ETSI TS 126 131-2017 Universal Mobile Telecommunications System (UMTS) LTE Terminal acoustic characteristics for telephony Requirements (V14 1 0 3GPP TS 26 131 version 14 1 0 Relea.pdf

1、 ETSI TS 126 131 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Terminal acoustic characteristics for telephony; Requirements (3GPP TS 26.131 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 126 131 V14.0.0 (2017-04)13GPP TS 26.131 version 14.0.0 Release 14R

2、eference RTS/TSGS-0426131ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice

3、 The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizati

4、on of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be awa

5、re that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following se

6、rvices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version

7、shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered

8、 for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 126 131 V14.0.0 (2017-04)23GPP TS 26.131 version 1

9、4.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intel

10、lectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, inclu

11、ding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) ha

12、s been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross r

13、eference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described

14、in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 126 131 V14.0.0 (2017-04)33GPP TS 26.131 version 14.0.0 Release 14Contents Intellectual Property Righ

15、ts 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g3Introduction 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 9g34 Interfaces 10g35 Narrowband telephony transmission performance . 10g35.1 Applicability . 10g35.2 Overall l

16、oss/loudness ratings 11g35.2.1 General 11g35.2.2 Connections with handset UE . 11g35.2.3 Connections with desktop and vehicle-mounted hands-free UE. 11g35.2.4 Connections with hand-held hands-free UE . 12g35.2.5 Connections with headset UE . 12g35.3 Idle channel noise (handset and headset UE) . 12g3

17、5.3.1 Sending . 12g35.3.2 Receiving 12g35.4 Sensitivity/frequency characteristics 13g35.4.1 Handset and headset UE sending 13g35.4.2 Handset and headset UE receiving . 14g35.4.3 Desktop and vehicle-mounted hands-free UE sending . 15g35.4.4 Desktop and vehicle-mounted hands-free UE receiving . 16g35.

18、4.5 Hand-held hands-free UE sending 17g35.4.6 Hand-held hands-free UE receiving 18g35.5 Sidetone characteristics (handset and headset UE) 19g35.5.1 Sidetone loss . 19g35.5.2 Sidetone delay. 19g35.6 Stability loss . 20g35.7 Acoustic echo control . 20g35.7.1 General 20g35.7.2 Acoustic echo control in

19、desktop and vehicle-mounted hands-free UE . 20g35.7.3 Acoustic echo control in hand-held hands-free UE 21g35.7.4 Acoustic echo control in a handset UE . 21g35.7.5 Acoustic echo control in a headset UE . 21g35.8 Distortion 21g35.8.1 Sending distortion . 21g35.8.2 Receiving 22g35.9 Void 23g35.10 Infor

20、mation on other parameters (not normative) 23g35.11 Sending performance in the presence of ambient noise . 23g35.11.1 General 23g35.11.2 Connections with handset UE . 23g35.11.3 Connections with Handheld hands-free UE 23g35.12 Delay 24g35.12.0 UE delay definition . 24g35.12.1 Handset UE . 24g35.12.2

21、 Headset UE . 25g3ETSI ETSI TS 126 131 V14.0.0 (2017-04)43GPP TS 26.131 version 14.0.0 Release 145.12.2.1 Wired headset 25g35.12.2.2 Wireless headset 26g35.13 Echo control characteristics 26g35.13.1 Handset . 27g35.13.2 Headset . 27g35.13.3 Handheld hands-free . 27g35.13.4 Desktop and vehicle mounte

22、d hands-free . 27g36 Wideband telephony transmission performance 28g36.1 Applicability . 28g36.2 Overall loss/loudness ratings 28g36.2.1 General 28g36.2.2 Connections with handset UE . 28g36.2.3 Connections with desktop and vehicle-mounted hands-free UE. 28g36.2.4 Connections with hand-held hands-fr

23、ee UE . 29g36.2.5 Connections with headset UE . 29g36.3 Idle channel noise (handset and headset UE) . 30g36.3.1 Sending . 30g36.3.2 Receiving 30g36.4 Sensitivity/frequency characteristics 30g36.4.1 Handset and headset UE sending 30g36.4.2 Handset and headset UE receiving . 31g36.4.3 Desktop and vehi

