ETSI TS 129 108-2018 Universal Mobile Telecommunications System (UMTS) LTE Application of the Radio Access Network Application Part (RANAP) on the E-interface (V15 0 0 3GPP TS 29 1.pdf

1、 ETSI TS 129 108 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); LTE; Application of the Radio Access Network Application Part (RANAP) on the E-interface (3GPP TS 29.108 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 129 108 V15.0.0 (2018-07)13GPP TS 29.108 vers

2、ion 15.0.0 Release 15Reference RTS/TSGR-0329108vf00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 78

3、03/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the pri

4、or written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present

5、document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to o

6、ne of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The conte

7、nt of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of it

8、s Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 129 108 V15.0.0 (

9、2018-07)23GPP TS 29.108 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non

10、-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pur

11、suant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present do

12、cument. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tra

13、dename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present

14、document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/w

15、ebapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of pr

16、ovisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 108 V15.0.0 (2018-07)33GPP TS 29.108 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 Refer

17、ences 5g33 Abbreviations . 5g34 Principles for the use of RANAP on the E-interface 6g34.1 General . 6g34.2 Transfer of RANAP layer 3 messages on the E-interface 6g34.3 Roles of 3G_MSC-A, 3G_MSC-I and 3G_MSC-T . 6g35 Use of the RANAP on the E-interface . 7g35.1 RAB Assignment 7g35.2 RAB Release Reque

18、st 7g35.3 Iu Release Request . 8g35.4 Relocation Resource Allocation . 8g35.5 Relocation Cancel. 8g35.6 Relocation Detect and Relocation Complete 8g35.7 CN Trace invocation 9g35.8 Security mode control 9g35.9 Location Reporting Control 9g35.10 Location Report 9g35.11 Direct Transfer . 9g35.12 Error

19、Indication 10g35.13 CN Deactivate Trace 10g35.14 Common ID 10g35.15 Location Related Data 10g35.16 UE Specific Information 10g35.17 RAB Modification Request 10g36 RANAP messages transferred on the E-interface 10g37 Exceptions for RANAP message contents and information element coding when transferred

20、 on the E-interface 12g37.1 Message Contents . 12g38 RANAP message error handling when transferred on the E-interface . 12g3Annex A (informative): Change history . 13g3History 14g3ETSI ETSI TS 129 108 V15.0.0 (2018-07)43GPP TS 29.108 version 15.0.0 Release 15Foreword This Technical Specification has

21、 been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an ident

22、ifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all change

23、s of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 108 V15.0.0 (2018-07)53GPP TS 29.108 version 15.0.0 Release 151 Scope The present document describes the subse

24、t of Radio Access Network Application Part (RANAP) messages and procedures, defined in 3GPP TS 25.413 4, which is used on the E-interface. A general description can be found in 3GPP TS 23.002 7 and 3GPP TS 23.009 2. For the initiation and execution of relocation of SRNS (relocation for short, throug

25、hout the whole document) between MSCs a subset of RANAP procedures are used. For the subsequent control of resources allocated to the User Equipment (UE) RANAP procedures are used. The Direct Transfer Elementary Procedure (EP) of RANAP, is used for the transfer of connection management and mobility

26、management messages between the UE and the controlling 3G_MSC. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version nu

27、mber, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that d

28、ocument in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary“. 2 3GPP TS 23.009: “Handover procedures“. 3 Void 4 3GPP TS 25.413: “UTRAN Iu Interface Radio Access Network Application Part (RANAP) signalling“. 5 3GPP TS 29.002: “Mobile Application Part (MAP) specification“. 6 3GP

29、P TS 29.010: “Information element mapping between Mobile Station - Base Station System (MS - BSS) and Base Station System - Mobile-services Switching Centre (BSS - MSC); Signalling procedures and the Mobile Application Part (MAP)“. 7 3GPP TS 23.002: “Network architecture“. 8 Void 3 Abbreviations For

30、 the purposes of the present document, the abbreviations defined in TR 21.905 1 and the following apply: 3G_MSC A third generation Mobile services Switching Centre that supports the Iu interface (and possibly also the A-interface) 3G_MSC-A The controlling 3G_MSC on which the call was originally esta

31、blished 3G_MSC-B The 3G_MSC to which the UE is handed over in a Basic Handover 3G_MSC-B The 3G_MSC to which the UE is handed over in a Subsequent Handover 3G_MSC-I Interworking 3G_MSC 3G_MSC-T Target 3G_MSC EP Elementary Procedure NNSF NAS Node Selection Function RNC Radio Network Controller ETSI ET

32、SI TS 129 108 V15.0.0 (2018-07)63GPP TS 29.108 version 15.0.0 Release 154 Principles for the use of RANAP on the E-interface 4.1 General The mechanism for the transfer of the RANAP messages on the E-interface is defined in TS 29.002 5. The operation of the relocation procedures between 3G_MSCs and t

33、he use of the RANAP messages for those procedures is described in TS 23.009 2 and TS 29.010 6. RANAP is defined to connect the RNS to both, the cs and ps domain of an UMTS CN. Procedures, messages and IEs, only defined for communication between the RNS and the ps domain of an UMTS CN will, of course

34、, never appear on the E-interface. In the same way as a the connection oriented service of SCCP is used for the messages relating to one UE on the 3G_MSC-RNS interface a TCAP dialogue is used on the E-interface for messages relating to one UE. As no correspondence to the connectionless service on th

