ETSI TS 132 436-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Performance measuremen.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelTelecommPerformAbstract Syntax Nota(3GPP TS 32.4TECHNICAL SPECIFICATION132 436 V13.0.0 (2016communications system (Phaelecommunications System (LTE; munication management; ormance measurement: otation 1 (ASN.1) file format de.436 version 13.0.0 Re

2、lease 1316-02) hase 2+); (UMTS); definition 13) ETSI ETSI TS 132 436 V13.0.0 (2016-02)13GPP TS 32.436 version 13.0.0 Release 13Reference RTS/TSGS-0532436vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret

3、 N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The

4、 content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable

5、 Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.ets

6、i.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical

7、, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Stan

8、dards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo ar

9、e Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 132 436 V13.0.0 (2016-02)23GPP TS 32.436 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these e

10、ssential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest upd

11、ates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web ser

12、ver) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identit

13、ies or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall n

14、ot“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct ci

15、tation. ETSI ETSI TS 132 436 V13.0.0 (2016-02)33GPP TS 32.436 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations

16、. 6g34 Mapping . 6g35 ASN.1 file format definition 7g3Annex A (informative): Example of ASN.1 Measurement Report File . 9g3Annex B (informative): Change history . 10g3History 11g3ETSI ETSI TS 132 436 V13.0.0 (2016-02)43GPP TS 32.436 version 13.0.0 Release 13Foreword This Technical Specification has

17、been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identi

18、fying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes

19、 of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project: Technical Specification

20、 Group Services and System Aspects; Telecommunication management, as identified below: TS 32.432: “Performance measurement; File format definition“; TS 32.435: “Performance measurement; eXtensible Markup Language (XML) file format definition“; TS 32.436: “Performance measurement; Abstract Syntax Not

21、ation 1 (ASN.1) file format definition“. The present document is part of a set of specifications, which describe the requirements and information model necessary for the standardised Operation, Administration and Maintenance (OA Principles and high level requirements“. 2 3GPP TS 32.102: “Telecommuni

22、cation management; Architecture“. 3 3GPP TS 32.401: “Telecommunication management; Performance Management (PM); Concept and requirements“. 4 3GPP TS 32.600: “Telecommunication management; Configuration Management (CM); Concept and high-level requirements“. 5 3GPP TS 32.432: “Performance Measurement:

23、 File format definition“. 6 ITU-T Recommendation X.680: “Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: network Element

24、 Manager (EM): provides a package of end-user functions for management of a set of closely related types of Network Elements. These functions can be divided into two main categories: - Element Management Functions for management of Network Elements on an individual basis. These are basically the sam

25、e functions as supported by the corresponding local terminals. - Sub-Network Management Functions that are related to a network model for a set of Network Elements constituting a clearly defined sub-network, which may include relations between the Network Elements. This model enables additional func

26、tions on the sub-network level (typically in the areas of network topology presentation, alarm correlation, service impact analysis and circuit provisioning). Network Manager (NM): provides a package of end-user functions with the responsibility for the management of a network, mainly as supported b

27、y the EM(s) but it may also involve direct access to the Network Elements. All communication with the network is based on open and well-standardised interfaces supporting management of multi-vendor and multi-technology Network Elements. Operations System (OS): generic management system, independent

28、of its location level within the management hierarchy. ETSI ETSI TS 132 436 V13.0.0 (2016-02)63GPP TS 32.436 version 13.0.0 Release 133.2 Abbreviations For the purposes of the present document, the following abbreviations apply: 3G 3rdGeneration ASN.1 Abstract Syntax Notation 1 BER Basic Encoding Ru

29、les EM Element ManagerGSM Global System for Mobile communications IRP Integration Reference Point NE Network Element NM Network ManagerPM Performance Management 4 Mapping Table 4.1 maps the file content items in the 3GPP TS 32.432 5 to those used in the ASN.1 (see 6) file format definitions. Table 4

30、.1 Mapping of File Content Items to ASN.1 types File Content Item ASN.1 Type Description measDataCollection MeasDataCollection measFileHeader MeasFileHeader measData MeasData measFileFooter MeasFileFooter fileFormatVersion FileFormatVersion senderName SenderName For ASN.1 format, the string may be e

31、mpty (i.e. string size =0) in case the DN is not configured in the sender. senderType SenderType vendorName VendorName collectionBeginTime CollectionBeginTime neId NEId neUserName NEUserName neDistinguishedName NEDistinguishedName neSoftwareVersion NESoftwareVersion measInfo MeasInfo measInfoId easI

32、nfoId measTimeStamp MeasTimeStamp jobId JobIdgranularityPeriod GranularityPeriod reportingPeriod ReportingPeriodmeasTypes MeasTypes measValues MeasValues measObjInstId MeasObjInstId measResults MeasResults suspectFlag SuspectFlag timeStamp TimeStamp ASN.1 GeneralizedTime format. ETSI ETSI TS 132 436

33、 V13.0.0 (2016-02)73GPP TS 32.436 version 13.0.0 Release 135 ASN.1 file format definition The ASN.1 file format definitions implement the measurement result structure and parameters defined in clauses 5.2 and 5.3 of 3GPP TS 32.401 3. For ASN.1 formatted files, BER encoding rules shall apply. Embedde

34、d comments are integral parts of the standard format; i.e. any implementation-claiming conformance to this annex shall also conform to the comments. PM-File-Description DEFINITIONS AUTOMATIC TAGS:= BEGIN MeasDataCollection:= SEQUENCE measFileHeader MeasFileHeader, measData SEQUENCE OF MeasData, meas

