ETSI TS 132 102-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Architecture (V1.pdf

1、 ETSI TS 132 102 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Architecture (3GPP TS 32.102 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 132 102 V15.0.0 (2018-07)

2、13GPP TS 32.102 version 15.0.0 Release 15Reference RTS/TSGS-0532102vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfec

3、ture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be

4、modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretaria

5、t. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, pleas

6、e send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permi

7、ssion of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI register

8、ed for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI E

9、TSI TS 132 102 V15.0.0 (2018-07)23GPP TS 32.102 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available

10、for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (ht

11、tps:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, ess

12、ential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce

13、any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Proj

14、ect (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities ca

15、n be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms

16、for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132 102 V15.0.0 (2018-07)33GPP TS 32.102 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword

17、 . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g34 General . 11g34.1 PLMN Telecom Management 11g34.1.1 3GPP Reference Model 11g34.1.2 3GPP Provisioning Entities 11g34.1.3 Management Infrastructure of the PLMN . 11g34.2 TMN . 12g34.3 Mana

18、gement of Next Generation Networks . 12g35 General view of PLMN Management Physical architectures 13g36 Basic objectives for PLMN Management Physical Architecture . 14g37 TM Architectural aspects . 15g37.1 Architectural relationship . 15g37.2 Architectural constraints . 16g37.3 Interoperability . 17

19、g37.3.1 Introduction. 17g37.3.2 Interfaces. 17g37.3.3 Entities of a 3GPP system . 19g37.3.4 Open systems approach 21g37.3.5 Level of openness . 21g37.3.6 Closed interfaces. 21g37.4 Data communication networks . 22g37.5 New technologies . 23g38 3GPP Management Physical architectures . 24g38.1 Complia

20、nce Conditions 24g38.2 Network Element (NE) management architecture 25g38.3 Subnetwork Management Architecture 27g38.4 Operations Systems interoperability architecture . 28g38.5 Operations Systems intra-operability architecture 29g38.6 Enterprise management System interconnection architecture 30g39

21、TMN applications . 31g39.1 Management function blocks . 31g39.2 Management physical blocks . 32g39.3 IRP concept enabling TMN applications 33g310 Void 34g311 Implementation aspects 34g312 3GPP TMN Conformance 35g313 TMN planning and design considerations 36g313.1 Function attributes 36g313.2 Functio

22、nal characteristics . 36g313.3 Critical attributes 37g313.4 Protocol selection . 37g3ETSI ETSI TS 132 102 V15.0.0 (2018-07)43GPP TS 32.102 version 15.0.0 Release 1513.5 Communications considerations . 37g314 Mediation/Integration . 37g3Annex A (informative): Technology considerations 39g3A.1 Managem

23、ent physical blocks . 39g3A.1.1 Operations System (OS) . 39g3A.1.2 Void 39g3A.1.3 Void 39g3A.1.4 Void 39g3A.1.5 Void 39g3A.1.6 Void 39g3A.1.7 Void 39g3A.1.8 Network Element (NE) . 39g3A.1.9 Data Communication Network (DCN) . 40g3A.1.9.1 Transformation . 40g3A.1.9.1.1 Adaptation device . 40g3A.1.9.1.

24、2 Mediation device . 40g3A.1.9.2 Distributed multi-element structure 40g3A.1.10 Management logical layered architecture within the management physical view 40g3A.1.11 Interface concept 41g3A.2 Standard interfaces . 41g3Annex B (informative): Overview of a 3GPP System 43g3Annex C (informative): Chang

25、e history . 44g3History 45g3ETSI ETSI TS 132 102 V15.0.0 (2018-07)53GPP TS 32.102 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG

26、and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for informat

27、ion; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been inco

28、rporated in the document. ETSI ETSI TS 132 102 V15.0.0 (2018-07)63GPP TS 32.102 version 15.0.0 Release 151 Scope The present document identifies and standardises the most important and strategic contexts in the physical architecture for the management of PLMNs. It serves as a framework to help defin

29、e a telecom management physical architecture for a planned PLMN and to adopt standards and provide products that are easy to integrate. The requirements identified in the present document are applicable to all further development of 3GPP Telecom Management specifications as well as the development o

30、f PLMN Management products. The present document can be seen as guidance for the development of all other Technical Specification addressing the management of PLMNs, except TS 32.101 2. 2 References The following documents contain provisions which, through reference in this text, constitute provisio

31、ns of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a referenc

32、e to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 ITU-T Recommendation M.3010 (2000): “Principles for a Telecommunications management network“. 2 3GPP TS 32.101: “Telecommu

