305 version .pdf

1、 ETSI TS 1Universal Mobile TelStage 2 functional sppos(3GPP TS 25.3TECHNICAL SPECIFICATION125 305 V13.0.0 (2016elecommunications System (specification of User Equipmeositioning in UTRAN .305 version 13.0.0 Release 1316-01) (UMTS); ment (UE) 13) ETSI ETSI TS 125 305 V13.0.0 (2016-01)13GPP TS 25.305 v

2、ersion 13.0.0 Release 13Reference RTS/TSGR-0225305vd00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803

3、/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior

4、 written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present do

5、cument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the fo

6、llowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PD

7、F version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI

8、registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 305 V13.0.0 (2016-01)23GPP TS 25.305

9、 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3

10、14: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigat

11、ion, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specificati

12、on (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. T

13、he cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as

14、described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 305 V13.0.0 (2016-01)33GPP TS 25.305 version 13.0.0 Release 13Contents Intellectual Pro

15、perty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 9g34 Main concepts and requirements 11g34.1 Assumptions . 12g34.2

16、UE Positioning Methods 12g34.3 Standard UE Positioning Methods . 13g34.3.1 Cell ID and Enhanced Cell ID Based Methods . 13g34.3.2 OTDOA-IPDL Method with network configurable idle periods 13g34.3.3 Network-assisted GNSS Methods . 14g34.3.4 U-TDOA Method 14g34.3.5 Barometric Pressure positioning . 14g

17、34.3.6 WLAN positioning . 14g34.3.7 Bluetooth positioning 14g34.3.8 TBS positioning 14g35 UTRAN UE Positioning Architecture 15g35.1 UE Positioning Operations . 15g35.1.1 Co-ordination, Measurement and Calculation Functions 16g35.2 Functional Description of UTRAN UE Positioning related elements 17g35

18、.2.1 Radio Network Controller (RNC) . 17g35.2.1.1 Serving RNC . 17g35.2.1.1.1 RNC Centric Mode 17g35.2.1.1.2 SAS Centric Mode . 17g35.2.1.2 Other RNC 18g35.2.1.2.1 Controlling RNC . 18g35.2.1.2.2 Drift RNC 19g35.2.2 Node B 19g35.2.3 Location measurement unit (LMU) 19g35.2.4 User Equipment (UE) . 20g

19、35.2.5 Stand-alone SMLC . 21g36 Signalling protocols and interfaces 21g36.1 LCS signalling between SRNC and MSC/SGSN . 21g36.2 SRNC signalling to a target UE 21g36.3 Controlling RNC signalling to a standalone LMU . 21g36.4 Controlling RNC signalling to an associated LMU 21g36.5 RNC-to-RNC signalling

20、 for UE Positioning support . 21g36.5a SAS to RNC signalling for PCAP 22g36.6 Interfaces 22g36.6.1 Iu Interface 22g36.6.2 Iur Interface 22g36.6.2.1 Signalling between SRNC and DRNC 22g36.6.2.2 Signalling between SRNC and CRNC 22g36.6.3 Iub Interface 23g3ETSI ETSI TS 125 305 V13.0.0 (2016-01)43GPP TS

21、 25.305 version 13.0.0 Release 136.6.3.1 Signalling between CRNC and associated LMU 23g36.6.4 Uu Interface 23g36.6.4.1 Signalling between SRNC and Target UE 23g36.6.4.1.1 Assistance Data Delivery to UE 25g36.6.4.1.2 Error Handling . 25g36.6.4.1.3 Broadcast of Assistance Data 25g36.6.4.1.4 Signalling

22、 Flow for Assistance Data Broadcast Using the Common UTRAN Broadcast Service . 25g36.6.4.1.5 UE Positioning Assistance Data Ciphering . 26g36.6.4.1.6 UE Positioning Assistance Data Ciphering Algorithm 26g36.6.4.2 Signalling between RNC and stand-alone LMU . 27g36.6.5 Iupc Interface 28g36.6.5.1 Signa

