ETSI TS 126 449-2018 Universal Mobile Telecommunications System (UMTS) LTE Codec for Enhanced Voice Services (EVS) Comfort Noise Generation (CNG) aspects (V15 0 0 3GPP TS 26 449 ve.pdf

1、 ETSI TS 126 449 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); LTE; Codec for Enhanced Voice Services (EVS); Comfort Noise Generation (CNG) aspects (3GPP TS 26.449 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 126 449 V15.0.0 (2018-07)13GPP TS 26.449 version

2、15.0.0 Release 15Reference RTS/TSGS-0426449vf00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/8

3、8 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior w

4、ritten authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present docu

5、ment should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one o

6、f the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content o

7、f the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Me

8、mbers. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 126 449 V15.0.0 (2018

9、-07)23GPP TS 26.449 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-mem

10、bers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuan

11、t to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present docume

12、nt. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradena

13、me. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present docu

14、ment may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webap

15、p.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provis

16、ions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 126 449 V15.0.0 (2018-07)33GPP TS 26.449 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 Reference

17、s 5g33 Abbreviations . 5g34 General . 5g35 Functions on the transmit (TX) side . 6g35.1 EVS primary CNG operation . 6g35.2 EVS AMR-WB IO CNG operation 6g36 Functions on the receive (RX) side 7g36.1 EVS primary CNG operation . 7g36.2 EVS AMR-WB IO CNG operation 7g37 Computational details and bit allo

18、cation 7g3Annex A (informative): Change history . 8g3History 9g3ETSI ETSI TS 126 449 V15.0.0 (2018-07)43GPP TS 26.449 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to

19、continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit:

20、1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editor

21、ial only changes have been incorporated in the document. ETSI ETSI TS 126 449 V15.0.0 (2018-07)53GPP TS 26.449 version 15.0.0 Release 151 Scope The present document gives an overview for the requirements of the background acoustic noise evaluation, noise parameter encoding/decoding and comfort noise

22、 generation for the Enhanced Voice Services (EVS) speech codec during Discontinuous Transmission (DTX) operation. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified

23、 by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific referenc

24、e implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 26.445: “Codec for Enhanced Voice Services (EVS); Codec Detailed Algorithmic Description“. 3 3GPP TS 26.442: “Codec for Enhanced V

25、oice Services (EVS); EVS Codec ANSI C code (fixed-point)“. 4 3GPP TS 26.443: “Codec for Enhanced Voice Services (EVS); EVS Codec ANSI C code (floating-point)“. 3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation de

26、fined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. CNG Comfort Noise Generation EVS Enhanced Voice Services FD-CNG Frequency Domain based CNG LP-CNG Linear Prediction based CNG SID Silence Insertion Descriptor 4 General The present do

27、cument gives an overview for the requirements of the background acoustic noise evaluation, noise parameter encoding/decoding and comfort noise generation for the Enhanced Voice Services (EVS) speech codec during Discontinuous Transmission (DTX) operation. The present document is mandatory for implem

28、entation in all network entities and UEs supporting the EVS codec. In the case of discrepancy between the EVS comfort noise aspects described in the present document and its ANSI-C code specification contained in 3, the procedure defined by 3 prevails. In the case of discrepancy between the procedur

29、e described in the present document and its ANSI-C code specification contained in 4, the procedure defined by 4 prevails. A basic problem when using DTX is that the background acoustic noise, which is transmitted together with the speech, would disappear when the transmission is cut, resulting in d

30、iscontinuities of the background noise. Since the DTX switching can take place rapidly, it has been found that this effect can be very annoying for the listener - especially in a car environment with high background noise levels. In bad cases, the speech may be hardly intelligible. ETSI ETSI TS 126

31、449 V15.0.0 (2018-07)63GPP TS 26.449 version 15.0.0 Release 15The present document specifies the way to overcome this problem by generating on the receive (RX) side synthetic noise similar to the transmit (TX) side background noise. The comfort noise parameters are estimated on the TX side and trans

32、mitted to the RX side at a regular rate when speech is not present. This allows the comfort noise to adapt to the changes of the noise on the TX side. The Enhanced Voice Services (EVS) speech codec supports two Comfort Noise Generation (CNG) schemes, a linear prediction based CNG (LP-CNG) as well as

