ETSI TS 129 336-2017 Universal Mobile Telecommunications System (UMTS) LTE Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applicati.pdf

1、 ETSI TS 1Universal Mobile TelHome Subscriber Seinterworking with pac(3GPP TS 29.3TECHNICAL SPECIFICATION129 336 V13.6.0 (2017elecommunications System (LTE; Server (HSS) diameter interfaacket data networks and appl.336 version 13.6.0 Release 1317-01) (UMTS); faces for plications 13) ETSI ETSI TS 129

2、 336 V13.6.0 (2017-01)13GPP TS 29.336 version 13.6.0 Release 13Reference RTS/TSGC-0429336vd60 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregi

3、stre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present docu

4、ment shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive with

5、in ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the prese

6、nt document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorize

7、d by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTES

8、TSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association.

9、 ETSI ETSI TS 129 336 V13.6.0 (2017-01)23GPP TS 29.336 version 13.6.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI memb

10、ers and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi

11、.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the

12、 present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as bein

13、g references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “w

14、ill not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 336 V13.6.0 (2017-01)33GPP TS 29.

15、336 version 13.6.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 9g33.1 Abbreviations . 9g34 General Description 9g34.1 Introduction 9g35 Diameter-based S6m/S6n Interface

16、 11g35.1 Introduction 11g35.2 Procedure Descriptions . 11g35.2.1 Subscriber Information Retrieval 11g35.2.1.1 General 11g35.2.1.2 Detailed Behaviour of the HSS . 13g35.2.1.3 Detailed Behaviour of the MTC-IWF . 14g35.2.1.4 Detailed Behaviour of the MTC-AAA 14g36 Protocol Specification 14g36.1 Introdu

17、ction 14g36.1.1 Use of Diameter Base Protocol . 14g36.1.2 Securing Diameter Messages 14g36.1.3 Accounting Functionality . 15g36.1.4 Use of Sessions . 15g36.1.5 Transport Protocol 15g36.1.6 Routing Considerations . 15g36.1.7 Advertising Application Support 15g36.1.8 Diameter Application Identifier 16

18、g36.1.9 Use of the Supported-Features AVP . 16g36.1.10 User Identity to HSS resolution 16g36.2 Commands 16g36.2.1 Introduction. 16g36.2.2 Command-Code values . 16g36.2.3 Subscriber-Information-Request (SIR) Command . 17g36.2.4 Subscriber-Information-Answer (SIA) Command 17g36.3 Result-Code AVP and E

19、xperimental-Result AVP Values . 18g36.3.1 General 18g36.3.2 Success 18g36.3.3 Permanent Failures . 18g36.3.3.1 DIAMETER_ERROR_USER_UNKNOWN (5001) 18g36.3.3.2 DIAMETER_ERROR_UNAUTHORIZED_REQUESTING_ENTITY (5510) . 18g36.3.3.3 DIAMETER_ERROR_UNAUTHORIZED_SERVICE (5511) . 18g36.4 AVPs 18g36.4.1 General

20、 18g36.4.2 User-Identifier . 19g36.4.3 Service-ID . 20g36.4.4 SCS-Identity . 20g36.4.5 Service-Parameters . 20g36.4.6 T4-Parameters . 20g36.4.7 Service-Data . 21g36.4.8 T4-Data . 21g3ETSI ETSI TS 129 336 V13.6.0 (2017-01)43GPP TS 29.336 version 13.6.0 Release 136.4.9 HSS-Cause 21g36.4.10 SIR-Flags 2

21、1g36.4.11 External-Identifier . 22g36.4.12 Serving-Node 22g36.4.13 Additional-Serving-Node 23g36.4.14 IP-SM-GW-Number . 23g36.4.15 IP-SM-GW-Name . 23g36.4.16 OC-Supported-Features 23g36.4.17 OC-OLR . 23g36.4.18 IP-SM-GW-Realm 24g36.4.19 DRMP . 24g37 Diameter-based S6t Interface . 24g37.1 Introductio

22、n 24g37.2 Procedure Descriptions . 24g37.2.1 Configuration Information on S6t . 24g37.2.1.1 General 24g37.2.1.2 Detailed Behaviour of the HSS . 26g37.2.1.3 Detailed Behaviour of the SCEF . 27g37.2.2 Reporting on S6t . 27g37.2.2.1 General 27g37.2.2.2 Detailed Behaviour of the HSS . 28g37.2.2.3 Detail