24、cle-mounted hands-free UE sending . 31g36.4.4 Desktop and vehicle-mounted hands-free UE receiving . 32g36.4.5 Hand-held hands-free UE sending 34g36.4.6 Hand-held hands-free UE receiving 34g36.5 Sidetone characteristics (handset and headset UE) 36g36.5.1 Sidetone loss . 36g36.5.2 Sidetone delay. 36g3

25、6.6 Stability loss . 37g36.7 Acoustic echo control . 37g36.7.1 General 37g36.7.2 Acoustic echo control in desktop and vehicle-mounted hands-free UE . 37g36.7.3 Acoustic echo control in hand-held hands-free UE 37g36.7.4 Acoustic echo control in a handset UE . 38g36.7.5 Acoustic echo control in a head

26、set UE . 38g36.8 Distortion 38g36.8.1 Sending distortion . 38g36.8.2 Receiving 39g36.9 Void 40g36.10 Sending performance in the presence of ambient noise . 40g36.10.1 General 40g36.10.2 Connections with handset UE . 40g36.10.3 Connections with Handheld hands-free UE 40g36.11 Delay 41g36.11.0 UE dela

27、y definition . 41g36.11.1 Handset UE . 41g36.11.2 Headset UE . 42g36.11.2.1 Wired headset 42g36.11.2.2 Wireless headset 43g36.12 Echo control characteristics 43g36.12.1 Handset . 44g36.12.2 Headset . 44g36.12.3 Handheld hands-free . 44g36.12.4 Desktop and vehicle mounted hands-free . 44g37 Super-wid

28、eband telephony transmission performance . 45g37.1 Applicability . 45g37.2 Overall loss/loudness ratings 45g37.2.1 General 45g37.2.2 Connections with handset UE . 45g37.2.3 Connections with desktop and vehicle-mounted hands-free UE. 45g3ETSI ETSI TS 126 131 V14.0.0 (2017-04)53GPP TS 26.131 version 1

29、4.0.0 Release 147.2.4 Connections with hand-held hands-free UE . 46g37.2.5 Connections with headset UE . 46g37.3 Idle channel noise (handset and headset UE) . 47g37.3.1 Sending . 47g37.3.2 Receiving 47g37.4 Sensitivity/frequency characteristics 47g37.4.0 General 47g37.4.1 Handset and headset UE send

30、ing 47g37.4.2 Handset and headset UE receiving . 48g37.4.2.1 Handset UE receiving . 48g37.4.2.2 Headset UE receiving 50g37.4.3 Desktop and vehicle-mounted hands-free UE sending . 50g37.4.4 Desktop and vehicle-mounted hands-free UE receiving . 51g37.4.5 Hand-held hands-free UE sending 52g37.4.6 Hand-

31、held hands-free UE receiving 53g37.5 Sidetone characteristics (handset and headset UE) 53g37.5.1 Sidetone loss . 53g37.5.2 Sidetone delay. 54g37.6 Stability loss . 54g37.7 Acoustic echo control . 54g37.7.1 General 54g37.7.2 Acoustic echo control in desktop and vehicle-mounted hands-free UE . 54g37.7

32、.3 Acoustic echo control in hand-held hands-free UE 55g37.7.4 Acoustic echo control in a handset UE . 55g37.7.5 Acoustic echo control in a headset UE . 55g37.8 Distortion 56g37.8.1 Sending distortion . 56g37.8.2 Receiving 56g37.9 Void 57g37.10 Sending performance in the presence of ambient noise . 5

33、7g37.10.1 General 57g37.10.2 Connections with handset UE . 57g37.11 Delay 57g37.11.0 UE delay definition . 57g37.11.1 Handset UE . 58g37.11.2 Headset UE . 59g37.11.2.1 Wired headset 59g37.11.2.2 Wireless headset 60g37.12 Echo control characteristics 60g37.12.1 Handset . 61g37.12.2 Headset . 61g37.12

