ETSI TS 131 114-2009 Universal Mobile Telecommunications System (UMTS) LTE Universal Subscriber Identity Module Application Toolkit (USAT) interpreter protocol and administration《全.pdf

1、 ETSI TS 131 114 V8.0.0 (2009-03)Technical Specification Universal Mobile Telecommunications System (UMTS);LTE;Universal Subscriber Identity ModuleApplication Toolkit (USAT)interpreter protocol and administration (3GPP TS 31.114 version 8.0.0 Release 8)ETSI ETSI TS 131 114 V8.0.0 (2009-03) 1 3GPP TS

2、 31.114 version 8.0.0 Release 8 Reference RTS/TSGC-0631114v800 Keywords LTE, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Gras

3、se (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the r

4、eference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or

5、change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyr

6、ight Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo a

7、nd the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP

8、Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 131 114 V8.0.0 (2009-03) 2 3GPP TS 31.114 version 8.0.0 Release 8 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declare

9、d to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is

10、 available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not ref

11、erenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical speci

12、fications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. ETS

13、I ETSI TS 131 114 V8.0.0 (2009-03) 3 3GPP TS 31.114 version 8.0.0 Release 8 Contents Intellectual Property Rights2 Foreword.2 Foreword.6 1 Scope 7 2 References 7 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .8 3.3 Symbols9 4 TLV Format9 5 Transmission protocol 9 5.1 Transport

14、 bearer .10 5.2 TS 23.048 Security.10 5.3 Addressing and key selection .11 5.3.1 Configuration Sets 11 5.3.1.1 Configuration description13 5.3.1.1.1 TAR Value 13 5.3.1.1.2 23.048 Counter UI terminated .13 5.3.1.1.3 23.048 Counter UI originated13 5.3.1.1.4 23.048 KIc keys.13 5.3.1.1.5 23.048 KID keys

15、13 5.3.1.1.6 SPI, KIc and KID bytes to be used for USAT Interpreter originated messages 13 5.3.1.1.7 SPI, KIc and KID list to be checked for USAT Interpreter terminated messages .13 5.3.1.1.8 USAT Command list .14 5.3.1.1.9 USAT Interpreter byte code list.14 5.3.1.1.10 USAT Interpreter command list

16、for administration.14 5.3.1.1.11 Operational configuration modification 14 5.3.1.1.12 Bearer specific data set modification.15 5.3.1.1.13 Linked Pull TAR .15 5.3.1.1.14 Reference to a bearer specific data set.15 5.3.1.2 Configuration Selection in Operational Pull Mode.15 5.3.1.3 Configuration Select

17、ion in Operational Push Mode15 5.3.1.4 Configuration Selection in Administration Mode .16 5.3.2 Addressing for USAT Interpreter originated messages 16 5.3.2.1 Access Node16 5.3.2.2 Security Node16 5.3.2.3 Key selection in Security Node.16 5.3.2.4 Gateway Selector System16 5.3.2.5 Gateway 17 5.3.3 Ad

18、dressing for Gateway originated messages 17 5.4 USAT Interpreter originated Application Messages 17 5.4.1 USAT Interpreter originated BER-TLV for Operational Pull messages 17 5.4.1.1 Submit UI-TLV.18 5.4.1.2 RequestID UI-TLV .18 5.4.1.3 Gateway Address UI-TLV 18 5.4.1.4 Additional Information UI-TLV

19、 .19 5.4.2 USAT Interpreter originated BER-TLV for Administration Messages 19 5.4.2.1 ADM Response UI-TLV.20 5.4.2.2 RequestID UI-TLV .20 5.5 Gateway originated Application Messages 20 5.5.1 Gateway originated TLVs for Operational Messages.20 5.5.1.1 Page UI-TLV.21 5.5.1.2 RequestID UI-TLV .21 ETSI

20、ETSI TS 131 114 V8.0.0 (2009-03) 4 3GPP TS 31.114 version 8.0.0 Release 8 5.5.1.3 Inline Value UI-TLV containing the Push Information Text 21 5.5.2 Transport Protocol UIT TLV for Administration Messages.21 5.5.2.1 ADM Request UI-TLV .21 5.5.2.2 RequestID UI-TLV .21 5.6 Handling of Push Messages22 5.