23、ed Behaviour of the SCEF . 28g37.2.3 NIDD Information on S6t . 29g37.2.3.1 General 29g37.2.3.2 Detailed Behaviour of the HSS . 30g37.2.3.3 Detailed Behaviour of the SCEF . 30g38 Protocol Specification for S6t 31g38.1 Introduction 31g38.1.1 Use of Diameter Base Protocol . 31g38.1.2 Securing Diameter

24、Messages 31g38.1.3 Accounting Functionality . 31g38.1.4 Use of Sessions . 31g38.1.5 Transport Protocol 31g38.1.6 Routing Considerations . 31g38.1.7 Advertising Application Support 32g38.1.8 Diameter Application Identifier 32g38.1.9 Use of the Supported-Features AVP . 32g38.1.10 User Identity to HSS

25、resolution 32g38.2 Commands 32g38.2.1 Introduction. 32g38.2.2 Command-Code values . 33g38.2.3 Configuration Information Request (CIR) Command 33g38.2.4 Configuration-Information-Answer (CIA) Command 33g38.2.5 Reporting-Information-Request (RIR) Command 34g38.2.6 Reporting-Information-Answer (RIA) Co

26、mmand 34g38.2.7 NIDD Information Request (NIR) Command. 35g38.2.8 NIDD-Information-Answer (NIA) Command 35g38.3 Result-Code AVP and Experimental-Result AVP Values . 35g38.3.1 General 35g38.3.2 Success 35g38.3.3 Permanent Failures . 36g38.3.3.1 DIAMETER_ERROR_USER_UNKNOWN (5001) 36g38.3.3.2 DIAMETER_

27、ERROR_UNAUTHORIZED_REQUESTING_ENTITY (5510) . 36g38.3.3.3 DIAMETER_ERROR_UNAUTHORIZED_SERVICE (5511) . 36g38.3.3.4 DIAMETER_ERROR_REQUESTED_RANGE_IS_NOT ALLOWED (5512) 36g38.3.3.5 DIAMETER_ERROR_CONFIGURATION_EVENT_STORAGE_NOT_ SUCCESSFUL (5513) 36g38.3.3.6 DIAMETER_ERROR_CONFIGURATION_EVENT_NON_EXI

28、STANT (5514) 36g38.3.3.7 DIAMETER_ERROR_USER_NO_APN_SUBSCRIPTION (5451) . 36g38.4 AVPs 36g3ETSI ETSI TS 129 336 V13.6.0 (2017-01)53GPP TS 29.336 version 13.6.0 Release 138.4.1 General 36g38.4.2 Monitoring-Event-Configuration 38g38.4.3 Monitoring-Event-Report . 39g38.4.4 SCEF-Reference-ID 39g38.4.5 S

29、CEF-ID . 39g38.4.6 SCEF-Reference-ID-for-Deletion . 40g38.4.7 Monitoring-Type . 40g38.4.8 Maximum-Number-of-Reports . 40g38.4.9 UE-Reachability-Configuration 40g38.4.10 Monitoring-Duration . 40g38.4.11 Maximum-Detection-Time . 40g38.4.12 Reachability-Type . 40g38.4.13 Maximum-Latency 41g38.4.14 Maxi

30、mum-Response-Time . 41g38.4.15 Location-Information-Configuration 41g38.4.16 MONTE-Location-Type . 41g38.4.17 Accuracy . 41g38.4.18 Association-Type 41g38.4.19 Roaming-Information . 42g38.4.20 Reachability-Information 42g38.4.21 EPS-Location-Information 42g38.4.22 IMEI-Change 42g38.4.23 Feature-List

31、 AVP 42g38.4.23.1 Feature-List AVP for the S6t application 42g38.4.24 Monitoring-Event-Config-Status 43g38.4.25 AESE-Communication-Pattern . 43g38.4.26 Communication-Pattern-Set 44g38.4.27 Periodic-Communication-Indicator 44g38.4.28 Communication-duration-time 44g38.4.29 Periodic-time. 44g38.4.30 Sc

32、heduled-communication-time . 44g38.4.31 Stationary indication . 45g38.4.32 AESE-Communication-Pattern-Config-Status . 45g38.4.33 AESE-Error-Report 45g38.4.34 MME-Location-Information . 45g38.4.35 SGSN-Location-Information 46g38.4.36 User-Identifier . 46g38.4.37 Service-Result . 46g38.4.38 Service-Re

33、sult-Code . 47g38.4.39 CIR-Flags 47g38.4.40 Supported-Services . 47g38.4.41 Supported-Monitoring-Events 47g38.4.42 Reference-ID-Validity-Time. 48g38.4.43 Event-Handling . 48g38.4.44 NIDD-Authorization-Request . 48g38.4.45 NIDD-Authorization-Response 48g38.4.46 DRMP . 49g38.4.47 Service-Report 49g38.