34、.3 Handheld hands-free . 62g37.12.4 Desktop and vehicle mounted hands-free . 62g38 Fullband telephony transmission performance . 62g38.1 Applicability . 62g38.2 Overall loss/loudness ratings 62g38.2.1 General 62g38.2.2 Connections with handset UE . 62g38.2.3 Connections with desktop and vehicle-moun

35、ted hands-free UE. 62g38.2.4 Connections with hand-held hands-free UE . 62g38.2.5 Connections with headset UE . 62g38.3 Idle channel noise (handset and headset UE) . 63g38.3.1 Sending . 63g38.3.2 Receiving 63g38.4 Sensitivity/frequency characteristics 63g37.4.0 General 63g38.4.1 Handset and headset

36、UE sending 63g38.4.2 Handset and headset UE receiving . 63g38.4.2.1 Handset UE receiving . 63g38.4.2.2 Headset UE receiving 63g38.4.3 Desktop and vehicle-mounted hands-free UE sending . 63g3ETSI ETSI TS 126 131 V14.0.0 (2017-04)63GPP TS 26.131 version 14.0.0 Release 148.4.4 Desktop and vehicle-mount

37、ed hands-free UE receiving . 63g38.4.5 Hand-held hands-free UE sending 64g38.4.6 Hand-held hands-free UE receiving 64g38.5 Sidetone characteristics (handset and headset UE) 64g38.5.1 Sidetone loss . 64g38.5.2 Sidetone delay. 64g38.6 Stability loss . 64g38.7 Acoustic echo control . 64g38.7.1 General

38、64g38.7.2 Acoustic echo control in desktop and vehicle-mounted hands-free UE . 64g38.7.3 Acoustic echo control in hand-held hands-free UE 64g38.7.4 Acoustic echo control in a handset UE . 64g38.7.5 Acoustic echo control in a headset UE . 65g38.8 Distortion 65g38.8.1 Sending distortion . 65g38.8.2 Re

39、ceiving 65g38.9 Void 65g38.10 Sending performance in the presence of ambient noise . 65g38.10.1 General 65g38.10.2 Connections with handset UE . 65g38.11 Delay 65g38.11.0 UE delay definition . 65g38.11.1 Handset UE . 66g38.11.2 Headset UE . 67g38.11.2.1 Wired headset 67g38.11.2.2 Wireless headset 67

40、g38.12 Echo control characteristics 67g38.12.1 Handset . 68g38.12.2 Headset . 68g38.12.3 Handheld hands-free . 68g38.12.4 Desktop and vehicle mounted hands-free . 68g3Annex A (informative): Change history . 69g3History 71g3ETSI ETSI TS 126 131 V14.0.0 (2017-04)73GPP TS 26.131 version 14.0.0 Release

41、14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it w

42、ill be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the

43、 second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document specifies minimum performance requirements for the

44、 acoustic characteristics of 3G and LTE terminals when used to provide narrowband, wideband, super-wideband or fullband telephony. The objective for narrowband services is to reach a quality as close as possible to ITU-T standards for PSTN circuits. However, due to technical and economic factors, th

45、ere cannot be full compliance with the general characteristics of international telephone connections and circuits recommended by the ITU-T. The performance requirements are specified in the main body of the text; the test methods and considerations are described in TS 26.132. ETSI ETSI TS 126 131 V

46、14.0.0 (2017-04)83GPP TS 26.131 version 14.0.0 Release 141 Scope The present document is applicable to any terminal capable of supporting narrowband, wideband, super-wideband or fullband telephony, either as a stand-alone service or as the telephony component of a multimedia service. The present doc

47、ument specifies minimum performance requirements for the acoustic characteristics of 3G and LTE terminals when used to provide narrowband, wideband, super-wideband or fullband telephony. The set of minimum performance requirements enables a guaranteed level of speech quality while taking possible ph

48、ysical limits of the terminal design into account. Some performance objectives are also defined, if such design limits can be overcome. Care must be taken in applying performance objectives in isolation, not to degrade overall end-user speech quality. 2 References The following documents contain pro

49、visions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 26.132: “Speech and video te