ETSI TS 126 406-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE General audio codec audio processing functions Enha.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelGeneral audio codEnhanced aaCon(3GPP TS 26.4floppy3TECHNICAL SPECIFICATION126 406 V13.0.0 (2016communications system (Phaelecommunications System (LTE; odec audio processing functiaacPlus general audio codec;o formance testing .406 version 13.0.0

2、Release 1316-01) hase 2+); (UMTS); ctions; c; 13) ETSI ETSI TS 126 406 V13.0.0 (2016-01)13GPP TS 26.406 version 13.0.0 Release 13Reference RTS/TSGS-0426406vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Sir

3、et N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. T

4、he content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portab

5、le Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.e

6、tsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanic

7、al, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications St

8、andards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo

9、are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 126 406 V13.0.0 (2016-01)23GPP TS 26.406 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these

10、 essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest u

11、pdates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web s

12、erver) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS ident

13、ities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall

14、 not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct

15、citation. ETSI ETSI TS 126 406 V13.0.0 (2016-01)33GPP TS 26.406 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 Normative references . 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations .

16、6g34 General . 6g35 Decoder conformance testing . 6g35.1 AAC-LC, SBR and Parametric Stereo conformance testing 6g35.2 void . 6g36 Encoder conformance . 6g36.1 Floating point encoder 6g36.2 Fixed point encoder 7g36.2.1 Bit-exact Behaviour 7g36.2.2 Objective criteria 7g36.2.2.1 AAC encoder conformance

17、 . 7g36.2.2.2 SBR encoder conformance 8g36.2.2.3 PS encoder conformance . 9g36.2.3 Subjective criteria . 9g3Annex A: Void 10g3Annex B (normative): Test vectors for fixed-point encoder conformance 11g3Annex C (informative): Change history . 12g3History 13g3ETSI ETSI TS 126 406 V13.0.0 (2016-01)43GPP

18、TS 26.406 version 13.0.0 Release 13Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the

19、contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approve

20、d document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 126 406 V13.0.0 (2016-01)53GPP TS

21、 26.406 version 13.0.0 Release 131 Scope The present document specifies the digital test sequences and conformance criteria for the Enhanced aacPlus audio codec. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of the pres

22、ent document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document

23、 (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 26.401: “General audio codec audio processing functions; Enhanced aacPlus general audio codec; General description“. 2 3GPP TS 26.403:

24、 “General audio codec audio processing functions; Enhanced aacPlus general audio codec; Encoder specification; Advanced Audio Coding (AAC) part“. 3 3GPP TS 26.404: “General audio codec audio processing functions; Enhanced aacPlus general audio codec; Encoder specification; Spectral Band Replication

25、(SBR) part“. 4 3GPP TS 26.405: “General audio codec audio processing functions; Enhanced aacPlus general audio codec; Encoder specification; Parametric stereo part“. 5 3GPP TS 26.410: “General audio codec audio processing functions; Enhanced aacPlus general audio codec; Floating-point ANSI-C code“.

26、6 3GPP TS 26.411: “General audio codec audio processing functions; Enhanced aacPlus general audio codec; Fixed-point ANSI-C code“. 7 ISO/IEC 14496-4:2004: “Information technology - Coding of audio-visual objects - Part 4: Conformance testing“. 8 ISO/IEC 14496-4:2004/Amd.8:2005: “Information technolo

27、gy - Coding of audio-visual objects - Part 4: Conformance testing Amendment 8: High Efficiency Advanced Audio Coding, audio BIFS, and structured audio conformance“. 9 ITU-R Recommendation BS.1387-1: “Method for objective measurements of PErceived Audio Quality (PEAQ)“. 10 ISO/IEC 14496-4:2004/Amd.11

28、:2006 “Information technology - Coding of audio-visual objects - Part 4: Conformance testing - Amendment 11: Parametric Stereo conformance“. 11 ISO/IEC 14496-4:2004/Amd.11:2006/Cor.2:2007 “Information technology - Coding of audio-visual objects - Part 4: Conformance testing - Amendment 11: Parametri

29、c Stereo conformance Technical Corrigendum 2“. ETSI ETSI TS 126 406 V13.0.0 (2016-01)63GPP TS 26.406 version 13.0.0 Release 133 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TS 26.401 1, 3GPP TS 26.403 2, 3GPP TS 26.40

30、4 3, 3GPP TS 26.405 4, 3GPP TS 26.410 5and 3GPP TS 26.411 6 apply. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AAC-LC Advanced Audio Coding-Low Complexity audio object type ODG Objective Difference Grade PEAQ Perceptual Evaluation of Audio Quality S

31、BR Spectral Band Replication 4 General Conformance testing is an important tool to verify that implementations of Enhanced aacPlus match the relevant specifications. It is also helpful in verifying the proper use of the source code provided in 3GPP TS 26.410 5 and 3GPP TS 26.411 6. Conformance testi

32、ng focuses on the core algorithm, therefore no criteria are defined for error concealment, downsampling and file I/O. Clause 5 describes the proposed method of conformance testing for the decoder. Clause 6 discusses encoder conformance. 5 Decoder conformance testing Decoder conformance for both fixe

