ETSI TS 129 119-2017 Universal Mobile Telecommunications System (UMTS) LTE GPRS Tunnelling Protocol (GTP) specification for Gateway Location Register (GLR) (V14 0 0 3GPP TS 29 119 .pdf

1、 ETSI TS 129 119 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; GPRS Tunnelling Protocol (GTP) specification for Gateway Location Register (GLR) (3GPP TS 29.119 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 129 119 V14.0.0 (2017-04)13GPP TS 29.119 version

2、 14.0.0 Release 14Reference RTS/TSGC-0429119ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/

3、88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior

4、written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present doc

5、ument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one

6、of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content

7、of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks

8、 of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 129 119 V14.0.0 (2017-04)23GPP

9、TS 29.119 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI

10、 SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no i

11、nvestigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Sp

12、ecification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI delive

13、rables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interp

14、reted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 119 V14.0.0 (2017-04)33GPP TS 29.119 version 14.0.0 Release 14Contents Intelle

15、ctual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g31.1 References 5g32 Definitions and abbreviations . 5g32.1 Definitions 5g32.2 Abbreviations . 6g33 General . 6g34 Transmission order and bit definitions . 7g35 GTP header . 7g36 GTP Message and Message Formats

16、 7g36.1 Signalling Message Formats. 7g36.2 Path Management messages . 8g36.3 Tunnel Management messages . 8g36.4 Location Management message . 9g36.5 Mobility Management messages 9g36.6 Reliable delivery of signalling messages 9g36.7 Information element . 10g37 Signalling Plane (GTP-C) 10g38 GTP-U 1

17、0g39 Path Protocol 10g310 Error handling 10g311 Inter-PLMN GTP communication over the Gp Interface . 10g312 IP, the networking technology used by GTP 10g313 GTP parameters 10g3Annex A (informative): Change history . 11g3History 12g3ETSI ETSI TS 129 119 V14.0.0 (2017-04)43GPP TS 29.119 version 14.0.0

18、 Release 14Foreword The present document has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it

19、will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y th

20、e second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 119 V14.0.0 (2017-04)53GPP TS 29.119 version 14.0.0 Release 141 Sc

21、ope The present document describes the signalling requirements and procedures used at network elements related to the GLR for GTP within the 3GPP system at the application level. The present document gives the description of the systems needed only in the network utilising GLR as the delta document

22、against 3GPP TS 29.060. 1.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a

23、specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the pr

24、esent document. 1 3GPP TS 23.060: “General Packet Radio Service (GPRS); Service description Stage2“. 2 3GPP TS 23.119: “Gateway Location Register (GLR) stage2“. 3 3GPP TS 24.008: “Mobile radio interface layer 3 specification, Core Network Protocols Stage 3“. 4 3GPP TS 29.002: “Mobile Application Par

25、t (MAP) specification“. 5 3GPP TS 29.060: “General Packet Radio Service (GPRS); GPRS Tunnelling Protocol (GTP) across the Gn and Gp Interface“. 2 Definitions and abbreviations 2.1 Definitions For the purposes of the present document, the following terms and definitions apply. Gateway Location Regist

26、er: this entity handles location management of roaming subscriber in visited network without involving HLR Intermediate GSN: this entity is used as serving GSN towards home network and relay some PDU notification messages between serving GSN and Gateway GSN MM context: information sets held in MS an

27、d GSNs for a GPRS subscriber related to mobility management (MM) MM Context ID: IMSI or equivalent for use in conjunction with Anonymous Access (please refer to section GTP Header) Path: UDP/IP path and TCP/IP path are examples of paths that may be used to multiplex GTP tunnels Path Protocol: path P

28、rotocol is the protocol(s) used as a bearer of GTP between GSNs PDP: packet Data Protocol (PDP) is a network protocol used by an external packet data network interfacing to GPRS ETSI ETSI TS 129 119 V14.0.0 (2017-04)63GPP TS 29.119 version 14.0.0 Release 14PDP Context: information sets held in MS an

29、d GSNs for a PDP address Signalling message: GTP signalling messages are exchanged between GSN pairs in a path. The signalling messages are used to transfer GSN capability information between GSN pairs and to create, update and delete GTP tunnels T-PDU: original packet, for example an IP datagram, f

30、rom an MS or a network node in an external packet data network. A T-PDU is the payload that is tunnelled in the GTP tunnel Tunnel Endpoint Identifier (TEID): this field unambiguously identifies a tunnel endpoint in the receiving GTP-U or GTP-C protocol entity. The receiving end side of a GTP tunnel

31、locally assigns the TEID value the transmitting side has to use. The TEID values are exchanged between tunnel endpoints using GTP-C messages 2.2 Abbreviations For the purposes of the present document, the following abbreviations apply: GGSN Gateway GPRS support node GLR Gateway Location Register GPR

32、S General Packet Radio Service GTP GPRS Tunnelling Protocol IM_GSN Intermediate GSN IP Internet ProtocolGLR Gateway Location Register SGSN Serving GPRS support node TEID Tunnel Endpoint IDentifier UDP User Datagram Protocol 3 General The present document defines the GPRS Tunnelling Protocol (GTP) sp

33、ecific to the network with the GLR, i.e. the protocol between IM_GSN and other nodes (i.e. GGSN, SGSN and GTP-MAP protocol converting GSN). It includes only the GTP signalling but not data transfer procedures. The interface between IM_GSM and GGSN is either intra-PLMN interface or inter-PLMN interfa