33、nication management; Principles and high level requirements“. 3 Void. 4 ITU-T Recommendation X.200 (1994): “Information technology - Open Systems Interconnection - Basic Reference Model: The basic model“. 5 3GPP TS 32.150: “Telecommunication management; Integration Reference Point (IRP) Concept and

34、definitions“. 6 Void. 7 Void. 8 Void. 9 TMF GB910: “Smart TMN Telecom Operations Map (Release 2.1)“. http:/www.tmforum.org 10 TMF GB909: “Smart TMN Technology Integration Map (Issue 1.1)“. http:/www.tmforum.org 11 ITU-T Recommendation M.3013 (2000): “Considerations for a telecommunications managemen

35、t network“. 12 3GPP TS 23.002: “Network architecture“. 13 3GPP TS 23.101: “General UMTS Architecture“. 14 3GPP TS 32.111-x: “Telecommunication management; Fault Management;“. 15 OMG: “Unified Modelling Language Specification, Version 1.4, September 2001“. http:/www.omg.org/technology/documents/forma

36、l/uml.htm 16 ITU-T Recommendation M.3060/Y.2401 (2006): “ Principles for the Management of Next Generation Networks“ . ETSI ETSI TS 132 102 V15.0.0 (2018-07)73GPP TS 32.102 version 15.0.0 Release 1517 ETSI TS 188 001 V1.2.1 TISPAN; “NGN management; Operations Support Systems Architecture“. 18 ITU-T

37、Recommendation Y.2011 (2004), “General principles and general reference model for Next Generation Networks“. 19 ITU-T Recommendation Y.2001 (2004), “General overview of NGN“. 20 ITU-T M.3050.x series (2004),“TMN Enhanced Telecom Operations Map (eTOM)“. 3 Definitions and abbreviations 3.1 Definitions

38、 For the purposes of the present document, the following definitions apply: architecture: organisational structure of a system or component, their relationships, and the principles and guidelines governing their design and evolution over time closed interfaces: privately controlled system/subsystem

39、boundary descriptions that are not disclosed to the public or are unique to a single supplier de facto standard: standard that is widely accepted and used but that lacks formal approval by a recognised standards organisation Information Service (IS): Defined in 3GPP TS 32.150 5.interface standard: s

40、tandard that specifies the physical or functional interface characteristics of systems, subsystems, equipment, assemblies, components, items or parts to permit interchangeability, interconnection, interoperability, compatibility, or communications interoperability: ability of two or more systems or

41、components to exchange data and use information intra-operability: ability to interchange and use information, functions and services among components within a system Integration Reference Point (IRP): Defined in 3GPP TS 32.150 5. Managed Object: Defined in 3GPP TS 32.150 5. management infrastructur

42、e: Defined in TS 32.101 2. market acceptance: means that an item has been accepted in the market as evidenced by annual sales, length of time available for sale, and after-sale support capability. modular: pertaining to the design concept in which interchangeable units are employed to create a funct

43、ional end product. module: interchangeable item that contains components. In computer programming, a program unit that is discrete and identifiable with respect to compiling, combining with other modules, and loading is called a module. Network Resource Model (NRM): Defined in 3GPP TS 32.150 5. Next

44、 Generation Networks Management (NGNM): Planning, provisioning, installation, maintenance, operation and administration of next generation telecommunications equipment for transmission or control of resources and services within NGN transport and service strata. NGNM is defined by ITU-T 16. NGN serv

45、ice stratum: that part of the NGN which provides the user functions that transfer service-related data and the functions that control and manage service resources and network services to enable user services and applications. NGN transport stratum: that part of the NGN which provides the user functi

46、ons that transfer data and the functions that control and manage transport resources to carry such data between terminating entities. open specifications: public specifications that are maintained by an open, public consensus process to accommodate new technologies over time and that are consistent

47、with international standards open standards: widely accepted and supported standards set by recognised standards organisation or the commercial market place. These standards support interoperability, portability, and scalability and are equally available to the general public at no cost or with a mo

48、derate license fee. ETSI ETSI TS 132 102 V15.0.0 (2018-07)83GPP TS 32.102 version 15.0.0 Release 15open systems strategy: focuses on fielding superior telecom capability more quickly and more affordably by using multiple suppliers and commercially supported practices, products, specifications, and s

49、tandards, which are selected based on performance, cost, industry acceptance, long term availability and supportability, and upgrade potential. physical architecture: minimal set of rules governing the arrangement, interaction, and interdependence of the parts or elements whose purpose is to ensure that a conformant system satisfies a specified set of requirements. The physical architecture identifies the services, interfaces, standards, and their relationships. It provides the technical guidelines for implementation of