ETSI TS 131 122-2017 Universal Mobile Telecommunications System (UMTS) LTE Universal Subscriber Identity Module (USIM) conformance test specification (V14 0 0 3GPP TS 31 122 versio.pdf

1、 ETSI TS 131 122 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Universal Subscriber Identity Module (USIM) conformance test specification (3GPP TS 31.122 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 131 122 V14.0.0 (2017-04)13GPP TS 31.122 version 14.0.

2、0 Release 14Reference RTS/TSGC-0631122ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Imp

3、ortant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior writte

4、n authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document

5、should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the

6、 following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the

7、 PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ET

8、SI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Associa

9、tion. ETSI ETSI TS 131 122 V14.0.0 (2017-04)23GPP TS 31.122 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI

10、 members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr

11、.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential t

12、o the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as

13、 being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will

14、“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 131 122 V14.0.0 (2017-04)33GPP T

15、S 31.122 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 15g31 Scope 16g32 Normative References 16g33 Definitions, symbols, abbreviations and coding . 17g33.1 Definitions 17g33.2 Symbols 17g33.3 Abbreviations . 17g33.4 Coding Conv

16、entions . 17g33.5 Applicability . 17g33.5.1 Applicability of the present document 17g33.5.2 Applicability to the UICC 17g33.5.3 Applicability of the individual tests 18g33.5.4 Applicability of conformance requirements . 18g33.6 Table of optional features . 19g33.7 Applicability table 21g34 Test envi

17、ronment 27g34.1 Test equipment . 27g34.1.1 ME simulator 27g34.1.2 Signal generation device . 27g34.1.2.1 Vcc 27g34.1.2.2 RST . 27g34.1.2.3 CLK. 27g34.1.2.4 I/O . 28g34.1.3 Precision force-inducing contacting device 28g34.1.4 Temperature controllable environment . 28g34.1.5 Temperature measuring devi

18、ce . 28g34.1.6 Voltage measuring device. 28g34.1.7 Precision measuring device. 28g34.1.8 Current measuring device . 28g34.1.9 Timing Measurements on contact I/O . 29g34.2 IUT default conditions 29g34.3 Default data formatting 29g34.4 Test definition and applicability . 29g34.5 Initial conditions . 3

19、0g34.6 Test procedure 31g34.7 Test requirement . 32g35 Void 32g36 Test Procedure (TS 102.221) 32g36.1 Physical characteristics . 33g36.1.1 ID-1 UICC 33g36.1.1.1 Definition and applicability . 33g36.1.1.2 Conformance requirement. 33g36.1.1.3 Test purpose 33g36.1.1.4 Method of test . 33g36.1.2 Plug-in

20、 UICC 33g36.1.2.1 Definition and applicability . 33g36.1.2.2 Conformance requirement. 33g36.1.2.3 Test purpose 34g36.1.2.4 Method of test . 34g3ETSI ETSI TS 131 122 V14.0.0 (2017-04)43GPP TS 31.122 version 14.0.0 Release 146.1.3 Temperature range for card operation . 34g36.1.3.1 Definition and appli

21、cability . 34g36.1.3.2 Conformance requirement. 34g36.1.3.3 Test purpose 34g36.1.3.4 Method of test . 34g36.1.4 Contacts 35g36.1.4.1 Definition and applicability . 35g36.1.4.2 Conformance requirement. 35g36.1.4.3 Test purpose 36g36.1.4.4 Method of test . 36g36.1.5 Mini-UICC 36g36.1.5.1 Definition an

22、d applicability . 36g36.1.5.2 Conformance requirement. 36g36.1.5.3 Test purpose 36g36.1.5.4 Method of test . 36g36.2 Electrical specifications of the UICC Terminal interface 37g36.2.1 Supply voltage Vcc (contact C1) 37g36.2.1.1 Voltage limits 37g36.2.1.1.1 Definition and applicability . 37g36.2.1.1.

