ETSI TS 125 319-2016 Universal Mobile Telecommunications System (UMTS) Enhanced uplink Overall description Stage 2 (V13 0 0 3GPP TS 25 319 version 13 0 0 Release 13)《通用移动通信系统(UMTS).pdf

1、 ETSI TS 1Universal Mobile TelEOv(3GPP TS 25.3TECHNICAL SPECIFICATION125 319 V13.0.0 (2016elecommunications System (nhanced uplink; erall description; Stage 2 .319 version 13.0.0 Release 1316-01) (UMTS); 13) ETSI ETSI TS 125 319 V13.0.0 (2016-01)13GPP TS 25.319 version 13.0.0 Release 13Reference RTS

2、/TSGR-0225319vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present doc

3、ument can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In c

4、ase of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the docu

5、ment may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi

6、.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified with

7、out the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Me

8、mbers. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 319 V13.0.0 (2016-01)23GPP TS 25.319 version 13.0.0 Release 13Intellectu

9、al Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (I

10、PRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has bee

11、n carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3r

12、d Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS

13、, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI

14、Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 319 V13.0.0 (2016-01)33GPP TS 25.319 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal

15、verbs terminology 2g3Foreword . 6g31 Scope 7g32 References 7g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.1.1 General 8g33.1.2 FDD 8g33.1.3 TDD 10g33.2 Abbreviations . 10g34 Background and introduction . 10g35 Requirements 11g36 Overall architecture of enhanced uplink DCH . 12g36.1 Pro

16、tocol architecture. 12g36.2 Transport channel attributes . 14g36.3 Basic physical structure 14g36.3.1 UL Physical layer model . 14g36.3.1.1 FDD. 14g36.3.1.2 TDD 15g36.3.2 DL Physical layer model . 18g36.3.2.1 FDD. 18g36.3.2.2 3.84 Mcps and 7.68 Mcps TDD 19g36.3.2.3 1.28 Mcps TDD . 20g37 MAC architec

17、ture . 23g37.1 General Principle 23g37.1.1 MAC multiplexing 23g37.1.2 Reordering entity 23g37.2 MAC architecture UE side 23g37.2.1 Overall architecture. 23g37.2.2 Details of MAC-d . 27g37.2.3 Details of MAC-c/sh . 27g37.2.4 Details of MAC-hs 28g37.2.5 Details of MAC-es/MAC-e . 28g37.2.6 Details of M

18、AC-is/MAC-i 29g37.3 MAC architecture UTRAN side 34g37.3.1 Overall architecture. 34g37.3.2 Details of MAC-d . 37g37.3.3 Details of MAC-c/sh . 38g37.3.4 Details of MAC-hs 39g37.3.5 Details of MAC-es 39g37.3.6 Details of MAC-e . 41g37.3.7 Details of MAC-is . 42g37.3.8 Details of MAC-i 47g38 HARQ protoc

19、ol 49g38.1 General principle 49g38.2 Error handling 51g38.3 Signalling . 51g38.3.1 Uplink . 51g3ETSI ETSI TS 125 319 V13.0.0 (2016-01)43GPP TS 25.319 version 13.0.0 Release 138.3.2 Downlink 52g39 Node B controlled scheduling 52g39.1 General principle 52g39.2 UE scheduling operation 54g39.2.1 Grants

20、from the Serving RLS . 54g39.2.1.1 FDD. 54g39.2.1.2 TDD 56g39.2.2 Grants from the Non-serving RL (FDD only) 57g39.2.3 Reception of Grants from both the Serving RLS and Non-serving RL(s) (FDD only) . 57g39.3 Signalling . 57g39.3.1 Uplink . 57g39.3.1.1 Scheduling information . 57g39.3.1.1.1 Content 57

21、g39.3.1.1.2 Triggers . 58g39.3.1.1.3 Transmission and Reliability scheme 59g39.3.1.2 Happy bit of E-DPCCH (FDD only) . 61g39.3.2 Downlink 61g310 Non-scheduled transmissions . 61g311 QoS control 62g311.1 General Principle 62g311.1.1 QoS configuration principles 63g311.2 TFC and E-TFC selection . 64g3

