ETSI TS 131 048-2005 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Security mechanisms for the (U)SIM application toolkit .pdf

1、 ETSI TS 131 048 V5.1.0 (2005-10)Technical Specification Digital cellular telecommunications system (Phase 2+);Universal Mobile Telecommunications System (UMTS);Security mechanisms for the (U)SIM application toolkit;Test specification (3GPP TS 31.048 version 5.1.0 Release 5)GLOBAL SYSTEM FOR MOBILE

2、COMMUNICATIONSRfloppy3 ETSI ETSI TS 131 048 V5.1.0 (2005-10) 1 3GPP TS 31.048 version 5.1.0 Release 5 Reference RTS/TSGC-0631048v510 Keywords GSM, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 7

3、42 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of exi

4、sting or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present doc

5、ument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the fol

6、lowing services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2005. All rig

7、hts reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and

8、of the 3GPP Organizational Partners. ETSI ETSI TS 131 048 V5.1.0 (2005-10) 2 3GPP TS 31.048 version 5.1.0 Release 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any,

9、 is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on

10、the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) whi

11、ch are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or G

12、SM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp . ETSI ETSI TS 131 048 V5.1.0 (2005-10) 3 3GPP TS 31.048 version 5.1.0 Rel

13、ease 5 Contents Intellectual Property Rights2 Foreword.2 Foreword.8 1 Scope 9 2 References 9 3 Definitions and abbreviations.10 3.1 Definitions10 3.2 Abbreviations .10 4 Test Environment .10 4.1 Applicability.11 4.2 Test environment description .11 4.3 Tests format12 4.3.1 Test Area Reference12 4.3.

14、1.1 Format description 12 4.3.1.1 Conformance requirements .12 4.3.1.2 Test Area Files 12 4.3.1.3 Test Procedure.13 4.3.1.4 Test Coverage .13 4.4 Initial Conditions13 4.4.1 Security parameters.13 4.4.2 Prepersonalisation.14 4.4.3 Environment .15 4.5 Package name.16 4.6 AID Coding16 4.6.2 Specific Te

15、st Applet Name .16 4.7 Test Equipment 17 4.7.1 APDU tool 17 4.7.2 Util packages 17 4.7.3 Applet installation parameters 17 4.7.3.1 Security parameters.17 4.7.3.2 Loading components .17 4.8 Testing methodology17 4.8.1 Test interfaces and facilities17 5 Test specification18 5.1 Generalised secured pac

16、ket structure .18 5.1.1 Command packet structure .18 5.1.1.1 Conformance Requirements18 5.1.2 Response packet structure.19 5.1.2.1 Conformance Requirements19 5.2 Implementation for SMS-PP 20 5.2.1 Structure of the SMS.20 5.2.1.1 Commands Description.20 5.2.1.1.1 Conformance Requirements 20 5.2.1.1.2

17、 Test Area Files.20 5.2.1.1.3 Test Procedure.20 5.2.1.1.4 Test Coverage21 5.2.2 Command Packet contained in a Single SMS-PP.22 5.2.2.1 Commands Description.22 5.2.2.1.1 Conformance Requirements 22 5.2.2.1.2 Test Area Files.22 5.2.2.1.3 Test Procedure.22 5.2.2.1.4 Test Coverage25 5.2.3 Command Packet

18、 contained in a Concatenated SMS-PP25 ETSI ETSI TS 131 048 V5.1.0 (2005-10) 4 3GPP TS 31.048 version 5.1.0 Release 5 5.2.3.1 Commands Description.25 5.2.3.1.1 Conformance Requirements 25 5.2.3.1.2 Test Area Files.25 5.2.3.1.3 Test Procedure.25 5.2.3.1.4 Test Coverage28 5.2.4 Response packet structur

19、e.28 5.2.4.1 Commands Description.28 5.2.4.1.1 Conformance Requirements 28 5.2.4.1.2 Test Area Files.28 5.2.4.1.3 Test Procedure.28 5.2.4.1.4 Test Coverage29 5.2.5 Security Mechanism for the Command Packet.29 5.2.5.1 Commands Description.29 5.2.5.1.1 Conformance Requirements 29 5.2.5.1.2 Test Area F

20、iles.30 5.2.5.1.3 Test Procedure.30 5.2.5.1.3.1 (U)SIM_SEC_SPP_SMC_1, Testfocus counter.30 5.2.5.1.3.2 (U)SIM_SEC_SPP_SMC_2, Testfocus integrity.33 Default settings 34 5.2.5.1.3.3 (U)SIM_SEC_SPP_SMC_3, Testfocus ciphering .36 5.2.5.1.3.4 (U)SIM_SEC_SPP_SMC_4, Testfocus mixed mode integrity, cipherin

21、g and counter .39 5.2.5.1.4 Test Coverage42 5.2.6 Security Mechanism for the Response Packet 42 5.2.6.1 Commands Description.42 5.2.6.1.1 Conformance Requirements 42 5.2.6.1.2 Test Area Files.43 5.2.6.1.3 Test Procedure.44 5.2.6.1.4 Test Coverage53 5.3 Implementation for SMS-CB .53 5.3.1 Structure o