23、2 Conformance requirement . 37g36.2.1.1.3 Test purpose 37g36.2.1.1.4 Method of test 37g36.2.1.2 Idle current limits 38g36.2.1.2.1 Definition and applicability . 38g36.2.1.2.2 Conformance requirement . 38g36.2.1.2.3 Test purpose 38g36.2.1.2.4 Method of test 38g36.2.1.3 Current limits in clk-stop-mode

24、 38g36.2.1.3.1 Definition and applicability . 38g36.2.1.3.2 Conformance requirement . 38g36.2.1.3.3 Test purpose 39g36.2.1.3.4 Method of test 39g36.2.2 Reset RST (contact C2) 39g36.2.2.1 Static operation . 39g36.2.2.1.1 Definition and applicability . 39g36.2.2.1.2 Conformance requirement . 39g36.2.2

25、.1.3 Test purpose 40g36.2.2.1.4 Method of test 40g36.2.3 Programming voltage Vpp (contact C6) . 40g36.2.3.1 Static operation . 40g36.2.3.1.1 Definition and applicability . 40g36.2.3.1.2 Conformance requirement . 40g36.2.3.1.3 Test purpose 41g36.2.3.1.4 Method of test 41g36.2.4 Clock CLK (contact C3)

26、 . 41g36.2.4.1 Frequency and duty cycle 41g36.2.4.1.1 Definition and applicability . 41g36.2.4.1.2 Conformance requirement . 41g36.2.4.1.3 Test purpose 42g36.2.4.1.4 Method of test 42g36.2.4.2 Voltage and current . 43g36.2.4.2.1 Definition and applicability . 43g36.2.4.2.2 Conformance requirement .

27、43g36.2.4.2.3 Test purpose 43g36.2.4.2.4 Method of test 43g36.2.5 I/O (contact C7) 44g36.2.5.1 Voltage and current . 44g36.2.5.1.1 Definition and applicability . 44g36.2.5.1.2 Conformance requirement . 44g36.2.5.1.3 Test purpose 45g36.2.5.1.4 Method of test 45g36.3 Initial communication establishmen

28、t procedure . 48g3ETSI ETSI TS 131 122 V14.0.0 (2017-04)53GPP TS 31.122 version 14.0.0 Release 146.3.1 Supply voltage switching 48g36.3.1.1 Supply voltage classes. 48g36.3.1.1.1 Definition and applicability . 48g36.3.1.1.2 Conformance requirement . 48g36.3.1.1.3 Test purpose 48g36.3.1.1.4 Method of

29、test 48g36.3.1.2 Power consumption of the UICC during ATR 48g36.3.1.2.1 Definition and applicability . 48g36.3.1.2.2 Conformance requirement . 48g36.3.1.2.3 Test purpose 48g36.3.1.2.4 Method of test 48g36.3.1.3 Application related electrical parameters 49g36.3.1.3.1 Definition and applicability . 49

30、g36.3.1.3.2 Conformance requirement . 49g36.3.1.3.3 Test purpose 49g36.3.1.3.4 Method of test 49g36.3.2 ATR content 50g36.3.2.1 Major capabilities 50g36.3.2.1.1 Definition and applicability . 50g36.3.2.1.2 Conformance requirement . 50g36.3.2.1.3 Test purpose 50g36.3.2.1.4 Method of test 51g36.3.2.2

31、Speed enhancement. 51g36.3.2.2.1 Definition and applicability . 51g36.3.2.2.2 Conformance requirement . 51g36.3.2.2.3 Test purpose 51g36.3.2.2.4 Method of test 51g36.3.2.3 Global Interface bytes . 52g36.3.2.3.1 Definition and applicability . 52g36.3.2.3.2 Conformance requirement . 52g36.3.2.3.3 Test

32、 purpose 52g36.3.2.3.4 Method of test 52g36.3.3 PPS procedure . 53g36.3.3.1 Definition and applicability . 53g36.3.3.2 Conformance requirement. 53g36.3.3.3 Test purpose 53g36.3.3.4 Method of test . 53g36.3.4 Reset procedures. 53g36.3.4.1 Definition and applicability . 53g36.3.4.2 Conformance require

