ETSI TS 132 300-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Ma.pdf

1、 ETSI TS 132 300 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Configuration Management (CM); Name convention for Managed Objects (3GPP TS 32.300 version 14.0.0 Release 14) TECHNICA

2、L SPECIFICATION ETSI ETSI TS 132 300 V14.0.0 (2017-04)13GPP TS 32.300 version 14.0.0 Release 14Reference RTS/TSGS-0532300ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C

3、 Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/o

4、r print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version k

5、ept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.

6、aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopyi

7、ng and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017.

8、All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of i

9、ts Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 132 300 V14.0.0 (2017-04)23GPP TS 32.300 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The

10、 information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available fro

11、m the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (

12、or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using t

13、heir 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the

14、present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI delivera

15、bles except when used in direct citation. ETSI ETSI TS 132 300 V14.0.0 (2017-04)33GPP TS 32.300 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 7g32 References 7g33 Definitions and abbreviations . 8g33.1

16、 Definitions 8g33.1.1 Void 8g33.1.2 Void 8g33.1.3 Managed Object and Network Resource 8g33.1.4 Name . 8g33.1.5 Name space . 8g33.1.6 Global Root and Local Root . 9g33.1.7 Distinguished Name and Relative Distinguished Name . 9g33.2 Abbreviations . 9g34 System overview 10g34.1 System context . 10g35 N

17、ame Convention for Managed Objects 10g36 Representations of Distinguished Name (DN) . 11g37 String Representation of DN 12g37.A Overview 12g37.B Allowed character sets 12g37.1 Converting DN from ASN.1 to String 12g37.1.1 Rule for one-string DN . 12g37.1.1.1 Converting RDNSequence . 12g37.1.1.2 Conve

18、rting RelativeDistinguishedName . 13g37.1.1.3 Converting AttributeTypeAndValue . 13g37.1.2 Rule for multi-string DN . 13g37.1.2.1 Converting RDNSequence . 13g37.1.2.2 Converting RelativeDistinguishedName 13g37.1.2.3 Converting AttributeTypeAndValue 13g37.2 Character syntax . 14g37.3 EBNF of DN Strin

19、g Representation . 14g37.4 Maximum size of DN string . 17g38 Examples of DN in string representation . 18g39 Usage Scenario . 19g39.1 DN prefix usage . 19g3Annex A (normative): Mapping of RDN AttributeType to Strings 20g3Annex B (normative): Rule for MO Designers regarding AttributeType interpretati

20、on . 21g3Annex C (informative): DN Prefix and Local Distinguished Name (LDN) . 23g3Annex D (informative): Interpreting EBNF 13 . 25g3Annex E (informative): IOC/MOC name recommendation . 27g3ETSI ETSI TS 132 300 V14.0.0 (2017-04)43GPP TS 32.300 version 14.0.0 Release 14Annex F (informative): Change h

21、istory . 28g3History 29g3ETSI ETSI TS 132 300 V14.0.0 (2017-04)53GPP TS 32.300 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may

22、change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 p

23、resented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated

24、 in the document. Introduction Configuration Management (CM), in general, provides the operator with the ability to assure correct and effective operation of the 3G network as it evolves. CM actions have the objective to control and monitor the actual configuration on the Network Elements (NEs) and

25、Network Resources (NRs), and they may be initiated by the operator or by functions in the Operations Systems (OSs) or NEs. CM actions may be requested as part of an implementation programme (e.g. additions and deletions), as part of an optimisation programme (e.g. modifications), and to maintain the

26、 overall Quality of Service (QoS). The CM actions are initiated either as single actions on single NEs of the 3G network, or as part of a complex procedure involving actions on many resources/objects in one or several NEs. Background Traditionally, multiple name conventions have been used by differe

27、nt vendors NEs, or even within the same vendor, to name network resources. The following problems have thus arisen: - Different classes of NE have used different name conventions. Network Management applications, when interfacing with these NEs, have been required to understand multiple name convent

28、ions to manage the NEs. - Network management applications (e.g. Fault Management application), when interfacing with other applications (e.g. Configuration Management application, trouble ticket system) have been required to understand multiple name conventions. - When a customer purchased multiple

29、classes of NEs from the same or different vendors, the customer was confronted with multiple name conventions. - Without a name convention, it is difficult to integrate IRP conformant vendors resource name space (see subclause 3.1.5 for definition of name space) into the customers Enterprise name sp

30、ace. Benefits The benefits of using the subject name convention to name 3G network resources for network management purposes are as follows: - A resource name is guaranteed to be unambiguous in that it refers to, at most, one network resource. Unambiguous naming of managed network resources is neces

31、sary for interoperability among managing applications and systems. ETSI ETSI TS 132 300 V14.0.0 (2017-04)63GPP TS 32.300 version 14.0.0 Release 14- The resource name syntax is specified such that management applications can be designed with assurance that its name-parsing algorithm needs not be modi