35、e 3G_MSC-RNS interface is used on the E-interface none of the global procedures are applicable. The management of the terrestrial circuits between the 3G_MSCs is outside the scope of the E-interface (see TS 23.009 2), therefore all procedures, messages and information elements relating to terrestria

36、l circuits are also excluded from the RANAP procedures and messages used on the E-interface. 4.2 Transfer of RANAP layer 3 messages on the E-interface The RANAP data which on the 3G_MSC-RNS interface is contained in the user data field of the exchanged SCCP frames is on the E-interface transferred a

37、s the contents of the access network signalling info in the AN-APDU parameter as described in TS 29.002 5, indicating the access network protocol identification “ts3G-25413“. 4.3 Roles of 3G_MSC-A, 3G_MSC-I and 3G_MSC-T For the description in the present document, the 3G_MSCs functionality related t

38、o the relocation between 3G_MSCs has been split into three logical parts, 3G_MSC-A, 3G_MSC-T and 3G_MSC-I. The different roles need not necessarily be performed by different 3G_MSCs. 3G_MSC-A is the call/connection controlling part of the 3G_MSC where the call/connection was originally established a

39、nd the switching point for relocation between 3G_MSCs. (This corresponds to 3G_MSC-A as defined in TS 23.009 2 and TS 29.002 5). The 3G_MSC that is the 3G_MSC-A will not be changed during the duration of a call/connection. 3G_MSC-T is the part relating to the transitory state during the relocation f

40、or the 3G_MSC controlling the RNS the serving RNS functionality is relocated to, when basic relocation or subsequent relocation (see TS 23.009) take place. (This corresponds, depending on the type of relocation to 3G_MSC-A, 3G_MSC-B or 3G_MSC-B in TS 23.009 2 and TS 29.002 5). 3G_MSC-I is the part o

41、f a 3G_MSC through which the 3G_MSC-A, via an E-interface (or an internal interface) is in contact with the UE. (This corresponds, depending on the type of relocation to 3G_MSC-A, 3G_MSC-B or 3G_MSC-B in TS 23.009 2 and TS 29.002 5). The 3G_MSC that is the 3G_MSC-A can also have the role of either t

42、he 3G_MSC-I or the 3G_MSC-T during a period of the call/connection. The following is applicable for the involved 3G_MSCs concerning the exchange of RANAP data on an E-interface before and after a successful inter 3G_MSC relocation: 1) At basic relocation, two 3G_MSCs are involved, one 3G_MSC being 3

43、G_MSC-A and one being 3G_MSC-T. When this relocation has been performed, the two 3G_MSCs interworking on the E-interface have the roles of 3G_MSC-A and 3G_MSC-I respectively, i.e. the 3G_MSC that is the 3G_MSC-T during the relocation is now the 3G_MSC-I. 2) At subsequent relocation back to 3G_MSC-A,

44、 two 3G_MSCs are involved. The 3G_MSC having the role of 3G_MSC-A has also the role of 3G_MSC-T. The other 3G_MSC involved has the role of 3G_MSC-I. When this relocation has been completed, there is no exchange of RANAP data on the E-interface, i.e. the 3G_MSC being the 3G_MSC-I before and during th

45、e relocation is now no longer taking part. ETSI ETSI TS 129 108 V15.0.0 (2018-07)73GPP TS 29.108 version 15.0.0 Release 153) At subsequent relocation of SRNS to an 3G_MSC not being 3G_MSC-A, three 3G_MSCs are involved. The roles of these 3G_MSCs are 3G_MSC-A, 3G_MSC-I, and 3G_MSC-T respectively. Whe

46、n this relocation has been performed, the two 3G_MSCs interworking on an E-interface have the roles of 3G_MSC-A and 3G_MSC-I respectively, i.e. the 3G_MSC that is the 3G_MSC-T during the relocation is now the 3G_MSC-I and the 3G_MSC being 3G_MSC-I during the relocation is now no longer taking part.

47、5 Use of the RANAP on the E-interface The dedicated RANAP procedures used on the E-interface to some extent are: - RAB assignment; - RAB Release Request; - Iu Release Request; - Relocation resource allocation; - Relocation Detect; - Relocation Complete; - Relocation Cancel; - CN Invoke Trace; - Secu

48、rity mode control; - Location Reporting Control; - Location Report; - Direct Transfer; - Error Indication; - Common ID; - Location Related Data; - UE Specific Information; - RAB Modification Request. 5.1 RAB Assignment The RAB Assignment procedure (TS 25.413 4 subclause 8.2) is applied on the E-inte

49、rface with following conditions: - the 3G_MSC-A acts as the 3G_MSC; - the 3G_MSC-I acts as the RNS. The handling of terrestrial resources is not applicable, i.e. the RANAP IEs Transport Layer Address and Iu Transport Association will be assigned by the 3G_MSC-I. 5.2 RAB Release Request For the RAB Release Request procedure (TS 25.413 4 subclauses 8.3) the involved 3G_MSCs shall act according to the following: - the 3G_MSC-I acts as the RNS; - the 3G_MSC-A acts as the 3G_MSC. ETSI ETSI TS 129 108 V15.0.0 (2018-07)83GPP TS 29