33、 a frequency domain based scheme (FD-CNG). The selection of the one of the two schemes is performed within the transmit side functions on an input signal bases. The parameters for generating the comfort noise are packed as a Silence Insertion Descriptor (SID) payload. The update rate of the SID payl

34、oad can be configured to a fixed number or to a mode where the update rate is adaptively modified according to the background noise. The fixed rate mode is limited to updates between 1 and 100 frames while in the adaptive rate mode the updates are limited to 8 and 50 depending on the noise behaviour

35、. As the functions of the CNG processing are highly integrated into the speech codec and make use of other coding parameters, The present document only provides an overview of the functions. The relevant references to the algorithmic descriptions are provided in the following. 5 Functions on the tra

36、nsmit (TX) side 5.1 EVS primary CNG operation The CNG operation on the transmit side is described in figure 1. In DTX operation, the SID updater decides if any SID update is required. If the SID payload should be updated, the CNG Selector enables either the LP or the FD CNG encoder depending on the

37、signal characteristic of the background noise. The selected CNG encoder calculates the noise generation parameter and creates the related SID payload. Figure 1: Transmit side Comfort Noise Generator functions In 2, all TX functions are described in clause 5.6. The algorithmic description of the - SI

38、D Update mechanism can be found in sub-clause 5.6.1.1 and 5.6.1.2 - CNG Selector can be found in sub-clause 5.6.1.3 - LP-CNG encoder in sub-clause 5.6.2 - FD-CNG encoder in sub-clause 5.6.3. 5.2 EVS AMR-WB IO CNG operation The update rate is basically fixed to an update every 8thframe. However, when

39、 switching into DTX mode, the first and the third frame after active speech are coded by a SID frame. The CNG in the EVS AMR-WB interoperable modes is based the LP-CNG coding scheme only. The complete CNG TX description of the EVS AMR-WB IO mode can be found in 2, clause 5.7.12. ETSI ETSI TS 126 449

40、 V15.0.0 (2018-07)73GPP TS 26.449 version 15.0.0 Release 156 Functions on the receive (RX) side 6.1 EVS primary CNG operation The CNG operation on the receiver side is depicted in Figure 2. The first bit of the SID payload determines the CNG module. The remaining bits contain the information of the

41、noise generator parameters to render the signal. Figure 2: Receive side Comfort Noise Generator functions The RX CNG operation is described in clause 6.7. The synthesis of the LP-CNG is described in sub-clause 6.7.2 and the synthesis of FD-CNG is described in clause 6.7.3 in 2. 6.2 EVS AMR-WB IO CNG

42、 operation The CNG in the EVS AMR-WB interoperable modes use only the LP-CNG decoding scheme for rendering the AMR-WB compatible CN parameters. The complete CNG RX description of the EVS AMR-WB IO mode can be found in 2, clause 6.8.4. 7 Computational details and bit allocation A computational descri

43、ption of comfort noise encoding and generation in form of an ANSI-C source code is given in 3 for the fix point implementation and in 4 for the floating point implementation. For the EVS primary modes, the SID payload consists of 48 bits. The first bit of the payload determines the CNG scheme, where

44、 0 stands for the LP-CNG and 1 for the FD-CNG. For the EVS AMR-WB IO modes, the SID payload consists of 35 bits. ETSI ETSI TS 126 449 V15.0.0 (2018-07)83GPP TS 26.449 version 15.0.0 Release 15Annex A (informative): Change history Change history Date TSG # TSG Doc. CR Rev Subject/Comment Old New 2014

45、-09 65 SP-140464 Presented at TSG SA#65 for approval 1.0.0 2014-09 65 Approved at TSG SA#65 1.0.0 12.0.0 2015-12 70 Version for Release 13 12.0.0 13.0.0 Change history Date Meeting TDoc CR Rev Cat Subject/Comment New version 2017-03 75 Version for Release 14 14.0.0 2018-06 80 Version for Release 15 15.0.0 ETSI ETSI TS 126 449 V15.0.0 (2018-07)93GPP TS 26.449 version 15.0.0 Release 15History Document history V15.0.0 July 2018 Publication