ETSI TS 132 111-4-2005 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Telecommunication management Fault Management Part 4 _1.pdf

1、 ETSI TS 132 111-4 V6.5.0 (2005-06)Technical Specification Digital cellular telecommunications system (Phase 2+);Universal Mobile Telecommunications System (UMTS);Telecommunication management;Fault Management;Part 4: Alarm Integration Reference Point (IRP):Common Management Information Protocol (CMI

2、P)Solution Set (SS)(3GPP TS 32.111-4 version 6.5.0 Release 6)GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 132 111-4 V6.5.0 (2005-06) 1 3GPP TS 32.111-4 version 6.5.0 Release 6 Reference RTS/TSGS-0532111-4v650 Keywords GSM, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRA

3、NCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may b

4、e made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF versio

5、n kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If

6、 you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to repr

7、oduction in all media. European Telecommunications Standards Institute 2005. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Me

8、mbers. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 132 111-4 V6.5.0 (2005-06) 2 3GPP TS 32.111-4 version 6.5.0 Release 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may

9、 have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI st

10、andards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of

11、other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by the ETSI 3rdGeneration Partnership Project (3GPP). The present document may ref

12、er to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/k

13、ey/queryform.asp . ETSI ETSI TS 132 111-4 V6.5.0 (2005-06) 3 3GPP TS 32.111-4 version 6.5.0 Release 6 Contents Intellectual Property Rights2 Foreword.2 Foreword.5 Introduction 5 1 Scope 6 2 References 6 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .7 4 Basic aspects 7 4.1 Arc

14、hitectural aspects 7 4.1.1 Reporting new alarms .8 4.1.2 Reporting changed alarms 8 4.1.3 Reporting cleared alarms 8 4.1.4 Acknowledgment of alarms 8 4.1.5 Management of comments associated to alarms.8 4.1.6 Alignment of alarm conditions over the Itf-N.8 4.2 Mapping .12 4.2.1 Mapping of Information

15、Object Classes .12 4.2.2 Mapping of Operations .12 4.2.3 Mapping of Operation Parameters 13 4.2.4 Mapping of Notifications16 4.2.5 Mapping of Notification Parameters.17 - 5 GDMO Definitions 22 - 5.1 Managed Object Classes 22 - 5.1.1 alarmControl.22 - 5.2 Packages.22 - 5.2.1 alarmControlBasicPackage.

16、22 - 5.2.2 alarmCountPackage 23 - 5.2.3 alarmAcknowledgementPackage23 - 5.2.4 alarmUnacknowledgementPackage 24 - 5.2.5 alarmCommentPackage 25 - 5.2.6 alarmIRPVersionPackage .26 - 5.2.7 alarmProfilePackage .26 - 5.2.8 alarmPotentialFaultyAlarmListPackage .27 - 5.2.9 alarmClearPackage .27 - 5.2.10 x72

17、1AlarmNotificationsPackage 28 - 5.3 Actions .28 - 5.3.1 acknowledgeAlarms (M) 28 - 5.3.2 getAlarmCount (O).29 - 5.3.3 getAlarmList (M)30 - 5.3.4 setComment (O)32 - 5.3.5 getAlarmIRPVersion (M) .33 - 5.3.6 getAlarmIRPNotificationProfile (O) 34 - 5.3.7 getAlarmIRPOperationProfile (O)35 - 5.3.8 unackno

18、wledgeAlarms (O) .35 - 5.3.9 clearAlarms (O) 37 - 5.3.10 abortGetAlarmList (M).38 - 5.4 Notifications .38 - 5.4.1 notifyAlarmListRebuilt (M)38 - 5.4.2 notifyPotentialFaultyAlarmList (O)39 - 5.4.3 notifyAlarmAlignmentEnd (M)40 ETSI ETSI TS 132 111-4 V6.5.0 (2005-06) 4 3GPP TS 32.111-4 version 6.5.0 R

