1、 ETSI TS 125 308 V14.0.0 (2017-05) Universal Mobile Telecommunications System (UMTS); High Speed Downlink Packet Access (HSDPA); Overall description; Stage 2 (3GPP TS 25.308 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125 308 V14.0.0 (2017-05)13GPP TS 25.308 version 14.0.0 Releas
2、e 14Reference RTS/TSGR-0225308ve00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notic
3、e The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizat
4、ion of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aw
5、are that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following s
6、ervices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version
7、 shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registere
8、d for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI E
9、TSI TS 125 308 V14.0.0 (2017-05)23GPP TS 25.308 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and
10、 non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/).
11、 Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the presen
12、t document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being refer
13、ences to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not
14、“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 308 V14.0.0 (2017-05)33GPP TS 25.308 ver
15、sion 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 6g31 Scope 7g32 References 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g34 Background and Introduction . 9g35 Basic structure of HS-DSCH 9g35.1 Proto
16、col structure . 9g35.2 Basic physical structure 10g35.2.1 HS-DSCH Characteristics . 10g35.2.2 DL HS-DSCH Physical layer model . 11g35.2.2.1 FDD Downlink Physical layer Model . 11g35.2.2.2 TDD Downlink Physical layer model . 13g35.2.3 UL Physical layer model . 16g35.2.4 HS-DSCH physical-layer structu
17、re in the code domain 18g35.2.4.1 FDD. 18g35.2.4.2 TDD 18g35.3 Transport channel attributes . 18g36 MAC architecture . 19g36.1 HS-DSCH MAC architecture UE side 19g36.1.1 Overall architecture. 19g36.1.2 Details of MAC-d . 20g36.1.3 Details of MAC-c/sh . 22g36.1.4 Details of MAC-hs 23g36.1.5 Details o
18、f MAC-ehs 24g36.2 HS-DSCH MAC architecture UTRAN side 26g36.2.1 Overall architecture. 26g36.2.2 Details of MAC-c/sh . 29g36.2.3 Details of MAC-hs 29g36.2.4 Details of MAC-ehs 31g37 HARQ protocol 33g37.1 Signalling . 33g37.1.1 Uplink . 33g37.1.2 Downlink 34g37.1.2.1 Shared control channel signalling
19、. 34g37.1.2.2 In-band signalling on HS-DSCH. 34g37.2 Void 34g37.3 Void 34g37.4 Error handling 34g38 Signalling parameters . 35g38.1 Downlink signalling parameters . 35g38.1.1 UE identification . 35g38.1.2 Transport Block Sizes . 35g38.1.3 Channelisation codes (FDD only) . 35g38.1.4 HS-PDSCH configur
20、ation (TDD only) . 35g38.1.5 HARQ information . 35g38.1.6 Measurement feedback rate (FDD only) . 35g3ETSI ETSI TS 125 308 V14.0.0 (2017-05)43GPP TS 25.308 version 14.0.0 Release 148.1.7 HS-PDSCH power offset 35g38.1.8 Void 35g38.1.9 Void 36g38.1.10 HS-SCCH Cyclic Sequence Number (HCSN) (TDD only) 36
21、g38.2 Uplink signalling parameters 36g38.2.1 ACK/NACK . 36g38.2.2 Measurement report 36g39 Mobility procedures . 36g39.1 Serving HS-DSCH cell change 37g39.2 Serving HS-DSCH cell change mechanisms 38g39.3 Intra-Node B synchronised serving HS-DSCH cell change . 38g39.4 Inter-Node B synchronised servin
22、g HS-DSCH cell change during hard handover 39g39.5 Inter-Node B synchronised serving HS-DSCH cell change after active set update (radio link addition) 40g39.6 Serving HS-DSCH cell change with target cell pre-configuration . 42g310 Resource management 44g311 Discontinuous UL DPCCH transmission and di