23、lling between RNC and SAS 28g36.6.5.1.1 PCAP Position Calculation 28g36.6.5.1.2 PCAP Information Exchange 29g36.6.5.1.3 PCAP for SAS based Positioning Method Selection . 30g37 General UTRAN UE Positioning procedures. 31g37.1 General procedures in UTRAN for UE Positioning . 31g37.2 Common procedures

24、supporting UE Positioning interaction between RNCs 32g37.2.1 Signalling in case of SRNS relocation 32g37.3 Exception procedures . 32g37.3.1 Procedures in the SRNC . 32g37.3.1.1 RNC Centric Mode . 32g37.3.1.2 SAS Centric Mode 33g37.3.2 Procedures in a LMU 34g37.3.3 Procedures in the target UE 34g37.3

25、.4 Procedures in the SAS 34g37.3.4.1 RNC Centric Mode . 34g37.3.4.2 SAS Centric Mode 34g37.4 Radio interface timing procedures 35g37.4.1 LMU Functions . 35g37.4.2 CRNC Functions. 35g37.4.3 LMU-CRNC Interactions . 35g38 Cell ID and Enhanced Cell ID based positioning methods 36g38.1 Cell ID determinat

26、ion . 39g38.1.1 UE Cell ID is not known . 39g38.1.2 UE Cell ID is known . 39g38.1.2.1 UE not in Soft handover 39g38.1.2.2 UE in Soft handover 39g38.2 Mapping the Cell ID to Geographic Co-ordinates or a Service Area . 40g38.3 Enhanced Cell ID Methods 40g38.3.1 Cell-ID with RTT . 41g38.3.2 Cell-ID wit

27、h Pathloss and Related Measurements 41g38.3.2.1 RF Pattern Matching (RFPM) . 41g38.3.3 Cell-ID with Angle of Arrival. 41g39 OTDOA positioning method 41g39.1 Use of Idle Periods . 43g39.2 Relative Time Difference (RTD) 43g39.3 Time of Day (ToD). 44g39.4 Node B Synchronisation . 44g39.5 OTDOA-IPDL and

28、 OTDOA Modes 44g39.5.1 Information to be transferred between UTRAN elements 44g39.6 OTDOA network positioning procedures . 46g39.6.1 RNC based selection of OTDOA 46g39.6.2 SAS based selection of OTDOA . 48g310 Network-assisted GPS positioning method 51g310.1 Timing calibration 52g310.2 Timing assist

29、ance . 52g310.3 GPS assistance data 52g3ETSI ETSI TS 125 305 V13.0.0 (2016-01)53GPP TS 25.305 version 13.0.0 Release 1310.4 UE search . 53g310.5 Position determination 53g310.5.1 Information to be transferred between UTRAN elements 53g310.5.1.1 Almanac data . 54g310.5.1.2 DGPS corrections 55g310.5.1

30、.3 Ionospheric corrections . 55g310.5.1.4 Ephemeris data and clock correction 55g310.5.1.5 Real Time integrity monitor function 55g310.5.1.6 GPS reference time . 56g310.5.1.7 UTC. 56g310.5.1.8 Reference Location . 56g310.5.1.9 Additional non-GPS related information 56g310.6 RNC based Network Assiste

31、d GPS positioning Procedure 57g310.7 SAS initiated Network Assisted GPS positioning Procedure . 58g311 Information storage 60g312 Uplink-Time Difference Of Arrival (U-TDOA) positioning method 60g312.1 General . 60g312.2 U-TDOA SAS architecture. 63g312.3 RNC based U-TDOA positioning for Cell_DCH and

32、Cell_FACH RRC states . 63g312.3.1 UE in CELL_DCH state . 63g312.3.2 UE in CELL_FACH state . 64g312.4 Optional SAS initiated U-TDOA positioning for Cell_DCH and Cell_FACH RRC states . 66g312.4.1 UE in CELL_DCH state . 66g312.4.1.1 Message Flow . 66g312.4.2. UE in CELL_FACH state . 68g312.4.2.1 Messag

33、e flow 68g313 Network-assisted GNSS positioning method . 70g313.1 Network-assisted GPS positioning method 71g313.2 Network-assisted Galileo positioning method 71g313.3 Network-assisted GLONASS positioning method . 71g313.4 Network-assisted Satellite Based Augmentation Systems (SBAS) 71g313.5 Network