19、elease 6 - 5.5 Attributes41 - 5.5.1 alarmControlId41 - 5.5.2 alarmsCountSummary 41 - 5.5.3 supportedAlarmIRPVersions 42 - 5.5.4 rebuiltObjectClass.42 - 5.5.5 rebuiltObjectInstance 43 - 5.5.6 potentialFaultyObjectClass.43 - 5.5.7 potentialFaultyObjectInstance 44 - 5.5.8 alignmentId.44 - 5.5.9 alarmAl

20、ignmentEndStatus 44 - 5.6 Parameters 45 - 5.6.1 ackStateParameter.45 - 5.6.2 ackSystemIdParameter45 - 5.6.3 ackTimeParameter 46 - 5.6.4 ackUserIdParameter46 - 5.6.5 clearUserIdParameter47 - 5.6.6 clearSystemIdParameter .47 - 5.6.7 commentsParameter48 - 5.6.8 alarmRaisedTimeParameter48 - 5.6.9 alarmC

21、learedTimeParameter 49 6 ASN.1 definitions for Alarm IRP.50 Annex A (informative): List of assigned Object Identifiers60 Annex B (informative): Change history .62 History 63 ETSI ETSI TS 132 111-4 V6.5.0 (2005-06) 5 3GPP TS 32.111-4 version 6.5.0 Release 6 Foreword This Technical Specification (TS)

22、has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an id

23、entifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all cha

24、nges of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project: Technical Specifica

25、tion Group Services and System Aspects; Telecommunication management; as identified below: 32.111-1 “Fault Management; Part 1: 3G fault management requirements“. 32.111-2 “Fault Management; Part 2: Alarm Integration Reference Point (IRP): Information Service (IS)“. 32.111-3 “Fault Management; Part 3

26、: Alarm Integration Reference Point (IRP): Common Object Request Broker Architecture (CORBA) Solution Set (SS)“. 32.111-4 “Fault Management; Part 4: Alarm Integration Reference Point (IRP): Common Management Information Protocol (CMIP) Solution Set (SS)“. 32.111-5 “Fault Management; Part 5: Alarm In

27、tegration Reference Point (IRP): eXtensible Markup Language (XML) definitions“. ETSI ETSI TS 132 111-4 V6.5.0 (2005-06) 6 3GPP TS 32.111-4 version 6.5.0 Release 6 1 Scope The present document defines the alarm integration reference point for the CMIP solution set. In detail: - clause 4 contains an i

28、ntroduction to some basic concepts of the CMIP interfaces; - clause 5 contains the GDMO definitions for the Alarm Management over the CMIP interfaces; - clause 6 contains the ASN.1 definitions supporting the GDMO definitions provided in clause 5. This Solution Set specification is related to 3GPP TS

29、 32.111-2 (V6.3.X). 2 References The following documents contain provisions, which through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific r

30、eference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present docume

31、nt. 1 3GPP TS 32.302: “Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IRP): Information Service (IS)“. 2 ITU-T Recommendation X.710: “Information technology - Open Systems Interconnection - Common Management Information Service“. 3 ITU-T Recomm

32、endation X.711: “Information technology - Open Systems Interconnection - Common Management Information Protocol: Specification“. 4 ITU-T Recommendation X.721: “Information technology - Open Systems Interconnection - Structure of management information: Definition of management information“. 5 ITU-T

33、Recommendation X.733: “Information technology - Open Systems Interconnection - Systems Management: Alarm reporting function“. 6 ITU-T Recommendation X.734: “Information technology - Open Systems Interconnection - Systems Management: Event report management function“. 7 ITU-T Recommendation Q.821: “S

34、tage 2 and Stage 3 description for the Q3 interface - Alarm Surveillance“. 8 3GPP TS 32.111-1: “Telecommunication management; Fault Management; Part 1: 3G fault management requirements“. 9 3GPP TS 32.111-2: “Telecommunication management; Fault Management; Part 2: Alarm Integration Reference Point (I

35、RP): Information Service (IS)“. 10 3GPP TS 32.304: “Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IRP): Common Management Information Protocol (CMIP) Solution Set (SS)“. 11 3GPP TS 32.312: “Telecommunication management; Generic Integration Ref