33、d-point and floating-point implementations shall be tested in accordance with clause 5.1. Conformance shall be verified by either bit-exact behaviour to the reference output or by meeting the objective criteria defined below. Bit-exact behaviour should be preferred for fixed-point implementations wh

34、ere it can be achieved without undue penalty on computational complexity. 5.1 AAC-LC, SBR and Parametric Stereo conformance testing Conformance testing for AAC-LC, SBR and Parametric Stereo shall be performed according to the relevant clauses in ISO/IEC 14496-4 7, 8, 10, 11. 3GPP conformance shall n

35、ot be claimed for implementations achieving an accuracy level of K L/R unmapping. The comparison however takes place in the log-domain. For higher energies only low deviations are allowed, while lower energies are permitted to deviate more: Differences of up to 3dB are allowed for all energies, diff

36、erences of up to 6dB are allowed for energies up to 42 dB below a full scale sine, differences of up to 9 dB are allowed for energies up to 60 dB below a full scale sine. The test of the transient detector is performed by comparing the bitstream element sbr_grid() from both encoders. The RMS of the

37、difference between the transient position vector of the encoder under test and the reference encoder shall not be greater than 0.2. The test of the missing harmonics detector is carried out by comparing the bitstream elements sbr_sinusoidal_coding() from both encoders. The vector that is constructed

38、 by subtracting the missing harmonics vectors from both bitstreams and concatenating the result over all frames shall not have an RMS greater than 0.2. The test of the whitening level detector is performed by comparing the bitstream element sbr_invf() from both encoders. The vector that is construct

39、ed by subtracting the whitening level vectors of the encoder under test and the reference encoder shall not have an RMS greater than 0.2. ETSI ETSI TS 126 406 V13.0.0 (2016-01)93GPP TS 26.406 version 13.0.0 Release 13 The test for the noise floor estimator module is identical to the test for the env

40、elope energy conformance test, except that the actual noise floor energies are compared instead of the envelope energies. The maximum permissible noise floor energy difference for a given deviation between reference encoder and encoder under test are as follows: Differences of up to 6 dB are allowed

41、 for all energies, differences of up to 9 dB are allowed for energies up to 42 dB below a full scale sine, differences of up to 12 dB are allowed for energies up to 60 dB below a full scale sine. 6.2.2.3 PS encoder conformance All comparisons shall be limited to frames and bands in the bitstream tha

42、t contain an energy greater than -87 dB below a full-scale sine. Prior to the actual conformance test, the stereo parameters from both encoders are mapped to the highest available stereo frequency resolution. the signal that is constructed from the differences between all IID values signaled by the

43、encoder under test and the reference encoder shall have a maximum absolute difference of 2 and the RMS must not exceed 0.25 the signal that is constructed from the differences between all ICC values signaled by the encoder under test and the reference encoder shall have a maximum absolute difference

44、 of 2 and the RMS must not exceed 0.25 6.2.3 Subjective criteria Subjective tests shall cover the encoder configurations tested during the characterization phase. The requirement for passing the subjective tests is that the encoder under test does not perform worse in a statistically significant sen

45、se in any test case when compared to the fixed-point reference encoder. ETSI ETSI TS 126 406 V13.0.0 (2016-01)103GPP TS 26.406 version 13.0.0 Release 13Annex A: Void Table 1: Void ETSI ETSI TS 126 406 V13.0.0 (2016-01)113GPP TS 26.406 version 13.0.0 Release 13Annex B (normative): Test vectors for fi

46、xed-point encoder conformance Table 2: Testvectors specifically relevant for the objective testing of the AAC tool # Test vector file name 1 ct_castagnettes.wav 2 ct_glockenspiel.wav 3 ct_test_1_48.wav 4 ct_test_2_48.wav 5 ct_test_3_48.wav 6 cymbal.wav 7 gong.wav 8 guitar_1.wav 9 guitar_2.wav 10 gui

47、tar_cymbals.wav 11 handcuff.wav 12 hihat.wav 13 laugh.wav 14 shaker.wav 15 speech_female.wav 16 speech_male_german.wav 17 speech_male_portuguese.wav 18 triangle.wav 19 wooden_toys_1.wav 20 wooden_toys_2.wav Table 3: Testvectors specifically relevant for the objective testing of the SBR tool # Test v

48、ector file name SBR module 21 noise_fade.wav Envelope 12 hihat.wav Transients1 ct_castagnettes.wav Transients 22 sines.wav Sines21 noise_fade.wav Noise 23 invf.wav WhiteningTable 4: Testvectors specifically relevant for the objective testing of the PS tool # Test vector file name PS parameter 3 ct_t

49、est_1_48.wav IID 2 ct_glockenspiel.wav IID 3 ct_test_1_48.wav ICC 18 triangle.wav ICCETSI ETSI TS 126 406 V13.0.0 (2016-01)123GPP TS 26.406 version 13.0.0 Release 13Annex C (informative): Change history Change history Date TSG SA# TSG Doc. CR Rev Subject/Comment Old New 2005-06 28 SP-050242 Approved at TSG SA#28 2.0.0 6.0.0 2005-12 30 SP-050786 0001 2 Correction to Enhanced aacPlus Encoder conformance 6.0.0 6.1.0 2006-03 31 SP-060013 0002 Correction to Enhanced aacPlus Decoder conformance: replacement of one te