32、fied in the future. We can derive this benefit only if the subject name convention is widely accepted. The root and upper portions of the name hierarchy are based on name infrastructure of Domain Name System (DNS) (see IETF RFC 2247 5). The subject name convention can naturally fit in DNS and can in

33、tegrate well with other hierarchical naming systems, such as ITU-T Recommendation X.500 2. ETSI ETSI TS 132 300 V14.0.0 (2017-04)73GPP TS 32.300 version 14.0.0 Release 141 Scope A more detailed background and introduction of the IRP concept is given in 3GPP TS 32.150 16. To perform network managemen

34、t tasks, co-operating applications require identical interpretation of names assigned to network resources under management. Such names are required to be unambiguous as well. The present document recommends one name convention for network resources under management in the IRP context. To facilitate

35、 integration of network management information obtained via multiple IRPs based on different IRP Solution Set technologies, identical network resource name semantics shall be conveyed in all IRPs. The present document specifies one such name convention. The present document also specifies an IOC/MOC

36、 name recommendation (see annex E) in order to avoid potential problems with valid characters in some programming languages. In this document, the name convention and name recommendation (see annex E) are specified for MO instances whose MO class stereotype is IOC. These specifications are also for

37、MO instances whose MO class stereotype is Support IOC (SupportIOC). 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, versi

38、on number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of t

39、hat document in the same Release as the present document. 1 Void. 2 ITU-T Recommendation X.500 (1993): “Information technology - Open Systems Interconnection - The Directory: Overview of concepts, models and services“. 3 T. Howes, ISBN 1-57870-070-1: “Understanding and Deploying LDAP Directory Servi

40、ces“. 4 IETF RFC 1737 (1994): “Functional Requirements for Uniform Resource Names“. 5 IETF RFC 2247 (1998): “Using Domains in LDAP/X.500 Distinguished Names“. 6 IETF RFC 1035 (1987): “Domain names - implementation and specification“. 7 IETF RFC 2253 (1997): “Lightweight Directory Access Protocol (v3

41、): UTF-8 String Representation of Distinguished Names“. 8 3GPP TS 32.111-2: “Telecommunication management; Fault Management; Part 2: Alarm Integration Reference Point (IRP): Information Service (IS)“. 9 3GPP TS 32.622: “ Telecommunication management; Configuration Management (CM); Generic network re

42、sources Integration Reference Point (IRP): Network Resource Model (NRM)“. 10 Void. 11 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 12 3GPP TS 32.102: “Telecommunication management; Architecture“. ETSI ETSI TS 132 300 V14.0.0 (2017-04)83GPP TS 32.300 version

43、 14.0.0 Release 1413 ISO/IEC 14977: “Information technology Syntactic metalanguage Extended BNF“. 14 ISO/IEC 646: “Information technology ISO 7-bit coded character set for information interchange“. 15 ISO/IEC 10646: “Information technology Universal multiple-octet Coded Character Set (UCS)“. 16 3GPP

44、 TS 32.150: “Integration Reference Point (IRP) Concept and definitions“. 17 3GPP2 S.S0028-E “OAM, U+003B), - reverse solidus character (, U+005C), - quotation mark character (“, U+0022). 2. The full stop character (., U+002E). This character may be used in the AttributeValue whose AttributeType is “

45、DC“. An example is “DC=marketing.CompanyXYZ.com“. This full stop character shall not be used in AttributeType. 3. The asterisk character (*, U+002A) is reserved to denote wildcard. Wildcard can be used as input to search or filter capabilities based on DN. For example, a client is not sure of the ex

46、act spelling of the AttributeValue (see clause 7.3), the client can use wildcard to represent one or more characters which are legal in that field. The asterisk character shall not be used in DN. 7.3 EBNF of DN String Representation The formal definitions provided within this subclause consolidate s

47、everal rules and concepts (null distinguished name, DN prefix, local DN, domain component type, class names starting with upper case characters, attribute names starting with lower case characters, classes with or without an “Id“ naming attribute, attribute type and attribute value allowed character

48、s, wildcard character). The following is the EBNF for DN in string representation (Extended Backus-Naur Form; see ISO/IEC 14977 13 for more information): DistinguishedName =NullDN| RegularDN ; (*See size consideration in subclause 7.4 *) NullDN = ; (* empty string; null DN is specified in subclause

49、7.1.1 *) RegularDN = DNPrefixPlusRDNSeparator (* DN prefix and local DN *) , LocalDN ; (* are defined in annex C *) DNPrefixPlusRDNSeparator = ( NullDNPrefix , NullRDNSeparator ) | ( DNPrefixWithDomainComponent , RDNSeparator ) | ( DNPrefixWithoutDomainComponent , RDNSeparator ) ; ETSI ETSI TS 132 300 V14.0.0 (2017-04)153GPP TS 32.300 version 14.0.0 Release 14NullDNPrefix = ; (* empty string *) NullRDNSeparator = ; (* empty string *) DNPrefixWithDomainCom