34、4.48 Node-Type 49g38.4.49 Service-Selection 49g38.4.50 S6t-HSS-Cause . 49g3Annex A (normative): Diameter overload control mechanism 50g3A.1 General . 50g3A.2 S6m interface 50g3A.2.1 General 50g3A.2.2 HSS behaviour 50g3A.2.3 MTC-IWF behaviour 50g3A.3 S6t interface 50g3A.3.1 General 50g3A.3.2 HSS beha

35、viour 51g3A.3.3 SCEF behaviour 51g3ETSI ETSI TS 129 336 V13.6.0 (2017-01)63GPP TS 29.336 version 13.6.0 Release 13Annex B (Informative): Diameter overload control node behaviour . 52g3B.1 Introduction 52g3B.2 Message prioritisation over S6m 52g3B.3 Message prioritisation over S6t 52g3Annex C (normat

36、ive): Diameter message priority mechanism 53g3C.1 General . 53g3C.2 S6m, S6n, S6t interfaces . 53g3Annex D (informative): Change history . 54g3History 56g3ETSI ETSI TS 129 336 V13.6.0 (2017-01)73GPP TS 29.336 version 13.6.0 Release 13Foreword This Technical Specification has been produced by the 3rd

37、Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release

38、date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. tech

39、nical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 336 V13.6.0 (2017-01)83GPP TS 29.336 version 13.6.0 Release 131 Scope The present document describes the Diameter-based interfaces betw

40、een the HSS and other network elements involved in the architecture for interworking with packet data networks and applications, such as Machine-Type Communications (MTC). In particular, this document specifies the S6m interface between the Home Subscriber Server (HSS) and the MTC Interworking Funct

41、ion (MTC-IWF), the S6n interface between the HSS and the MTC-AAA and the S6t interface between the HSS and the Service Capability Exposure Function (SCEF). The procedures over those interfaces are defined in 3GPP TS 23.682 2. 2 References The following documents contain provisions which, through ref

42、erence in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest ve

43、rsion applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 23.682: “Architect

44、ure enhancements to facilitate communications with packet data networks and applications“. 3 IETF RFC 3588: “Diameter Base Protocol“. 4 3GPP TS 33.210: “3G security; Network Domain Security (NDS); IP network layer security“. 5 IETF RFC 4960: “Stream Control Transport Protocol“. 6 3GPP TS 29.228: “IP

45、 multimedia (IM) Subsystem Cx Interface; Signalling flows and Message Elements“. 7 3GPP TS 29.229: “Cx and Dx interfaces based on the Diameter protocol; protocol details “. 8 3GPP TS 29.173: “Diameter-based SLh interface for Control Plane LCS“. 9 IETF RFC 5234: “Augmented BNF for Syntax Specificatio

46、ns: ABNF“. 10 3GPP TS 29.329: “Sh Interface based on the Diameter protocol“. 11 3GPP TS 23.003: “Numbering, addressing and identification“. 12 3GPP TS 29.338: “Diameter based protocols to support SMS capable MMEs“. 13 3GPP TS 29.368: “Tsp interface protocol between the MTC Interworking Function (MTC

47、-IWF) and Service Capability Server (SCS)“. 14 3GPP TS 29.272: “Mobility Management Entity (MME) and Serving GPRS Support Node (SGSN) related interfaces based on Diameter protocol“. 15 IETF RFC 7683 : “Diameter Overload Indication Conveyance“. 16 3GPP TS 32.299: “Telecommunication management; Chargi

48、ng management; Diameter charging applications“. ETSI ETSI TS 129 336 V13.6.0 (2017-01)93GPP TS 29.336 version 13.6.0 Release 1317 3GPP TS 29.217: “Congestion Reporting Over Np Reference Point“. 18 IETF RFC 5777: “Traffic Classification and Quality of Service (QoS) Attributes for Diameter“. 19 3GPP T

49、S 23.007: “Restoration procedures“. 20 IETF RFC 7944: “Diameter Routing Message Priority“. 21 IETF RFC 5778: “Diameter Mobile IPv6: Support for Home Agent to Diameter Server Interaction“. 3 Definitions, symbols and abbreviations 3.1 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. AAA Authentication, Authorization and Accounti