23、scontinous reception of F-DPCH and HSPA DL channels in FDD . 45g311.1 Discontinuous uplink transmission . 45g311.1.1 Uplink DRX 47g311.2 Downlink DRX 47g311a Downlink Control Channel Discontinuous Reception in CELL_DCH state (1.28Mcps TDD only) . 49g312 HS-SCCH-less HS-DSCH transmission in FDD 49g31
24、2.1 HS-SCCH-less timing and operation 50g313 MIMO modelling and operation in HSDPA channel in FDD 51g313a MIMO modelling and operation in HSDPA channel in 1.28Mcps TDD . 52g313b MU-MIMO operation in HSDPA channel in 1.28Mcps TDD . 52g313c MIMO mode with four transmit antennas modelling and operation
25、 in HSDPA channel in FDD (FDD only) . 53g314 HS-DSCH reception in CELL_FACH state (FDD only) . 54g314.1 UE operation 54g314.2 Initial link adaptation 55g314.3 Measurement Occasion 55g314.4 Discontinuous reception . 56g314.4.1 HS-DSCH DRX operation in CELL_FACH state 56g314.4.2 HS-DSCH DRX operation
26、with second DRX cycle in CELL_FACH . 56g314.4.3 HS-SCCH DRX operation in CELL_FACH state 58g315 HS-DSCH reception in CELL_PCH and URA_PCH states (FDD only) . 59g315.1 UE operation 59g316 HS-DSCH reception in CELL_FACH state (1.28Mcps TDD only) 60g316.1 UE operation 61g316.2 Initial link adaptation 6
27、2g316.3 Link adaptation when H-RNTI is allocated 62g316.4 Discontinuous reception . 62g316.4.1 HS-DSCH DRX operation in CELL_FACH state 62g316.5 Measurement Occasion 63g317 HS-DSCH reception in CELL_PCH and URA_PCH states (1.28Mcps TDD only) 63g317.1 UE operation 64g318 Dual Cell HSDPA Operation (FD
28、D only) 65g318.1 Dual Cell HSDPA and MIMO . 66g318.2 Dual Band HSDPA Operation 66g319 HS-SCCH-less HS-DSCH transmission in 1.28Mcps TDD 67g319.1 HS-DSCH semi-persistent scheduling timing and operation . 67g3ETSI ETSI TS 125 308 V14.0.0 (2017-05)53GPP TS 25.308 version 14.0.0 Release 1419.2 Assignmen
29、t/reassignment of semi-persistent HS-PDSCH resources for HS-DSCH semi-persistent scheduling transmission . 67g320 Four Carrier HSDPA Operation (FDD only) . 68g321 Eight Carrier HSDPA Operation (FDD only) 69g322 Multiflow Operation (FDD only) . 70g323 Further Enhancements to CELL_FACH state (FDD only
30、) 73g323.1 NodeB triggered HS-DPCCH transmission . 73g324 DPCCH2 transmission (FDD only) 74g3Annex A: Void 75g3Annex B (informative): Change history . 76g3History 78g3ETSI ETSI TS 125 308 V14.0.0 (2017-05)63GPP TS 25.308 version 14.0.0 Release 14Foreword This Technical Specification has been produce
31、d by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change
32、 of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substanc
33、e, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 308 V14.0.0 (2017-05)73GPP TS 25.308 version 14.0.0 Release 141 Scope The present document is a technical specification of
34、the overall support of High Speed Downlink Packet Access in UTRA. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version n
35、umber, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that docu
36、ment in the same Release as the present document. 1 3GPP TR 25.855: “High Speed Downlink Packet Access (HSDPA): Overall UTRAN Description“. 2 3GPP TS 25.321: “Medium Access Control (MAC) protocol specification“. 3 3GPP TS 25.319: “FDD Enhanced Uplink: Overall description“. 4 3GPP TS 25.214: “Physica
37、l Layer Procedures (FDD)“. 5 3GPP TS 25.331 “Radio Resource Control (RRC)“. 6 3GPP TS 25.211 “Physical channels and mapping of transport channels onto physical channels (FDD)“. 7 3GPP TS 25.301 “Radio interface protocol architecture“. 8 3GPP TS25.304 “User Equipment (UE) procedures in idle mode and
38、procedures for cell reselection in connected mode“. 9 3GPP TS25.221 “Transport channels and physical channels (TDD)“. 10 3GPP TS 25.224: “Physical Layer Procedures (TDD)“. 11 3GPP TS 25.222: “Multplexing and Channel Coding (TDD)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of t