35、FileFooter MeasFileFooter MeasFileHeader:= SEQUENCE fileFormatVersion PrintableString (SIZE (015), senderName PrintableString (SIZE (0400), senderType SenderType, vendorName PrintableString (SIZE (032), collectionBeginTime TimeStamp, . - The sole purpose of the ellipsis notation used in the file hea

36、der is to facilitate inter-release compatibility, vendor specific additions are not allowed in implementations claiming conformance to the TS. However, it is acknowledged that this feature does enable the use of non-standard extensions to the file header without loosing compatibility to the file for

37、mat specified in the present document. SenderType:= PrintableString (SIZE (08) TimeStamp:= GeneralizedTime MeasData:= SEQUENCE nEId NEId, measInfo SEQUENCE OF MeasInfo NEId:= SEQUENCE nEUserName PrintableString (SIZE (064), nEDistinguishedName PrintableString (SIZE (0400), nESoftwareVersion Printabl

38、eString (SIZE (064) OPTIONAL MeasInfo:= SEQUENCE measTimeStamp TimeStamp, granularityPeriod INTEGER, measTypes SEQUENCE OF MeasType, measValues SEQUENCE OF MeasValue reportingPeriod INTEGER OPTIONAL, jobId INTEGER OPTIONAL, measInfoId PrintableString (SIZE (064) OPTIONAL, MeasType:= PrintableString

39、(SIZE (164) MeasValue:= SEQUENCE measObjInstId MeasObjInstId, measResults SEQUENCE OF MeasResult, suspectFlag BOOLEAN DEFAULT FALSE MeasObjInstId:= PrintableString (SIZE (0400) - The size of the concatenated measObjInstId and neDistinguishedName must not exceed 400. MeasResult:= CHOICE iValue INTEGE

40、R, rValue REAL, noValue NULL, . ETSI ETSI TS 132 436 V13.0.0 (2016-02)83GPP TS 32.436 version 13.0.0 Release 13- Normal values are INTEGERs and REALs. The NULL value is reserved to indicate that the measurement item is not applicable or could not be retrieved for the object instance. The sole purpos

41、e of the ellipsis notation used in the MeasResult choice is to facilitate inter-release compatibility in case the choice needs to be extended in future releases. MeasFileFooter:= TimeStamp END ETSI ETSI TS 132 436 V13.0.0 (2016-02)93GPP TS 32.436 version 13.0.0 Release 13Annex A (informative): Examp

42、le of ASN.1 Measurement Report File For readability, a kind of pseudo ASN.1 was used instead of the BER encoding. MeasDataCollection := measFileHeader fileFormatVersion := “32.436 V6.1“, senderName := “DC=panyNN.com,SubNetwork=1,IRPAgent=1,SubNetwork=CountryNN,MeContext=MEC-Gbg-1,ManagedElement=RNC-

43、Gbg-1“, senderType := “RNC“, vendorName := “Company NN“, collectionBeginTime := 20000301140000 , measData nEId nEUserName := “RNC Telecomville“, nEDistinguishedName := “DC=panyNN.com,SubNetwork=1,IRPAgent=1,SubNetwork=CountryNN,MeContext=MEC-Gbg-1,ManagedElement=RNC-Gbg-1“, nESoftwareVersion := “2.1

44、“ , measInfo measInfoId := Category A measTimeStamp := 20000301141430, jobId := “1231“, granularityPeriod := 900, reportingPeriod := 1800, measTypes “attTCHSeizures“, “succTCHSeizures“, “attImmediateAssignProcs“, “succImmediateAssignProcs“ , measValues measObjInstId := “RncFunction=RF-1,UtranCell=Gb

45、g-997“, measResults iValue := 234, iValue := 345, iValue := 567, iValue := 789 , suspectFlag := FALSE , measObjInstId := “RncFunction=RF-1,UtranCell=Gbg-998“, measResults iValue := 890, iValue := 901, iValue := 123, iValue := 234 , suspectFlag := FALSE , measObjInstId := “RncFunction=RF-1,UtranCell=

46、Gbg-999“, measResults iValue := 456, iValue := 567, iValue := 678, iValue := 789 , suspectFlag := TRUE , measFileFooter := 20000301141500 ETSI ETSI TS 132 436 V13.0.0 (2016-02)103GPP TS 32.436 version 13.0.0 Release 13Annex B (informative): Change history Change history Date TSG # TSG Doc. CR Rev Su

47、bject/Comment Cat Old New 2004-09 SA-25 SP-040580 - - Draft created based on 32.401 V6.1.0 and submitted to SA#25 for Information - 1.0.0 2004-12 SA-26 SP-040788 - - Submitted to SA#26 for Approval - 2.0.0 6.0.0 2005-09 SA-29 SP-050585 0001 - Enhance PM ASN.1 file with measInfo C 6.0.0 7.0.0 2008-12

48、 SA-42 - - - Upgrade to Release 8 - 7.0.0 8.0.0 2009-12 SA-46 - - - Upgrade to Release 9 - 8.0.0 9.0.0 2011-03 - - - - Update to Rel-10 version (MCC) - 9.0.0 10.0.0 2012-09 SA-57 - - - Automatic upgrade from previous Release version 10.0.0 - 10.0.0 11.0.0 2014-10 - - - - Update to Rel-12 version (MCC) 11.0.0 12.0.0 2016-01 - - - - Update to Rel-13 version (MCC) 12.0.0 13.0.0 ETSI ETSI TS 132 436 V13.0.0 (2016-02)113GPP TS 32.436 version 13.0.0 Release 13History Document history V13.0.0 February 2016 Publication