34、-assisted Quasi-Zenith Satellite System (QZSS) 71g313.6 Network-assisted BeiDou Navigation Satellite System (BDS) positioning method 71g314 Barometric Pressure positioning methods 72g314.1 General . 72g314.2 Information to be transferred between UTRAN Elements . 72g314.2.1 Information that may be tr

35、ansferred from the UE to Network 72g314.2.1.1 Standalone mode . 72g314.2.1.2 UE-assisted mode 72g314.3 Location Information Transfer Procedure 73g314.3.1 SAS initiated Barometric Pressure positioning procedure 73g315 WLAN positioning method 74g315.1 Information to be transferred between UTRAN elemen

36、ts 75g315.2 SAS initiated WLAN positioning procedure 75g316 Bluetooth positioning methods . 77g316.1 Information to be transferred between UTRAN elements 78g316.2 SAS initiated Bluetooth positioning procedure 78g317 TBS positioning methods . 80g317.1 General . 80g317.2 Information to be transferred

37、between UTRAN Elements . 81g317.2.1 Information that may be transferred from the UE to SAS 81g317.2.1.1 Standalone mode . 81g317.2.1.2 UE-assisted mode 81g317.3 Location Information Transfer Procedure 81g317.3.1 SAS initiated TBS positioning procedure . 81g3Annex A (informative): Definitions and Ter

38、ms . 84g3ETSI ETSI TS 125 305 V13.0.0 (2016-01)63GPP TS 25.305 version 13.0.0 Release 13Annex B (informative): Reference Model of Functional Entities for UTRAN UE Positioning . 86g3B.1 Internal Client Group 88g3B.1.1 Internal UTRAN Location Client Function (U-LCF) . 88g3B.2 UTRAN System Handling gro

39、up . 88g3B.2.1 UTRAN Location System Control Function (U-LSCF) . 88g3B.2.2 UTRAN Location System Operations Function (U-LSOF) 89g3B.2.3 UTRAN Location Information Relay Function (U-LIRF) 89g3B.2.4 UTRAN Location System Control Function in SAS (U-LSCFS) . 89g3B.2.5 UTRAN Location System Assistance Da

40、ta Function (U-LSADF) . 90g3B.3 Positioning group . 90g3B.3.1 UTRAN Position Radio Co-ordination Function (U-PRCF) 90g3B.3.2 UTRAN Position Calculation Function (U-PCF) . 90g3B.3.3 UTRAN Position Signal Measurement Function (U-PSMF) 90g3B.3.4 UTRAN Position Radio Resource Management (U-PRRM) 91g3B.3

41、.5 UTRAN Position Related Communication Function (U-PRComF) . 91g3B.4 Assignment of LCS Functional Entities to UTRAN Elements . 91g3Annex C (informative): Location Services Categories 93g3Annex D (informative): Change history . 94g3History 96g3ETSI ETSI TS 125 305 V13.0.0 (2016-01)73GPP TS 25.305 ve

42、rsion 13.0.0 Release 13Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of

43、the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document u

44、nder change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 305 V13.0.0 (2016-01)83GPP TS 25.305 vers

45、ion 13.0.0 Release 131 Scope The present document specifies the stage 2 of the UE Positioning function of UTRAN, which provides the mechanisms to support the calculation of the geographical position of a UE. UE position knowledge can be used for example in support of Radio Resource Management functi

46、ons, location-based services for operators, subscribers and third party service providers. The purpose of this stage 2 specification is to define the UTRAN UE Positioning architecture, functional entities and operations to support positioning methods. This description is confined to the UTRAN Access

47、 Stratum. It does not define nor describe how the results of the UE position calculation can be utilised in the Core Network (e.g. LCS) or in UTRAN (e.g. RRM). UE Positioning may be considered as a network provided enabling technology consisting of standardised service capabilities, which enable the

48、 provision of location applications. The application(s) may be service provider specific. The description of the numerous and varied possible location applications which are enabled by this technology are outside the scope of the present document. However, clarifying examples of how the functionalit

49、y being described may be used to provide specific location services may be included. This stage 2 specification covers the UTRAN positioning methods, state descriptions, and message flows to support UE Positioning. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the la