33、ment. 54g36.3.4.3 Test purpose 54g36.3.4.4 Method of test . 54g36.3.5 Clock stop mode . 55g36.3.5.1 Definition and applicability . 55g36.3.5.2 Conformance requirement. 55g36.3.5.3 Test purpose 55g36.3.5.4 Method of test . 55g36.3.6 Bit/character duration and sampling time . 56g36.3.6.1 Definition an

34、d applicability . 56g36.3.6.2 Conformance requirement. 56g36.3.6.3 Test purpose 56g36.3.6.4 Method of test . 56g36.3.7 Error handling . 56g36.3.7.1 Definition and applicability . 56g36.3.7.2 Conformance requirement. 56g36.3.7.3 Test purpose 57g36.3.7.4 Method of test . 57g36.3.8 Compatibility 57g36.

35、3.8.1 Definition and applicability . 57g36.3.8.2 Conformance requirement. 57g36.3.8.3 Test purpose 57g36.3.8.4 Method of test . 57g3ETSI ETSI TS 131 122 V14.0.0 (2017-04)63GPP TS 31.122 version 14.0.0 Release 146.4 Transmission Protocols 58g36.4.1 Physical Layer 58g36.4.1.1 Definition and applicabil

36、ity . 58g36.4.1.2 Conformance requirement. 58g36.4.1.3 Test purpose 58g36.4.1.4 Method of test . 58g36.4.2 Data Link Layer 58g36.4.2.1 Character Frame 58g36.4.2.1.1 Definition and applicability . 58g36.4.2.1.2 Conformance requirement . 59g36.4.2.1.3 Test purpose 59g36.4.2.1.4 Method of test 59g36.4.

37、2.2 Transmission Protocol T = 0 . 62g36.4.2.2.1 Definition and applicability . 62g36.4.2.2.2 Conformance requirement . 63g36.4.2.2.3 Test purpose 63g36.4.2.2.4 Method of test 63g36.4.2.3 Transmission Protocol T = 1 . 64g36.4.2.3.1 Timing and specific options for blocks sent with T = 1 64g36.4.2.3.1.

38、1 Information field size . 65g36.4.2.3.1.1.1 Definition and applicability 65g36.4.2.3.1.1.2 Conformance requirement 65g36.4.2.3.1.1.3 Test purpose . 65g36.4.2.3.1.1.4 Method of test 65g36.4.2.3.1.2 Character waiting integer . 66g36.4.2.3.1.2.1 Definition and applicability 66g36.4.2.3.1.2.2 Conforman

39、ce requirement 66g36.4.2.3.1.2.3 Test purpose . 66g36.4.2.3.1.2.4 Method of test 66g36.4.2.3.1.3 Character waiting time . 66g36.4.2.3.1.3.1 Definition and applicability 66g36.4.2.3.1.3.2 Conformance requirement 66g36.4.2.3.1.3.3 Test purpose . 66g36.4.2.3.1.3.4 Method of test 66g36.4.2.3.1.4 Block g

40、uard time 67g36.4.2.3.1.4.1 Definition and applicability 67g36.4.2.3.1.4.2 Conformance requirement 67g36.4.2.3.1.4.3 Test purpose . 67g36.4.2.3.1.4.4 Method of test 67g36.4.2.3.1.5 Waiting time extension 67g36.4.2.3.1.5.1 Definition and applicability 67g36.4.2.3.1.5.2 Conformance requirement 67g36.4

41、.2.3.1.5.3 Test purpose . 67g36.4.2.3.1.5.4 Method of test 68g36.4.2.3.1.6 Error detection code. 68g36.4.2.3.1.6.1 Definition and applicability 68g36.4.2.3.1.6.2 Conformance requirement 68g36.4.2.3.1.6.3 Test purpose . 68g36.4.2.3.1.6.4 Method of test 68g36.4.2.3.2 Block frame structure 68g36.4.2.3.

