ETSI TS 131 120-2017 Universal Mobile Telecommunications System (UMTS) LTE UICC-terminal interface Physical electrical and logical test specification (V14 0 0 3GPP TS 31 120 versio.pdf

1、 ETSI TS 131 120 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; UICC-terminal interface; Physical, electrical and logical test specification (3GPP TS 31.120 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 131 120 V14.0.0 (2017-04)13GPP TS 31.120 version 14.

2、0.0 Release 14Reference RTS/TSGC-0631120ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 I

3、mportant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior writ

4、ten authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present documen

5、t should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of t

6、he following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of t

7、he PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of

8、ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Assoc

9、iation. ETSI ETSI TS 131 120 V14.0.0 (2017-04)23GPP TS 31.120 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ET

10、SI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/i

11、pr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential

12、 to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted

13、as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “wi

14、ll“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 131 120 V14.0.0 (2017-04)33GPP

15、 TS 31.120 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions, symbols, abbreviations and coding . 5g34 Physical Characteristic Tests 5g35 Electrical Characteristic Tests 5g

16、36 Initial Communication Tests 5g37 Transmission Protocol Tests 6g38 Application independent procedures 6g3Annex A (normative): UICC simulator functional requirement . 7g3Annex B (informative): Change history . 8g3History 9g3ETSI ETSI TS 131 120 V14.0.0 (2017-04)43GPP TS 31.120 version 14.0.0 Releas

17、e 14Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present documen

18、t, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control

19、. Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document defines the interface tests for the Termina

20、l / UICC interface. The aim of the present document is to ensure interoperability between an UICC and a Terminal independently of the respective manufacturer, card issuer or operator. Application specific tests for applications residing on an UICC are specified in document TS 31.121 2. ETSI ETSI TS

21、131 120 V14.0.0 (2017-04)53GPP TS 31.120 version 14.0.0 Release 141 Scope The present document specifies the interface test for the Terminal / UICC. The present document specifies the tests of: - physical characteristics of the UICC; - the electrical interface between the UICC and the Terminal; - th

22、e initial communication establishment and the transport protocols; - the application independent procedures. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by dat

23、e of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitl

24、y refers to the latest version of that document in the same Release as the present document. 1 ETSI TS 102 230 V7.0.0: “Smart cards; UICC-Terminal interface; Physical, electrical and logical test specification“. 2 3GPP TS 31.121: “UICC-terminal interface; USIM Application Test Specification“. 3 Defi

25、nitions, symbols, abbreviations and coding All definitions, symbols, abbreviations and coding conventions applicable to the terminal are specified in ETSI TS 102 230 1. 4 Physical Characteristic Tests All tests within the scope of this clause are specified in ETSI TS 102 230 1. 5 Electrical Characte

26、ristic Tests All tests within the scope of this clause are specified in ETSI TS 102 230 1. 6 Initial Communication Tests All tests within the scope of this clause are specified in ETSI TS 102 230 1. ETSI ETSI TS 131 120 V14.0.0 (2017-04)63GPP TS 31.120 version 14.0.0 Release 147 Transmission Protoco

27、l Tests All tests within the scope of this clause are specified in ETSI TS 102 230 1. 8 Application independent procedures All tests within the scope of this clause are specified in ETSI TS 102 230 1. ETSI ETSI TS 131 120 V14.0.0 (2017-04)73GPP TS 31.120 version 14.0.0 Release 14Annex A (normative):

28、 UICC simulator functional requirement All requirements within the scope of this clause are specified in ETSI TS 102 230 1. ETSI ETSI TS 131 120 V14.0.0 (2017-04)83GPP TS 31.120 version 14.0.0 Release 14Annex B (informative): Change history Change history Date TSG # TSG Doc CR Rev Cat Subject/Commen

29、t Old New 2000-12 TP-10 TP-000204 Final draft was approved at TSG-T #10 2.0.0 3.0.0 2004-12 TP-26 TP-040262 001 F Alignment to ETSI TS 102 230 3.0.0 3.1.0 2004-12 TP-26 Upgrade to Rel-6 5.0.0 6.0.0 2007-06 CT-36 - - - - Upgrade to Rel-7 (MCC) 6.0.0 7.0.0 2008-12 CT-42 - - - - Upgrade to Rel-8 + addi

30、tion of LTE logo 7.0.0 8.0.0 2009-12 CT-46 CP-091011 002 1 F References update 8.0.0 8.1.0 2009-12 CT-46 - - - - Upgrade of the specification to Rel-9 8.1.0 9.0.0 2011-03 SP-51 - - - - Upgrade of the specification to Rel-10 9.0.0 10.0.0 2012-09 SP-57 - - - - Upgrade of the specification to Rel-11 10

31、.0.0 11.0.0 2014-10 SP-65 - - - - Upgrade of the specification to Rel-12 11.0.0 12.0.0 2015-12 SP-70 - - - - Upgrade of the specification to Rel-13 12.0.0 13.0.0 2017-03 SA-75- - - - - Automatic upgrade to Rel-14 13.0.0 14.0.0 ETSI ETSI TS 131 120 V14.0.0 (2017-04)93GPP TS 31.120 version 14.0.0 Release 14History Document history V14.0.0 April 2017 Publication