22、f the CBS page in the SMS-CB Message 53 5.3.1.1 Conformance Requirements53 5.3.1.2 Test suites files54 5.3.1.3 Test coverage 56 5.3.2 A Command Packet structure contained in a SMS-CB message 56 5.3.2.1 Conformance Requirements56 5.3.2.2 Test suites files56 5.3.2.3 Test coverage 57 5.3.3 Security mec

23、hanism for SMS-CB.57 5.3.3.1 Conformance Requirements57 5.3.3.2 Test suites files58 5.3.3.3 Test procedure.59 5.3.3.3.1 (U)SIM_SEC_SCB_SMC_1, Testfocus counter 59 5.3.3.3.2 (U)SIM_SEC_SCB_SMC_2, Testfocus integrity .63 5.3.3.3.3 (U)SIM_SEC_SCB_SMC_3, Testfocus ciphering65 5.3.3.3.4 (U)SIM_SEC_SCB_SM

24、C_4, Testfocus mixed mode integrity, ciphering and counter 69 5.3.3.4 Test coverage 72 5.4 Remote File Management for SIM.73 5.4.1 Behaviour of the Remote File Management Application73 5.4.1.1 Command session description.73 5.4.1.1.1 Conformance Requirement73 5.4.1.1.2 Test Area Files.73 5.4.1.1.3 T

25、est Coverage74 5.4.2 Coding of the command75 5.4.2.1 SIM Input command .75 5.4.2.1.1 Conformance Requirement75 5.4.2.1.2 Test suites files 75 5.4.2.1.3 Test coverage.78 5.4.2.2 SIM Output command.78 5.4.2.2.1 Conformance requirement .78 5.4.2.2.2 Test suites files 78 5.4.2.2.3 Test coverage.79 5.4.3

26、 SIM specific behaviour for Response Packets (Using SMS_PP)79 ETSI ETSI TS 131 048 V5.1.0 (2005-10) 5 3GPP TS 31.048 version 5.1.0 Release 5 5.4.3.1 Conformance requirements .79 5.4.3.2 Test Area Files 80 5.4.3.3 Test Coverage .81 5.5 Remote File Management for USIM81 5.5.1 Behaviour of the Remote F

27、ile Management Application81 5.5.1.1 Conformance Requirement .81 5.5.1.2 Test Area Files 81 5.5.1.3 Test Coverage .82 5.5.2 Coding of the command83 5.5.2.1 USIM Input command.83 5.5.2.1.1 Conformance requirements: 83 5.5.2.1.2 Test suites files 83 5.5.2.1.3 Test coverage.86 5.5.2.2 USIM Output comma

28、nd86 5.5.2.2.1 Conformance requirements: 86 5.5.2.2.2 Test Area Files.86 5.5.2.2.3 Test coverage.87 5.5.3 USIM specific behaviour for Response Packets (Using SMS_PP).87 5.5.3.1 Conformance requirements: 87 5.5.3.2 Test Area Files 88 5.5.3.3 Test Coverage .89 5.6 Remote Applet Management89 5.6.1 Remo

29、te Applet Management Application behaviour89 5.6.1.1 Command session description.89 5.6.1.1.1 Conformance Requirements 89 5.6.1.1.2 Test Area Files.89 5.6.1.1.3 Test Coverage90 5.6.1.2 Applet management behaviour90 5.6.1.2.1 Conformance Requirements 90 5.6.1.2.2 Test Area Files.91 5.6.1.2.3 Test Cov

30、erage94 5.6.2 Commands coding 94 5.6.2.1 Commands coding structure94 5.6.2.1.1 Conformance Requirements 94 5.6.2.1.2 Test Area Files.94 5.6.2.1.3 Test Coverage95 5.6.2.2 Input command coding95 5.6.2.2.1 Conformance Requirements 95 5.6.2.2.2 Test Area Files.95 5.6.2.2.3 Test Coverage96 5.6.2.3 Output

31、 command coding.96 5.6.2.3.1 Conformance Requirements 96 5.6.2.3.2 Test Area Files.96 5.6.2.3.3 Test Procedure.96 5.6.2.3.4 Test Coverage97 5.6.3 (U)SIM Response Packet97 5.6.3.1.1 Conformance Requirements 97 5.6.3.1.2 Test Area Files.97 5.6.3.1.4 Test Coverage98 5.7 Annex A commands .98 5.7.1 Apple

32、t Management Commands.98 5.7.1.1 Commands Description.98 5.7.1.1.1 Conformance Requirements 98 5.7.1.1.2 Test suite files98 7.1.1.1.3 Test Coverage102 5.7.2 Install commands 102 5.7.2.1 Install(Load) Command 102 5.7.2.1.1 Conformance Requirements 102 5.7.2.1.2 Test Area Files.103 5.7.2.1.3 Test Cove