42、2.1 Prologue field . 68g36.4.2.3.2.1.1 Node address byte 68g36.4.2.3.2.1.1.1 Definition and applicability 68g36.4.2.3.2.1.1.2 Conformance requirement 68g36.4.2.3.2.1.1.3 Test purpose . 68g36.4.2.3.2.1.1.4 Method of test 69g36.4.2.3.2.1.2 Protocol Control Byte . 69g36.4.2.3.2.1.2.1 Definition and app

43、licability 69g36.4.2.3.2.1.2.2 Conformance requirement 69g36.4.2.3.2.1.2.3 Test purpose . 69g36.4.2.3.2.1.2.4 Method of test 69g36.4.2.3.2.1.3 Length 70g3ETSI ETSI TS 131 122 V14.0.0 (2017-04)73GPP TS 31.122 version 14.0.0 Release 146.4.2.3.2.1.3.1 Definition and applicability 70g36.4.2.3.2.1.3.2 Co

44、nformance requirement 70g36.4.2.3.2.1.3.3 Test purpose . 70g36.4.2.3.2.1.3.4 Method of test 70g36.4.2.3.2.1.4 Information field 70g36.4.2.3.2.1.4.1 Definition and applicability 70g36.4.2.3.2.1.4.2 Conformance requirement 70g36.4.2.3.2.1.4.3 Test purpose . 70g36.4.2.3.2.1.4.4 Method of test 71g36.4.2

45、.3.2.2 Void . 72g36.4.2.3.2.3 Epilogue field . 72g36.4.2.3.2.3.1 Definition and applicability 72g36.4.2.3.2.3.2 Conformance requirement 72g36.4.2.3.2.3.3 Test purpose . 72g36.4.2.3.2.3.4 Method of test 72g36.4.2.3.3 Error free operation . 72g36.4.2.3.3.1 Definition and applicability . 72g36.4.2.3.3.

46、2 Conformance requirement . 72g36.4.2.3.3.3 Test purpose . 72g36.4.2.3.3.4 Method of test 73g36.4.2.3.4 Error Handling for T = 1 . 73g36.4.2.3.4.1 Protocol initialisation . 73g36.4.2.3.4.1.1 Definition and applicability 73g36.4.2.3.4.1.2 Conformance requirement 73g36.4.2.3.4.1.3 Test purpose . 73g36

47、.4.2.3.4.1.4 Method of test 73g36.4.2.3.4.2 Block dependant errors 74g36.4.2.3.4.2.1 Sending invalid blocks to the UICC . 74g36.4.2.3.4.2.1.1 Definition and applicability 74g36.4.2.3.4.2.1.2 Conformance requirement 74g36.4.2.3.4.2.1.3 Test purpose . 75g36.4.2.3.4.2.1.4 Method of test 75g36.4.2.3.5 C

48、haining 75g36.4.2.3.5.1 Definition and applicability . 75g36.4.2.3.5.2 Conformance requirement . 75g36.4.2.3.5.3 Test purpose . 76g36.4.2.3.5.4 Method of test 76g36.4.3 Transport Layer 76g36.4.3.1 Transportation of an APDU using T = 0 . 76g36.4.3.1.1 Case 1 77g36.4.3.1.1.1 Definition and applicabili

49、ty . 77g36.4.3.1.1.2 Conformance requirement . 77g36.4.3.1.1.3 Test purpose . 77g36.4.3.1.1.4 Method of test 77g36.4.3.1.2 Case 2 77g36.4.3.1.2.1 Definition and applicability . 77g36.4.3.1.2.2 Conformance requirement . 77g36.4.3.1.2.3 Test purpose . 77g36.4.3.1.2.4 Method of test 78g36.4.3.1.3 Case 3 78g36.4.3.1.3.1 Definition and applicability . 78g36.4.3.1.3.2 Conformance requirement . 78g36.4.3.1.3.3 Test purpose . 78g36.4.3.1.3.4 Method of test 78g36.4.3.1.4 Case 4 79g36.4.3.1.4.1 Definition and applicability . 79g36.4.3.1.4.2 Conformance requirement . 79g36.4.3.1.4.3 T