21、7 Handling of Administration Messages .23 5.8 Error handling 24 6 Administration procedures .24 6.1 ADM Request.24 6.1.1 Attributes 24 6.1.2 ADM Commands25 6.1.2.1 Install Page25 6.1.2.1.1 Coding of the Install Page command.26 6.1.2.1.2 Attributes .26 6.1.2.1.3 TAR Value UI-TLV 26 6.1.2.1.4 Page UI-

22、TLV.26 6.1.2.1.5 Possible errors .26 6.1.2.2 Remove Page.26 6.1.2.2.1 Coding of the Remove Page command .27 6.1.2.2.2 Attributes .27 6.1.2.2.3 Page Identification UI-TLV.27 6.1.2.2.4 Possible errors .27 6.1.2.3 Configure USAT Interpreter Entering Menu Title27 6.1.2.3.1 Coding of the Configure UI Ent

23、ering Menu Title command.28 6.1.2.3.2 Inline Value UI-TLV.28 6.1.2.3.3 Icon Identifier UI-TLV28 6.1.2.3.4 Possible errors .28 6.1.2.4 Configure Menu Text for Page28 6.1.2.4.1 Coding of the Configure Menu Text for Page command 29 6.1.2.4.2 Inline Value UI-TLV.29 6.1.2.4.3 Page Identification UI-TLV.2

24、9 6.1.2.4.4 Possible errors .29 6.1.2.5 Remove Menu Text for Page 29 6.1.2.5.1 Coding of the Remove Menu Text for Page command .29 6.1.2.5.2 Page Identification UI-TLV.29 6.1.2.5.3 Possible errors .30 6.1.2.6 Install Event 30 6.1.2.6.1 Coding of the Install Event command .30 6.1.2.6.2 Additional Eve

25、nt Identifier30 6.1.2.6.3 Page Identification UI-TLV.30 6.1.2.6.4 Possible errors .30 6.1.2.7 Remove Event .31 6.1.2.8 Modify Environment Variable 31 6.1.2.8.1 Coding of the Modify Environment Variable command .31 6.1.2.8.2 Variable ID31 6.1.2.8.3 Inline Value UI-TLV.31 6.1.2.8.4 Possible errors .32

26、 6.1.2.9 Modify Wait State Message 32 6.1.2.9.1 Coding of the Modify Wait State Message command .32 6.1.2.9.2 Inline Value UI-TLV.32 6.1.2.9.3 Possible errors .32 6.1.2.10 Modify Configuration Data.32 6.1.2.10.1 Coding of the Modify Configuration command 32 6.1.2.10.2 TAR Value 32 6.1.2.10.3 Paramet

27、er List32 6.1.2.10.4 Possible errors .37 6.1.2.11 Modify Bearer Data.38 6.1.2.11.1 Coding of the Modify Bearer Data command .38 6.1.2.11.2 Bearer specific data set index 38 6.1.2.11.3 Type of bearer38 6.1.2.11.4 Parameter List for SMS bearer 38 ETSI ETSI TS 131 114 V8.0.0 (2009-03) 5 3GPP TS 31.114

28、version 8.0.0 Release 8 6.1.2.11.5 Parameter List for other bearers 39 6.1.2.11.6 Possible errors .39 6.1.2.12 Install Plug-In39 6.1.2.12.1 Coding of the Install Plug-In command.39 6.1.2.12.2 Plug-in Installation Data UI-TLV40 6.1.2.12.3 Possible errors .40 6.1.2.13 Remove Plug-In 40 6.1.2.13.1 Codi

29、ng of the Remove Plug-In command .40 6.1.2.13.2 Possible errors .40 6.2 ADM Response 40 6.2.1 ADM Response Structure .41 6.2.2 ADM Result UI-TLV41 6.3 Error coding41 7 Used tag values.41 7.1 BER-TLV tag values 41 7.2 UI-TLV tag values42 Annex A (informative): Change history .43 History 44 ETSI ETSI

30、TS 131 114 V8.0.0 (2009-03) 6 3GPP TS 31.114 version 8.0.0 Release 8 Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG ap

31、proval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval;

32、3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS

33、 131 114 V8.0.0 (2009-03) 7 3GPP TS 31.114 version 8.0.0 Release 8 1 Scope The present document specifies the transmission protocol to be used to communicate with the USAT Interpreter and the administrative structures and procedures to administer the USAT Interpreter. The present document does not s