22、11.3 Setting of Power offset attributes of MAC-d flows 66g312 Signalling parameters . 66g312.1 Uplink signalling parameters 66g312.2 Downlink signalling parameters . 66g313 Mobility procedures . 70g313.1 Change of serving cell and/or serving RLS 70g314 Resource management 71g314.1 Scheduler control

23、from CRNC to Node B (FDD only) 71g314.2 Node B to CRNC reporting (FDD only) 71g314.3 Void 71g315 Timing Advance and Synchronisation (3.84/7.68 Mcps TDD only) . 72g316 E-DCH transmission in CELL_FACH state and Idle Mode (FDD only) . 72g317 E-DCH semi-persistent scheduling transmission in 1.28Mcps TDD

24、 . 74g317.1 Assignment/reassignment of semi-persistent E-PUCH resources for E-DCH semi-persistent scheduling transmission 74g318 E-DCH transmission in CELL_FACH state and Idle Mode (1.28Mcps TDD only) 74g319 Dual Cell E-DCH operation (FDD only) 75g319.1 Deactivation/activation of secondary RL using

25、HS-SCCH orders . 77g320 Multi-Carrier E-DCH operation (1.28 Mcps TDD only) . 79g321 MU-MIMO operation in HSUPA channel in 1.28Mcps TDD . 81g322 Uplink Transmit Diversity Operation (FDD only) . 81g322.1 Uplink open loop transmit diversity operation . 81g322.2 Uplink closed loop transmit diversity ope

26、ration . 82g323 Further Enhancements to CELL_FACH state (FDD only) 83g323.1 Concurrent deployment of 2ms and 10ms TTI in a cell . 83g323.2 Fallback to R99 PRACH 83g323.3 Reduction in timing of the initial access in the physical random access procedure . 84g323.4 Common E-RGCH based interference cont

27、rol . 84g323.5 TTI alignment . 84g323.6 Per HARQ process activation and de-activation 84g3ETSI ETSI TS 125 319 V13.0.0 (2016-01)53GPP TS 25.319 version 13.0.0 Release 1324 Uplink MIMO Operation (FDD only) 84g325 Enhanced TTI switching (FDD only) . 86g326 Heterogeneous Networks Enhancements (FDD only

28、) . 86g326.1 General . 86g326.2 Radio links without DPCH/F-DPCH 86g326.3 Serving E-DCH cell decoupling . 87g327 Implicit grant handling (FDD only) . 89g3Annex A (informative): Change history . 91g3History 93g3ETSI ETSI TS 125 319 V13.0.0 (2016-01)63GPP TS 25.319 version 13.0.0 Release 13Foreword Thi

29、s Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-rele

30、ased by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit

31、is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 319 V13.0.0 (2016-01)73GPP TS 25.319 version 13.0.0 Release 131 Scope The present

32、 document is a technical specification of the overall support of FDD, TDD Enhanced Uplink in UTRA. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publi

33、cation, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers t

34、o the latest version of that document in the same Release as the present document. 1 3GPP TR 25.896: “Feasibility Study for Enhanced Uplink for UTRA FDD“. 2 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 3 3GPP TS 25.214: “Physical layer procedures (FDD)“. 4 3GPP TS 25.321: “Medium Access Con

35、trol (MAC) protocol specification“. 5 3GPP TS 25.427: “UTRAN Iub/Iur interface user plane protocol for DCH data streams“ 6 3GPP TS 25.212: “Multiplexing and channel coding (FDD)“. 7 3GPP TS 25.215: “Physical layer - Measurements (FDD)“. 8 3GPP TS 25.306: “UE Radio Access capabilities“. 9 3GPP TR 25.

