ETSI TS 129 219-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Policy and charging control Spending limit re.pdf

1、 ETSI TS 129 219 V15.1.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control: Spending limit reporting over Sy reference point (3GPP TS 29.219 version 15.1.0 Release 15) TECHNICAL SPECIFICATION ETS

2、I ETSI TS 129 219 V15.1.0 (2018-07)13GPP TS 29.219 version 15.1.0 Release 15Reference RTS/TSGC-0329219vf10 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but no

3、n lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of

4、 the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific n

5、etwork drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find er

6、rors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm ex

7、cept as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI l

8、ogo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and o

9、wned by the GSM Association. ETSI ETSI TS 129 219 V15.1.0 (2018-07)23GPP TS 29.219 version 15.1.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential I

10、PRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are a

11、vailable on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which

12、 are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and co

13、nveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by E

14、TSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM

15、, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the

16、 ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 219 V15.1.0 (2018-07)33GPP TS 29.219 version 15.1.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3

17、Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Sy reference point . 7g34.1 Overview 7g34.2 Sy Reference model 8g34.3 Subscriber Spending Limits . 8g34.4 Functional elements 9g34.4.1 PCRF 9g34.4.2 OC

18、S 9g34.5 Spending Limits procedures over Sy reference point . 9g34.5.1 Initial/Intermediate Spending Limit Report Request 9g34.5.1.1 General 9g34.5.1.2 Detailed behaviour of the PCRF . 10g34.5.1.3 The behaviour of the OCS . 10g34.5.2 Spending Limit Report 11g34.5.2.1 General 11g34.5.2.2 The behaviou

19、r of the OCS . 11g34.5.2.3 Detailed behaviour of the PCRF . 11g34.5.3 Final Spending Limit Report Request . 12g34.5.3.1 General 12g34.5.3.2 Detailed behaviour of the PCRF . 12g34.5.3.3 The behaviour of the OCS . 12g34.5.4 Sy Session Termination by the OCS . 12g35 Sy protocol . 13g35.1 Protocol suppo

20、rt . 13g35.1.1 Use of Diameter base protocol 13g35.1.2 Void 13g35.1.3 Accounting functionality 13g35.1.4 Transport protocol 13g35.1.5 Advertising Application Support 13g35.1.6 Use of the Supported-Features AVP . 13g35.2 Initialization and maintenance of connection and session 14g35.3 Sy specific AVP

21、s 14g35.3.0 General 14g35.3.1 Policy-Counter-Identifier AVP . 15g35.3.2 Policy-Counter-Status AVP 15g35.3.3 Policy-Counter-Status-Report AVP 15g35.3.4 SL-Request-Type AVP . 15g35.3.5 Pending-Policy-Counter-Information AVP 16g35.3.6 Pending-Policy-Counter-Change-Time AVP . 16g35.3.7 SN-Request-Type A

22、VP . 16g35.4 Sy re-used AVPs 16g35.5 Sy specific Experimental-Result-Code AVP values . 17g35.5.1 General 17g35.5.2 Permanent Failures . 17g35.5.3 Transient Failures . 18g35.6 Sy Messages . 18g3ETSI ETSI TS 129 219 V15.1.0 (2018-07)43GPP TS 29.219 version 15.1.0 Release 155.6.1 Command-Code Values 18

23、g35.6.2 Spending-Limit-Request (SLR) command . 18g35.6.3 Spending-Limit-Answer (SLA) command 19g35.6.4 Spending-Status-Notification-Request (SNR) command 19g35.6.5 Spending-Status-Notification-Answer (SNA) command 19g35.6.6 Session-Termination-Request (STR) command . 20g35.6.7 Session-Termination-An

24、swer (STA) command 20g3Annex A (normative): User Identity for Fixed Broadband Access network convergence 21g3Annex B (informative): Change history . 22g3History 23g3ETSI ETSI TS 129 219 V15.1.0 (2018-07)53GPP TS 29.219 version 15.1.0 Release 15Foreword This Technical Specification has been produced

25、by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change o

26、f release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance,

27、 i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 219 V15.1.0 (2018-07)63GPP TS 29.219 version 15.1.0 Release 151 Scope The present document provides the stage 3 specification

28、 of the Sy reference point for the present release. The functional requirements and the stage 2 specifications of the Sy reference point are contained in TS 23.203 2. The Sy reference point lies between the Policy and Charging Rule Function (PCRF) and the Online Charging System (OCS). The internal O

29、CS functionality for policy counter provision management pertaining to Sy is specified in TS 32.296 16. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date o

30、f publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicit

31、ly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 23.203: “Policy Control and Charging architecture“. 3 Void. 4 IETF RFC 4005: “Diameter Network Access Server Application“ 5 IETF RFC 4006: “

32、Diameter Credit Control Application“. 6 IETF RFC 5719: “Updated IANA Considerations for Diameter Command Code Allocations” 7 IETF RFC 2234: “Augmented BNF for syntax specifications“. 8 3GPP TS 29.213:“Policy and charging control signalling flows and Quality of Service (QoS) parameter mapping“. 9 Voi

