ETSI TS 125 419-2018 Universal Mobile Telecommunications System (UMTS) UTRAN Iu-BC interface Service Area Broadcast Protocol (SABP) (V15 0 0 3GPP TS 25 419 version 15 0 0 Release 1.pdf

1、 ETSI TS 125 419 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); UTRAN Iu-BC interface: Service Area Broadcast Protocol (SABP) (3GPP TS 25.419 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 419 V15.0.0 (2018-07)13GPP TS 25.419 version 15.0.0 Release 15Refere

2、nce RTS/TSGR-0325419vf00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The pres

3、ent document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETS

4、I. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that t

5、he document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: h

6、ttps:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not

7、 be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare

8、trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 419 V15.0.0 (2018-07)23GPP TS 25.419 version

9、 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in E

10、TSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, n

11、o investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present

12、document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those tradem

13、arks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical

14、 specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.as

15、p. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not

16、“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 419 V15.0.0 (2018-07)33GPP TS 25.419 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 6g31 Scope 7g32 References 7g33 Definitions and abbr

17、eviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g34 General . 8g34.1 Procedure Specification Principles . 8g34.2 Forwards and Backwards Compatibility 9g34.3 Specification Notations 9g35 Services provided by SABP . 9g36 Services expected from the Transport layer . 9g37 Functions of SABP . 10g3

18、8 SABP Procedures . 10g38.1 Elementary Procedures . 10g38.2 Write-Replace . 10g38.2.1 General 10g38.2.2 Successful Operation 11g38.2.3 Unsuccessful Operation 12g38.2.4 Abnormal Conditions 13g38.3 Kill 13g38.3.1 General 13g38.3.2 Successful Operation 13g38.3.3 Unsuccessful Operation 14g38.3.4 Abnorma

19、l Conditions 14g38.4 Load Status Enquiry . 14g38.4.1 General 14g38.4.2 Successful Operation 14g38.4.3 Unsuccessful Operation 15g38.4.4 Abnormal Conditions 15g38.5 Message Status Query 15g38.5.1 General 15g38.5.2 Successful Operation 15g38.5.3 Unsuccessful Operation 16g38.5.4 Abnormal Conditions 16g3

20、8.6 Reset . 16g38.6.1 General 16g38.6.2 Successful Operation 17g38.6.3 Unsuccessful Operation 17g38.6.4 Abnormal Conditions 18g38.7 Restart Indication . 18g38.7.1 General 18g38.7.2 Successful Operation 18g38.7.3 Abnormal Conditions 18g38.8 Failure Indication . 18g38.8.1 General 18g38.8.2 Successful

21、Operation 18g38.8.3 Abnormal Conditions 19g38.9 Error Indication 19g3ETSI ETSI TS 125 419 V15.0.0 (2018-07)43GPP TS 25.419 version 15.0.0 Release 158.9.1 General 19g38.9.2 Successful Operation 19g38.9.3 Abnormal Conditions 19g39 Elements for SABP Communication 19g39.1 Message Functional Definition a

22、nd Content 19g39.1.1 General 19g39.1.2 Message Contents . 19g39.1.2.1 Presence 19g39.1.2.2 Criticality 20g39.1.2.3 Range 20g39.1.2.4 Assigned Criticality . 20g39.1.3 WRITE-REPLACE . 20g39.1.4 WRITE-REPLACE COMPLETE . 21g39.1.5 WRITE-REPLACE FAILURE . 21g39.1.6 KILL . 21g39.1.7 KILL COMPLETE . 21g39.

23、1.8 KILL FAILURE . 22g39.1.9 LOAD QUERY 22g39.1.10 LOAD QUERY COMPLETE. 22g39.1.11 LOAD QUERY FAILURE . 22g39.1.12 MESSAGE STATUS QUERY . 23g39.1.13 MESSAGE STATUS QUERY COMPLETE . 23g39.1.14 MESSAGE STATUS QUERY FAILURE . 23g39.1.15 RESET 23g39.1.16 RESET COMPLETE 23g39.1.17 RESET FAILURE 24g39.1.1

24、8 RESTART. 24g39.1.19 FAILURE . 24g39.1.20 ERROR INDICATION . 24g39.2 Information Element Definitions 25g39.2.0 General 25g39.2.1 MessageType 25g39.2.2 Broadcast Message Content 26g39.2.3 Serial Number . 26g39.2.4 Old Serial Number 26g39.2.5 New Serial Number 26g39.2.6 Service Areas List . 26g39.2.7

25、 Category 27g39.2.8 Repetition Period 27g39.2.9 Number of Broadcasts Requested . 27g39.2.10 Number of Broadcasts Completed List . 27g39.2.11 Service Area Identifier 28g39.2.12 Failure List 29g39.2.13 Radio Resource Loading List 29g39.2.14 Cause 29g39.2.15 Data Coding Scheme 31g39.2.16 Recovery Indic

26、ation 32g39.2.17 Criticality Diagnostics 32g39.2.18 Available Bandwidth 33g39.2.19 Message Identifier. 33g39.2.20 Message Structure . 34g39.2.21 Paging ETWS Indicator 34g39.2.22 Warning Type . 35g39.2.23 Warning Security Information 35g39.2.24 Broadcast Message Content Validity Indicator. 35g39.3 Me

27、ssage and Information Element Abstract Syntax (with ASN.1) 35g39.3.0 General 35g39.3.1 Usage of protocol extension mechanism for non-standard use . 35g39.3.2 Elementary Procedure Definitions 37g39.3.3 PDU Definitions . 40g39.3.4 Information Element Definitions 50g3ETSI ETSI TS 125 419 V15.0.0 (2018-