36、804: “Feasibility Study on Uplink Enhancements for UTRA TDD“ 10 3GPP TR 25.224: “Physical layer procedures (TDD)“ 11 3GPP TS 25.225: “Physical layer Measurements (TDD)“ 12 3GPP TR 25.826: “3.84 Mcps TDD Enhanced Uplink: Physical Layer Aspects“ 13 3GPP TS 25.221: “Physical Channels and Mapping of Tra

37、nsport Channels onto Physical Channeals (TDD)“ 14 3GPP TR 25.827: “1.28 Mcps TDD Enhanced Uplink: Physical Layer Aspects“ 15 3GPP TS 25.222: “Multiplexing and channel coding (TDD)“. 16 3GPP TS 25.308: “High Speed Downlink Packet Access (HSDPA); Overall description; Stage 2“. 17 3GPP TS 25.433: “UTRA

38、N Iub interface Node B Application Part (NBAP) signalling“. ETSI ETSI TS 125 319 V13.0.0 (2016-01)83GPP TS 25.319 version 13.0.0 Release 133 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 2 and the following a

39、pply: 3.1.1 General E-DCH: Enhanced DCH, a new dedicated and common (FDD and 1.28Mcps TDD only) transport channel type or enhancements to an existing dedicated and common (FDD and 1.28Mcps TDD only) transport channel type. HARQ profile: One HARQ profile consists of a power offset attribute and maxim

40、um number of transmissions. Power offset attribute (FDD): Represents the power offset between E-DPDCH(s) and reference E-DPDCH power level for a given E-TFC. This power offset attribute is set to achieve the required QoS in this MAC-d flow when carried alone in a MAC-e PDU and subsequently in the co

41、rresponding CCTrCh of E-DCH type. Details on the mapping on Beta factors can be found in 3. The reference E-DPDCH power offset is signaled to the UE for one (or several) reference E-TFC(s) (see details in subclause 11.1). Power offset attribute (TDD): The power offset attribute is set to achieve the

42、 required QoS in this MAC-d flow when carried alone in a MAC-e PDU and subsequently in the corresponding CCTrCh of E-DCH type. Primary Absolute Grant: Absolute Grant received with the primary E-RNTI. Note that the primary E-RNTI is the only E-RNTI for TDD. Serving E-DCH cell: Cell from which the UE

43、receives Absolute Grants from the Node-B scheduler. A UE has one Serving E-DCH cell. 3.1.2 FDD Active Process: HARQ process for which Scheduling Grants are applicable, i.e. scheduled data can be sent. Data Description Indicator (DDI): MAC-e header field used to identify the logical channel, MAC-d fl

44、ow and the size of the MAC-d PDUs concatenated into a MAC-es PDU. E-DCH: Enhanced DCH, a new dedicated and common (FDD only) transport channel type or enhancements to an existing dedicated and common (FDD only) transport channel type. E-DCH active set: The set of cells which carry the E-DCH for one

45、UE. In CELL_FACH state and Idle mode, the E-DCH active set contains the serving E-DCH cell only. Enhanced Uplink in CELL_FACH and Idle mode: combines the Rel99 random access power ramping phase with E-DCH transmission. The procedure can be started in idle mode and CELL_FACH state. E-DCH MAC-d flow:

46、MAC-es/MAC-is PDUs, carrying MAC-d and MAC-c (FDD only) data sharing the same traffic characteristics, and that can be multiplexed with MAC-es/MAC-is PDUs of same or other MAC-d flows on MAC-e/MAC-i. HARQ profile: One HARQ profile consists of a power offset attribute and maximum number of transmissi

47、ons. Implicit Grant handling: A scheduling scheme where a UE“s Scheduling Grant on the Secondary Serving E-DCH cell may be revoked by means of an Absolute Grant addressed to another UE. Inactive Process: HARQ process for which Scheduling Grants are not applicable, i.e. scheduled data cannot be sent.

48、 INACTIVE: Absolute Grant value in CELL_DCH that can be sent by the serving cells scheduler on the E-AGCH to deactivate a process or to switch the UE to its secondary E-RNTI. Absolute Grant value in CELL_FACH (FDD only) that can be sent by the serving cells scheduler on the E-AGCH to release a commo

49、n E-DCH resource. ETSI ETSI TS 125 319 V13.0.0 (2016-01)93GPP TS 25.319 version 13.0.0 Release 13Power offset attribute: Represents the power offset between E-DPDCH(s) and reference E-DPDCH power level for a given E-TFC. This power offset attribute is set to achieve the required QoS in this MAC-d flow when carried alone in a MAC-e PDU and subsequently in the corresponding CCTrCh of E-DCH type. Details on the mapping on Beta factors can be found in 3. The reference E-DPDCH power offset is signaled to the UE for one (or seve