33、d. 10 Void. 11 Void. 12 Void. 13 IETF RFC 791:“Transmission Control Protocol“. 14 IETF RFC 4960:“Stream Control Transmission Protocol“. 15 3GPP TS 29.229:“Cx and Dx interfaces based on the Diameter protocol“. 16 3GPP TS 32.296:“Telecommunication management; charging management; Online Charging Syste

34、m (OCS) applications and interfaces“. 17 ETSI TS 283 034 v2.2.0:“Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Network Attachment Sub-System (NASS); e4 interface based on the DIAMETER protocol“. 18 IETF RFC 3046:“DHCP Relay Agent Information Optio

35、n“. 19 3GPP TS 29.212:“Policy and Charging Control (PCC); Reference points“. 20 IETF RFC 7683:“Diameter Overload Indication Conveyance“. ETSI ETSI TS 129 219 V15.1.0 (2018-07)73GPP TS 29.219 version 15.1.0 Release 1521 IETF RFC 7944: “Diameter Routing Message Priority“. 22 IETF draft-ietf-dime-load-

36、09: “Diameter Load Information Conveyance“. Editors note: The above document cannot be formally referenced until it is published as an RFC. 23 IETF RFC 6733: “Diameter Base Protocol“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions

37、given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. policy counter: A mechanism within the OCS to track spending applicable for a subscriber. policy counter identifier: A reference to a po

38、licy counter in the OCS for a subscriber. policy counter status: A label whose values are not standardized and that is associated with a policy counters value relative to the spending limit(s) (the number of possible policy counter status values for a policy counter is one greater than the number of

39、 thresholds associated with that policy counter, i.e policy counter status values describe the status around the thresholds). This is used to convey information relating to subscriber spending from OCS to PCRF. Specific labels are configured jointly in OCS and PCRF. spending limit: A spending limit

40、is the usage limit of a policy counter (e.g. monetary, volume, duration) that a subscriber is allowed to consume. spending limit report: a notification, containing the current policy counter status generated from the OCS to the PCRF via the Sy reference point. 3.2 Abbreviations For the purposes of t

41、he present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. DRMP Diameter Routing Message Priority OCS Online charging system OFCS Offline c

42、harging system PCEF Policy and Charging Enforcement Function PCRF Policy and Charging Rule Function RCAF RAN Congestion Awareness Function SLA Spending-Limit-Answer (SL-Answer)SLR Spending-Limit-Request (SL- Request) SNA Spending-Status-Notification-Answer (SN-Answer) SNR Spending-Status-Notificatio

43、n-Request (SN- Request) STA Session-Termination-Answer (ST-Answer)STR Session-Termination-Request (ST- Request) 4 Sy reference point 4.1 Overview The Sy reference point is located between the Policy and Charging Rules Function (PCRF) and the Online Charging System (OCS). The Sy reference point enabl

44、es transfer of policy counter status information relating to subscriber spending from OCS to PCRF and supports the following functions: - Request of policy counter status reporting from PCRF to OCS and subscribe to or unsubscribe from spending limit reports (i.e. notifications of policy counter stat

45、us changes). ETSI ETSI TS 129 219 V15.1.0 (2018-07)83GPP TS 29.219 version 15.1.0 Release 15- Notification of spending limit reports from OCS to PCRF. - Cancellation of spending limit reporting from PCRF to OCS. Since the Sy reference point resides between the PCRF and OCS in the HPLMN, roaming with

46、 home routed or visited access as well as non-roaming scenarios are supported in the same manner. The stage 2 level requirements for the Sy reference point are defined in 3GPP TS 23.203 2. Signalling flows related to the Sy interface are specified in 3GPP TS 29.213 8. Refer to Annex G of 3GPP TS 29.

47、213 8 for Diameter overload control procedures over the Sy interface. Refer to Annex J of 3GPP TS 29.213 8 for Diameter message priority mechanism procedures over the Sy interface. Refer to Annex K of 3GPP TS 29.213 8 for Diameter load control procedures over the Sy interface. 4.2 Sy Reference model

48、 The Sy reference point is defined between the PCRF and the OCS. The relationships between the involved functional entities are depicted in figure 4.2.1. The overall PCC architecture is depicted in clause 3a of 3GPP TS 29.213 8 OCSg3Syg3PCRFg3Figure 4.2.1: Sy reference model .Figure 4.2.2: Void 4.3

49、Subscriber Spending Limits Policy decisions based on spending limits is a function that allows the PCRF to make policy decisions based on the status of policy counters that are maintained in the OCS. The PCRF uses the policy counter statuses received from the OCS as input to its policy decisions, e.g. downgrade the QoS (e.g. APN-AMBR) or modify the PCC/QoS/ADC Rules. When the status of policy counters is first required to make a policy decision for a subscriber, the PCRF uses the Initial Spending Limit Rep