34、pecify any USAT Interpreter byte code commands. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or no

35、n-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same R

36、elease as the present document. 1 3GPP TS 31.112: “USAT Interpreter Architecture Description; Stage 2“ 2 3GPP TS 31.113: “USAT Interpreter Byte Codes“ 3 3GPP TS 23.048: “Security Mechanisms for the (U)SIM Application Toolkit; Stage2“ 4 3GPP TS 31.111: “USIM Application Toolkit (USAT)“ 5 ISO/IEC 7816

37、-6 (1995): “Identification cards - Integrated circuit(s) cards with contacts, Part 6: Inter-industry data elements“ 6 3GPP TS 23.040: “Technical realization of the Short Message Service (SMS)“ 7 3GPP TS 23.038: “Alphabets and language-specific information“ 8 3GPP TS 24.011: “Point-to-Point (PP) Shor

38、t Message Service (SMS) support on mobile radio interface“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Access Mode: A Gateway Selector System consists of up to 3 different logical separate Gateway Selectors to

39、handle the different modes of access. The specified modes of access are Operational Pull, Operational Push and Administrative access. Application Message: The package of commands or data sent from the Sending Application to the Receiving Application, or vice versa, independently of the transport mec

40、hanism. An Application Message is transformed with respect to a chosen Transport Layer and chosen level of security into one or more secured packets. Configuration: A collection of parameters to be used by the USAT Interpreter for the TAR value assigned to that configuration, like keys to be used, c

41、ounters to be used, Access Node address, Security Node address, security parameters etc. Configuration Set: A set of up to 16 configurations assigned to an access mode. ETSI ETSI TS 131 114 V8.0.0 (2009-03) 8 3GPP TS 31.114 version 8.0.0 Release 8 Gateway: A network program that translates from a so

42、urce language to the USAT Interpreter byte codes. The gateway resides between the application provider“s server that contains pages written in the source language and a card containing the USAT Interpreter that will render these pages. Secured Packet: The information flow on top of which the level o

43、f required security has been applied. An Application Message is transformed with respect to a chosen Transport Layer and chosen level of security into one or more Secured Packets. Sending Application: The entity generating an Application Message to be sent. For the present document the Sending Appli

44、cation is the USAT Interpreter or the Gateway. Sending Entity: This is the entity from which the Secured Packet is sent and where the security mechanisms are invoked. The Sending Entity generates the Secured Packets to be sent. For the present document the Sending Entity is the USAT Interpreter Secu

45、rity Functionality or the Security Node. Receiving Entity: This is the entity where the Secured Packet is received and where the security mechanisms are utilised. The Receiving Entity processes the Secured Packets. For the present document the Receiving Entity is the USAT Interpreter Security Functi

46、onality or the Security Node. USAT Command: A proactive USIM Application Toolkit command as specified in TS 31.111 4. USAT Interpreter Command: A byte code command for the USAT Interpreter as specified in TS 31.113 2. 3.2 Abbreviations For the purposes of the present document, the following abbrevia

47、tions apply BER Basic Encoding Rules C Conditional CBC Cipher Block Chaining CC Cryptographic ChecksumCfg ConfigurationCNTR Counter DES Data Encryption Standard DCS Data Coding Scheme DS Digital Signature GO Gateway Originated ID IDentifier KIc Key and algorithm Identifier for ciphering KID Key and

48、algorithm Identifier for RC/CC/DS M Mandatory MAC Message Authentication Code MSB Most Significant Bit O Optional PoR Proof of Receipt RC Redundancy Check RFU Reserved for Future Use SMS Short Message Service SMS-PP Short Message Service Point to Point SPI Security Parameters Indication TAR Toolkit

49、Application Reference TLV Tag Length Value UE User Equipment UI USAT Interpreter UIO USAT Interpreter Originated UI-TLV USAT Interpreter TLV URL Uniform Resource Locators USAT USIM Application Toolkit USIM Universal Subscriber Identity Module ETSI ETSI TS 131 114 V8.0.0 (2009-03) 9 3GPP TS 31.114 version 8.0.0 Release 8 3.3 Symbols 0 to 9 and A to F: The sixteen hexadecimal digits. Single bits are identified by b1 to b8, where b1 is the LSB and b8 is the MSB of the byte containing the bit. RFU bits and bytes are to be set to 0. 4 TLV Form