28、07)53GPP TS 25.419 version 15.0.0 Release 159.3.5 Common Definitions. 55g39.3.6 Constant Definitions . 56g39.3.7 Container Definitions 58g39.4 Message Transfer Syntax . 61g310 Handling of Unknown, Unforeseen or Erroneous Protocol Data . 61g310.1 General . 61g310.2 Transfer Syntax Error . 61g310.3 Ab

29、stract Syntax Error . 61g310.3.1 General 61g310.3.2 Criticality Information 62g310.3.3 Presence Information 62g310.3.4 Not comprehended IE/IE group 63g310.3.4.1 Procedure Code . 63g310.3.4.1A Type of Message . 63g310.3.4.2 IEs other than the Procedure Code and Type of Message . 63g310.3.5 Missing IE

30、 or IE group . 64g310.3.6 IEs or IE groups received in wrong order or with too many occurrences or erroneously present 65g310.4 Logical Error 66g310.5 Exceptions 66g3Annex A (informative): Guidelines for Usage of the Criticality Diagnostics IE . 67g3A.1 EXAMPLE MESSAGE Layout . 67g3A.2 Example on a

31、Received EXAMPLE MESSAGE . 68g3A.3 Content of Criticality Diagnostics 69g3A.3.1 Example 1 . 69g3A.3.2 Example 2 . 70g3A.3.3 Example 3 . 71g3A.3.4 Example 4 . 72g3A.3.5 Example 5 . 73g3A.4 ASN.1 of EXAMPLE MESSAGE . 74g3Annex B (informative): Change history . 77g3History 79g3ETSI ETSI TS 125 419 V15.

32、0.0 (2018-07)63GPP TS 25.419 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should

33、the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater in

34、dicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 419 V15.0.

35、0 (2018-07)73GPP TS 25.419 version 15.0.0 Release 151 Scope The present document specifies the Service Area Broadcast Protocol (SABP) between the Cell Broadcast Centre (CBC) and the Radio Network Controller (RNC). It fulfils the CBC - RNC communication requirements specified in TS 23.041 5 and is de

36、fined over the Iu-BC reference point. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific

37、. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as

38、the present document. 1 Void 2 Void 3 Void 4 3GPP TR 25.931: “UTRAN Functions: Examples on Signalling Procedures“. 5 3GPP TS 23.041: “Technical realization of Cell Broadcast Service (CBS)“. 6 3GPP TS 25.414: “UTRAN Iu Interface Data Transport and Transport Signalling“. 7 ITU-T Recommendation X.680 (

39、2002-07): “Information Technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation“. 8 ITU-T Recommendation X.681 (2002-07): “Information Technology - Abstract Syntax Notation One (ASN.1): Information object specification“. 9 ITU-T Recommendation X.691 (2002-07): “Information

40、Technology - ASN.1 encoding rules - Specification of Packed Encoding Rules (PER)“. 10 3GPP TR 25.921 (Version 7.0.0): “Guidelines and Principles for Protocol Description and Error Handling“. 11 3GPP TS 25.324: “Broadcast/Multicast Control BMC“. 12 3GPP TS 23.003: “Numbering, addressing and identific

41、ation“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Elementary Procedure: SABP consists of Elementary Procedures (EPs). An Elementary Procedure is a unit of interaction between the CN (CBC) and the RNC. These EP

42、s are defined separately and are intended to be used to build up complete sequences in a flexible manner. If the independence between some EPs is restricted, it is described under the relevant EP description. Unless otherwise stated by the restrictions, the EPs may be invoked independently of each o

43、ther as stand alone procedures, which can be active in parallel. Examples on using several SABP EPs together with each other and EPs from other interfaces can be found in reference TR 25.931 4. An EP consists of an initiating message and possibly a response message. Two kinds of EPs are used: ETSI E

44、TSI TS 125 419 V15.0.0 (2018-07)83GPP TS 25.419 version 15.0.0 Release 15- Class 1: Elementary Procedures with response (success or failure). - Class 2: Elementary Procedures without response. For Class 1 EPs, the types of responses can be as follows: Successful - A signalling message explicitly ind

45、icates that the elementary procedure successfully completed with the receipt of the response. Unsuccessful - A signalling message explicitly indicates that the EP failed. - On time supervision expiry (i.e. absence of expected response). Class 2 EPs are considered always successful. Message Reference

46、: This is defined as consisting of the following parameters: Message Identifier, Serial Number, and SAI (Service Area Identifier). 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: CBC Cell Broadcast Centre CBS Cell Broadcast Service CN Core Network EP El

47、ementary Procedure FP Frame Protocol PDU Protocol Data Unit RNC Radio Network Controller SA Service Area SABP Service Area Broadcast Protocol 4 General The protocol described in the present document is the protocol between CN (CBC) and RNC needed for the CBC Application. The CBC Application is descr

48、ibed in TS 23.041 5. 4.1 Procedure Specification Principles The principle for specifying the procedure logic is to specify the functional behaviour of the RNC exactly and completely. The CN functional behaviour is left unspecified. The following specification principles have been applied for the pro

49、cedure text in clause 8: - The procedure text discriminates between: 1) Functionality which “shall“ be executed: - The procedure text indicates that the receiving node “shall“ perform a certain function Y under a certain condition. If the receiving node supports procedure X but cannot perform functionality Y requested in the REQUEST message of a Class 1 EP, the receiving node shall respond with the message used to report unsuccessful outcome for this procedure, containing an appropriate cause value. ETSI ETSI TS 125 419 V15.0.0 (2018-07)93