ETSI TS 125 431-2016 Universal Mobile Telecommunications System (UMTS) UTRAN Iub interface Layer 1 (V13 0 0 3GPP TS 25 431 version 13 0 0 Release 13)《通用移动通信系统(UMTS) UTRAN(通用陆地无线接入网.pdf

1、 ETSI TS 1Universal Mobile TelUTRAN(3GPP TS 25.4TECHNICAL SPECIFICATION125 431 V13.0.0 (2016elecommunications System (A Iub interface Layer 1 .431 version 13.0.0 Release 1316-01) (UMTS); 13) ETSI ETSI TS 125 431 V13.0.0 (2016-01)13GPP TS 25.431 version 13.0.0 Release 13Reference RTS/TSGR-0325431vd00

2、 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be down

3、loaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existi

4、ng or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subje

5、ct to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Commi

6、teeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written a

7、uthorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and

8、 LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 431 V13.0.0 (2016-01)23GPP TS 25.431 version 13.0.0 Release 13Intellectual Property Right

9、s IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential,

10、or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by

11、ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Part

12、nership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI i

13、dentities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (V

14、erbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 431 V13.0.0 (2016-01)33GPP TS 25.431 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology

15、 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g34 Iub Layer 1 . 5g3Annex A (informative): Change history . 6g3History 7g3ETSI ETSI TS 125 431 V13.0.0 (2016-01)43GPP TS 25.431 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rd

16、Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release

17、date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. tech

18、nical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 431 V13.0.0 (2016-01)53GPP TS 25.431 version 13.0.0 Release 131 Scope The present document specifies the standards allowed to implement

19、 Layer 1 on the Iub interface. The specification of transmission delay requirements and O&M requirements is not in the scope of this document. In the following “Layer 1“ and “Physical Layer“ are assumed to be synonymous. 2 References The following documents contain provisions which, through referenc

20、e in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version appli

21、es. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 25.411: “UTRAN Iu interface Layer 1“. 2 ATM Forum AF-PHY-0130.00 (1999-10): “ATM on F

22、ractional E1/T1“. 3 Definitions and abbreviations For the purposes of the present document, the terms and definitions given in 3GPP TS 25.411 1 apply. 4 Iub Layer 1 The Iub Layer 1 shall comply with the requirements of chapter 4 in TS 25.411 1. In addition, for the Iub Layer 1, it shall be possible

23、to use n 64 kbit/s time slots within the scope of “ATM on Fractional E1/T1“ as specified in ATM Forum AF-PHY-0130.00 2, and to allow the co-existence of this interface with other interfaces on the same physical medium. ETSI ETSI TS 125 431 V13.0.0 (2016-01)63GPP TS 25.431 version 13.0.0 Release 13An

24、nex A (informative): Change history Date / TSG TSG Doc. CR Rev Subject/Comment New 12/2008 - - - Creation of Rel-8 version based on v7.0.0 8.0.0 12/2009 - - - Creation of Rel-9 version based on v8.0.0 9.0.0 SP-49 SP-100629 Clarification on the use of References (TS 21.801 CR#0030) 9.0.1 03/2011 Crea

25、tion of Rel-10 version based on v9.0.1 10.0.0 52 RP-110684 0003 - Correction of references 10.1.0 09/2012 Update to Rel-11 version (MCC) 11.0.0 09/2014 Update to Rel-12 version (MCC) 12.0.0 12/2015 Update to Rel-13 version (MCC) 13.0.0 ETSI ETSI TS 125 431 V13.0.0 (2016-01)73GPP TS 25.431 version 13.0.0 Release 13History Document history V13.0.0 January 2016 Publication