34、ce. ETSI ETSI TS 129 119 V14.0.0 (2017-04)73GPP TS 29.119 version 14.0.0 Release 14SGSN GGSNIM_GSNGTP-MAPProtocolConvertingGSNHLRSignalling InterfaceSignalling and Data Transfer InterfaceGLRGTP-MAPProtocolConvertingGSNFigure 1: Logical Architecture for PS domain in the network with GLR The GTP proto

35、col is implemented only by IM_GSNs, SGSNs and GGSNs. No other systems need to be aware of GTP. GPRS MSs are connected to a SGSN without being aware of GTP. It is assumed that there will be a many-to-many relationship between IM_GSNs, SGSNs and GGSNs. An IM_GSN may provide service to many GGSNs. A SG

36、SN may provide service to many IM_GSNs and GGSNs. 4 Transmission order and bit definitions Transmission order and bit definitions on the interface between the IM_GSN and other nodes in the network with GLR are the same as that used in the network without the GLR, see 3GPP TS 29.060. 5 GTP header The

37、 GTP header used on interface between the IM_GSN and other nodes in the network with GLR is the same as that used in the network without the GLR, see 3GPP TS 29.060. 6 GTP Message and Message Formats The only signalling plane exists between the IM_GSN and other nodes (i.e. GGSN, SGSN and GTP-MAP pro

38、tocol converting GSN). 6.1 Signalling Message Formats GTP defines a set of signalling messages between two associated GSNs. The signalling messages to be used between the IM_GSN and other nodes are defined in the table below. For the GTP signalling messages to be used on other interfaces see 3GPP TS

39、 29.060. ETSI ETSI TS 129 119 V14.0.0 (2017-04)83GPP TS 29.119 version 14.0.0 Release 14Table 1: Signalling messages Message Type value (Decimal) Signalling message Reference 3 Version Not Supported 7.4.3 in 3GPP TS 29.060 27 PDU Notification Request 7.5.12 in 3GPP TS 29.060 28 PDU Notification Resp

40、onse 7.5.13 in 3GPP TS 29.060 29 PDU Notification Reject Request 7.5.14 in 3GPP TS 29.060 30 PDU Notification Reject Response 7.5.15 in 3GPP TS 29.060 32 Send Routeing Information for GPRS Request 7.6.1 in 3GPP TS 29.060 33 Send Routeing Information for GPRS Response 7.6.2 in 3GPP TS 29.060 34 Failu

41、re Report Request 7.6.3 in 3GPP TS 29.060 35 Failure Report Response 7.6.4 in 3GPP TS 29.060 6.2 Path Management messages The messages, which are listed in following table, are used on the interface between the IM_GSN and other nodes. For the definitions of these messages and other messages used on

42、the other interfaces refer to the corresponding sections in 3GPP TS 29.060. Messages Sending node Receiving node Version Not Supported IM_GSN GGSN, SGSN GGSN, SGSN IM_GSN 6.3 Tunnel Management messages In following table, only the messages used between the IM_GSN and GGSN and between the IM_GSN and

43、SGSN are listed. For the definitions of these messages and other messages used on the other interfaces refer to the corresponding sections in 3GPP TS 29.060. Messages Sending node Receiving node PDU Notification Request GGSN IM_GSN IM_GSN SGSNPDU Notification Response SGSN IM_GSN IM_GSN GGSN PDU Not

44、ification Reject Request SGSN IM_GSN IM_GSN GGSN PDU Notification Reject Response GGSN IM_GSN IM_GSN SGSNETSI ETSI TS 129 119 V14.0.0 (2017-04)93GPP TS 29.119 version 14.0.0 Release 146.4 Location Management message In the network with the GLR, The optional Location Management messages are defined t

45、o support the case when Network-Requested PDP Context Activation procedures are used and an IM_GSN does not have a SS7 MAP interface. GTP is then used to transfer signalling messages between the IM_GSN and a GTP-MAP protocol-converting GSN in the GPRS backbone network. The GTP-MAP protocol-convertin

46、g GSN converts the signalling messages described in this section between GTP and MAP. The MAP messages are sent to and received from the GLR. The GTP-MAP protocol-converting function is described in 3GPP TS 23.060. The MAP protocol describing the corresponding procedures and messages is described in

47、 3GPP TS 29.002. This alternative method is illustrated in Figure 2. L2L1MTP2MTP3IPL1SCCPUDPTCAPMAPGTP-MAP InterworkingGTPGSNIM_GSNL1MTP2MTP3SCCPTCAPMAPL1L2IPUDPGTPGLRFigure 2: IM_GSN - GLR Signalling via a GTP-MAP protocol-converter in a GSN In following table, only the messages used between the IM

48、_GSN and The GTP-MAP protocol-converting GSN are listed. For the definitions of these messages and other messages used on the other interfaces refer to the corresponding sections in 3GPP TS 29.060. Messages Sending node Receiving node Send Routeing Information for GPRS Request IM_GSN GTP-MAP protoco

49、l-converting Send Routeing Information for GPRS Response GTP-MAP protocol-converting IM_GSN Failure Report Request IM_GSN GTP-MAP protocol-converting Failure Report Response GTP-MAP protocol-converting IM_GSN 6.5 Mobility Management messages The messages belonging to the mobility management messages are not used on the interface between the IM_GSN and other nodes in the network with the GLR. 6.6 Reliable delivery of signalling messages For the Reliability mechanism in the IM_GSN, see section 7.8 in 3GPP TS 29.060. ETSI ETSI TS 129 119 V14.0.0 (2017-04)103GPP TS