33、rage105 5.7.2.2 Install (install) and install(install and make selectable) commands 105 5.7.2.2.1 Conformance Requirements 105 ETSI ETSI TS 131 048 V5.1.0 (2005-10) 6 3GPP TS 31.048 version 5.1.0 Release 5 5.7.2.2.2 Test Area Files.107 5.7.2.2.3 Test Coverage118 5.7.3 Delete command .118 5.7.4 Load

34、command .118 5.7.5 Put Key command.118 5.7.5.1 Command session description.118 5.7.5.1.1 Conformance Requirements 118 5.7.5.1.2 Test Area Files.119 5.7.5.1.3 Test Procedure.119 5.7.5.1.4 Test Coverage119 5.7.6 Set Status command119 Annex A (normative): Test area reference acronym table .120 Annex B

35、(normative): Script file syntax and format description 122 B.1 Syntax description122 B.2 Semantics .123 B.3 Example123 B.4 Style and formatting.124 Annex C (normative): Default Prepersonalisation125 C.1 General Default Prepersonalisation125 C.2 Sim.Access.SimView test default prepersonalisation 127

36、C.2.1 DFSIMTEST(SIM Test) .127 C.2.2 EFTNR(Transparent Never Read)127 C.2.3 EFTNU(Transparent Never Update) 128 C.2.4 EFTARU(Transparent Always Read and Update)128 C.2.5 EFCNR(Cyclic Never Read)128 C.2.6 EFCNU(Cyclic Never Update).129 C.2.7 EFCNIC(Cyclic Never Increase)129 C.2.8 EFCNIV(Cyclic Never

37、Invalidate) .129 C.2.9 EFCNRH(Cyclic Never Rehabilitate) .130 C.2.10 EFCARU(Cyclic Always Read and Update) 130 C.2.11 EFLNR(Linear Fixed Never Read) 130 C.2.12 EFLNU(Linear Fixed Never Update).131 C.2.13 EFLARU(Linear Fixed Always Read and Update).131 C.2.14 EFCINA(Cyclic Increase Not Allowed)131 C.

38、2.15 EFTRAC(Transparent Read Access Condition CHV2) 132 C.2.16 EFTIAC(Transparent Invalidate Access Condition CHV1)132 C.2.17 EFCIAC(Cyclic Increase Access Condition CHV2).132 C.2.18 EFCIAA(Cyclic Increase Access Condition ADM)133 C.2.19 EFCNRI(Cyclic Never Rehabilitate Invalidated)133 Annex D (norm

39、ative): Loading , testing and cleaning script examples.134 Annex E (normative): Test Area Files135 Annex F (Normative): Configuration Parameters File .136 F.1 Syntax.136 F.2 File Contents and Organisation 136 F.2.1 Default values, order and processing 137 F.2.2 CONVERT Section.137 F.2.3 INSTALL(load

40、) Section137 F.2.4 LOAD Section.137 F.2.5 INSTALL(install) Section.137 ETSI ETSI TS 131 048 V5.1.0 (2005-10) 7 3GPP TS 31.048 version 5.1.0 Release 5 F.3 Full example.138 Annex G (normative): Specific RFM tests applicability .140 Annex H (informative): Change history .141 History 142 ETSI ETSI TS 13

41、1 048 V5.1.0 (2005-10) 8 3GPP TS 31.048 version 5.1.0 Release 5 Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approva

42、l. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or

43、greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 131

44、048 V5.1.0 (2005-10) 9 3GPP TS 31.048 version 5.1.0 Release 5 1 Scope The present document covers the minimum characteristics considered as necessary in order to provide compliance to 3GPP TS 23.048 “ Security Mechanisms for the (U)SIM application toolkit; Stage 2“ 6. The present document describes

45、the technical characteristics and methods of test for testing the Security Mechanisms for the (U)SIM application toolkit. It specifies the following parts: - test applicability - test environment description - tests format - test area reference - conformance requirements - Test Area Files - test pro

46、cedure - test coverage - a description of the associated testing tools that shall be used. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication,

47、edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the la

48、test version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 23.040: “Technical realization of the Short Message Service (SMS)“. 3 3GPP TS 51.011 Release 4: “Specification of the Subscriber Identity Module - Mobile Equip

49、ment (SIM - ME) interface“. 4 3GPP TS 31.111: “USIM Application Toolkit (USAT)“. 5 3GPP TS 43.019: “Subscriber Identity Module Application Programming Interface (SIM API); SIM API for Java Card; Stage 2“. 6 3GPP TS 23.048: “Digital cellular telecommunications system (Phase 2+); Security Mechanisms for the SIM application toolkit; Stage 2“ 7 SUN Java Card Specification “Java Card 2.1 VM Architecture Specification“. 8 ETSI TS 101 220 Release 5: “Numbering System for Telecommunication IC card applications“. 9 3GPP TS 51.013: “Test specification for Subsc