36、erence Point (IRP) management; Information Service (IS)“. 12 ITU-T Recommendation X.736: “Information technology - Open Systems Interconnection - Systems Management: Security alarm reporting function“. ETSI ETSI TS 132 111-4 V6.5.0 (2005-06) 7 3GPP TS 32.111-4 version 6.5.0 Release 6 3 Definitions a

37、nd abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions defined in 3GPP TS 32.111-1 8 apply. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ASN.1 Abstract Syntax Notation number 1 CCITT The International Tel

38、egraph and Telephone Consultative Committee CM Configuration Management CMIP Common Management Information Protocol CMIS Common Management Information Service CMISE Common Management Information Service Element EFD Event Forwarding Discriminator EM Element Manager FTAM File Transfer Access and Manag

39、ement GDMO Guidelines for the Definition of Managed Objects IOC Information Object Class IRP Integration Reference Point Itf-N Interface N (between NM and EM/NE) ITU-T International Telecommunication Union - Telecommunications M Mandatory MOC Managed Object Class MOI Managed Object Instance NE Netwo

40、rk Element NM Network Manager NMC Network Management Centre O Optional OS Operations System TMN Telecommunications Management Network 4 Basic aspects The present document provides all the GDMO and ASN.1 definitions necessary to implement the Alarm IRP Information Service (3GPP TS 32.111-2 9) for the

41、 CMIP interface. 4.1 Architectural aspects The Alarm IRP Information Service description is based on Information Object Classes (IOC), Relationships among IOC and Interfaces (used or implemented by IOC) which include Operations and/or Notifications. In the present document, for the CMIP interfaces t

42、he IOC are modelled as GDMO “Managed Object Classes“ (MOC) defined specifically for alarm management, the Operations are modelled as GDMO “Actions“ of a MOC while the Notifications are modelled as GDMO “Notifications“ included in MOCs that need to report events to the Manager. In more detail, the No

43、tifications related to alarm management are included in a MOC defined in the present document while the Notifications defined for alarm reporting are not included in any MOC defined in the present document. They will be included in other MOCs defined in other CMIP Solution Set or in other CMIP Infor

44、mation Models. Regarding the Notifications, the present document is based on the Notification IRP CMIP Solution Set (3GPP TS 32.304 10). ETSI ETSI TS 132 111-4 V6.5.0 (2005-06) 8 3GPP TS 32.111-4 version 6.5.0 Release 6 4.1.1 Reporting new alarms In case of an alarm occurrence the Agent notifies all

45、 subscribed Managers that a new alarm has occurred and has been added into the alarm list of the Agent. For this purpose the standardised alarm notifications defined in ITU-T Recommendations X.721 4, X.733 5 and X.736 12 are used. 4.1.2 Reporting changed alarms Although in the Alarm IRP Information

46、Service (3GPP TS 32.111-2 9) there is a notification specifically defined to report the event of alarm attribute changes, on the CMIP interfaces such events are reported according to ITU-T Recommendations X.721 4, X.733 5 and X.736 12, i.e. the original alarm is first cleared (by means of a clear al

47、arm notification) and then a new alarm notification with the changed parameter values is generated by the Agent. 4.1.3 Reporting cleared alarms On the CMIP interfaces the clearing of alarms is reported by the Agent to the Managers in accordance with the mechanisms defined in ITU-T Recommendation X.7

48、33 5, X.736 12 and ITU-T Recommendation Q.821 7. 4.1.4 Acknowledgment of alarms This clause relates to the co-operative alarm acknowledgment managed on Itf-N, which implies that the acknowledgment of alarms can be done on both NM and EM. The acknowledgment of alarms is managed by means of the MOC al

49、armControl, which includes: - one action to acknowledge alarms (acknowledgeAlarms); - one action to unacknowledge alarms (unacknowledgeAlarms); - ITU-T Recommendation X.721 4 compliant alarm notifications to inform Managers about changes of acknowledgment state. In case an alarm is acknowledged by an operator or automatically by a management system, the ackUserId, ackSystemId, ackState and ackTime information is stored in the additionalInformation field of the alarm prese