39、he present document, the following terms and definitions apply. Blind HARQ retransmissions for HSDPA (FDD): A HARQ operation where a UE in CELL_DCH state supports reception of MAC-hs/ehs PDU within 5 sub-frames from the reception of the previous MAC-hs/ehs PDU intended for the same HARQ process. Dat
40、a block: The data transmitted to one UE on HS-DSCH in one transport block (one or two transport blocks are transmitted per TTI in single and dual stream transmission respectively per HS-DSCH, three transport blocks are transmitted per TTI in three streams transmission per HS-DSCH and four transport
41、blocks are transmitted per TTI in four streams transmission per HS-DSCH). ETSI ETSI TS 125 308 V14.0.0 (2017-05)83GPP TS 25.308 version 14.0.0 Release 14Priority class: One flow of data within a HS-DSCH transport channel. One HS-DSCH can transport several priority classes (no more priority classes p
42、er TTI than the number of transport blocks). There is only one priority class per TTI (MAC-hs only) or several priority classes per TTI (MAC-ehs only). HARQ Process: Peer state machines capable of achieving error correction by retransmission. One process can be used only for one data block at a time
43、. HARQ Entity: Consists of all the HARQ processes of a UE for one HS-DSCH transport channel, controlling part or all the available soft buffer capacity. Serving HS-DSCH radio link: The radio link that the HS-PDSCH physical channel(s) allocated to the UE belongs to. Serving HS-DSCH cell: The cell ass
44、ociated with the UTRAN access point performing transmission and reception of the serving HS-DSCH radio link for a given UE. The serving HS-DSCH cell is always part of the current active set of the UE. Serving HS-DSCH Node B: A role a Node B may take with respect to a UE having one or several HS-PDSC
45、Hs allocated. The serving HS-DSCH Node B is the Node B controlling the serving HS-DSCH cell. HS-SCCH set: a set of HS-SCCH which is used for HS-PDSCH allocation. There is a maximum of four HS-SCCHs in a given HS-SCCH set. There can be multiple HS-SCCH sets in one cell. HS-SCCH sets are independent,
46、i.e. they can overlap or have no intersection. Serving HS-SCCH set: the HS-SCCH set being used by a given UE for HS-PDSCH allocations. MAC-d flow: a MAC-d flow is a flow of MAC-d PDUs which belong to logical channels which are MAC-d multiplexed. Common MAC Flow: a Common MAC Flow is a flow of MAC-c
47、PDU mapped to HS-DSCH configured for UEs in Cell_FACH. Paging MAC Flow: a Paging MAC Flow is a flow of MAC-c PDU mapped to HS-DSCH configured for UEs in Cell_PCH and URA_PCH. Multiflow: A mode of operation with two simultaneous HS-DSCH transport channels per carrier frequency, where the HS-DSCH tran
48、sport channels may belong to the same or different Node Bs. Assisting serving HS-DSCH Cell: In addition to the serving HS-DSCH cell, a cell in the same frequency, where the UE is configured to simultaneously monitor a HS-SCCH set and receive HS-DSCH if it is scheduled in that cell. Assisting seconda
49、ry serving HS-DSCH Cell: In addition to the serving HS-DSCH cell, a cell in the secondary downlink frequency, where the UE is configured to simultaneously monitor a HS-SCCH set and receive HS-DSCH if it is scheduled in that cell. Designated non-serving HS-DSCH cell: The non-serving HS-DSCH cell from which the UE estimates the F-DPCH quality for TPC derivation, when the UE is configured with DPCCH2 in the uplink or the Serving E-DCH cell decoupling is configured. The TPC is transmitted on UL DPCCH. Serving E-DCH cell decoupling (FDD only): An E-
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1