ETSI TS 132 509-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Data formats for multi.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelTelecommData formats foeNode B c(3GPP TS 32.5TECHNICAL SPECIFICATION132 509 V13.0.0 (2016communications system (Phaelecommunications System (LTE; munication management; for multi-vendor plug and placonnection to the network .509 version 13.0.0 Rel

2、ease 1316-02) hase 2+); (UMTS); play 13) ETSI ETSI TS 132 509 V13.0.0 (2016-02)13GPP TS 32.509 version 13.0.0 Release 13Reference RTS/TSGS-0532509vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348

3、623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The conten

4、t of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Docume

5、nt Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/t

6、b/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, inclu

7、ding photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards I

8、nstitute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade

9、 Marks registered and owned by the GSM Association. ETSI ETSI TS 132 509 V13.0.0 (2016-02)23GPP TS 32.509 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essentia

10、l IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates ar

11、e available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) wh

12、ich are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or

13、GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “s

14、hould“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation.

15、 ETSI ETSI TS 132 509 V13.0.0 (2016-02)33GPP TS 32.509 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34

16、Data formats for Multi-Vendor Plug and Connect (MvPnC) . 6g34.1 MvPnC client identification in DHCP requests 6g34.2 MvPnC entities information in DHCP replies 7g34.2.1 General 7g34.2.2 Certification Authority (CA/RA) server . 8g34.2.3 Security Gateway (SeGW) 8g34.2.4 Element Manager (EM) 10g34.3 MvP

17、nC entities Fully Qualified Domain Names (FQDN) . 11g34.3.1 General 11g34.3.2 Certification Authority (CA/RA) server . 11g34.3.3 Security Gateway (SeGW) 12g34.3.4 Element Manager (EM) 12g3Annex A (informative): Change history . 13g3History 14g3ETSI ETSI TS 132 509 V13.0.0 (2016-02)43GPP TS 32.509 ve

18、rsion 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the p

19、resent document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under

20、change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family coveri

21、ng the 3rd Generation Partnership Project Technical Specification Group Services and System Aspects, Telecommunication management; as identified below: TS 32.501: “Self-configuration of network elements; Concepts and requirements“. TS 32.508: “Procedure flows for multi-vendor plug and play eNB conne

22、ction to the network“. TS 32.509: “Data formats for multi-vendor plug and play eNB connection to the network“. ETSI ETSI TS 132 509 V13.0.0 (2016-02)53GPP TS 32.509 version 13.0.0 Release 131 Scope The present document describes the data formats used between network entities involved in the multi-ve

23、ndor plug and play eNB connection to network. These data formats are based on requirements and use cases specified in 3GPP TS 32.501 4. The procedure flows where these data exchanged are defined in 3GPP TS 32.508 5. 2 References The following documents contain provisions which, through reference in

24、this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version appl

25、ies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 32.101: “Telecommunication m

26、anagement; Principles and high level requirements“. 3 3GPP TS 32.102: “Telecommunication management; Architecture“. 4 3GPP TS 32.501: “Telecommunication management; Self-configuration of network elements; Concepts and requirements“. 5 3GPP TS 32.508: “Telecommunications management; Procedure flows f

27、or multi-vendor plug and play eNB connection to the network“. 6 3GPP TS 23.003: “Numbering, addressing and identification“. 7 IETF RFC 1035: “Domain Names - Implementation and Specification“. 8 IETF RFC 2131: “Dynamic Host Configuration Protocol“. 9 IETF RFC 2132: “DHCP Options and BOOTP Vendor Exte

28、nsions“. 10 IETF RFC 3396: “Encoding Long Options in the Dynamic Host Configuration Protocol (DHCPv4)“. 11 3GPP TS 33.310: “Network Domain Security (NDS); Authentication Framework (AF)“. 12 IETF RFC 6712: “Internet X.509 Public Key Infrastructure - HTTP Transfer for the Certificate Management Protoc

29、ol (CMP)“. ETSI ETSI TS 132 509 V13.0.0 (2016-02)63GPP TS 32.509 version 13.0.0 Release 133 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1, TS 32.501 4 and the following apply. A term defined in the present docum

30、ent takes precedence over the definition of the same term, if any, in TR 21.905 1 and in TS 32.501 4. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1, TS 32.501 4 and the following apply. An abbreviation defined in the present document takes precede

31、nce over the definition of the same abbreviation, if any, in TR 21.905 1 and in TS 32.501 4. 4 Data formats for Multi-Vendor Plug and Connect (MvPnC) 4.1 MvPnC client identification in DHCP requests The eNB performing the Initial IP Autoconfiguration procedure specified in clause 5.2 of 3GPP TS 32.5

32、08 5 identifies itself as MvPnC compatible DHCP client by using the Vendor Class Identifier DHCP option specified in clause 9.13 of RFC 2132 9 in the following way: - DHCP option code 60; - Length 5 bytes; - Vendor class identifier “MvPnC“. The use of Vendor Class Identifier DHCP option with specifi

33、c value for MvPnC is illustrated in table 4.1.1. Table 4.1.1: Use of Vendor Class Identifier Code Length Vendor Class Identifier 60 5 M v P n C ETSI ETSI TS 132 509 V13.0.0 (2016-02)73GPP TS 32.509 version 13.0.0 Release 134.2 MvPnC entities information in DHCP replies 4.2.1 General The information

34、that eNB receives from the DHCP server while performing the Initial IP Autoconfiguration procedure specified in clause 5.2 of 3GPP TS 32.508 5 may be classified in two categories: basic IP configuration and MvPnC specific configuration. The basic IP configuration information is documented in RFC 213

35、1 8 and RFC 2132 9 and may include the following: - IP address (“yiaddr“ field in 8); - Subnet Mask (option 1 in 9); - Router(s) (option 3 in 9); - IP address(es) of the DNS server(s) (option 6 in 9); - Domain Name (option 15 in 9). The MvPnC specific configuration information is described in detail

36、 in clauses 4.2.2, 4.2.3 and 4.2.4. The DHCP option “Vendor Specific Information“ specified in the clause 8.4 of RFC 2132 9 is used as an opaque container carrying the MvPnC specific configuration from the DHCP server to the eNB performing the MvPnC procedure. The multiple pieces of MvPnC specific c

37、onfiguration within the Vendor Specific Information container are encoded as a sequence of code/length/value fields (also known as “Encapsulated vendor-specific options“ specified in clause 8.4 of RFC 2132 9). The use of Vendor Specific Information DHCP option container with encapsulated vendor-spec

38、ific options encoding is illustrated in table 4.2.1.1. Table 4.2.1.1: Use of the Vendor Specific Information Code Length 1-255 Vendor Specific Information Configuration attribute 1 Configuration attribute 2 . 43 n Type1 Lenght1 Data Type2 Length2 Data . octet octet octet octet n octets octet octet n

39、 octets . The content of the configuration attributes (specific type code value, valid length and data type) carried in the format illustrated in table 4.2.1.1 is specified in the clauses 4.2.2, 4.2.3 and 4.2.4 of the present document. If the size of MvPnC configuration data contained in “Vendor Spe

40、cific Information“ option 43 is greater than 255 bytes, the RFC 3396 10 encoding is used. To avoid ambiguity in the interpretation of string MvPnC configuration attributes, the ASCII character encoding shall be used. Standard network byte order shall be used with appropriate conversion function at t

41、he eNB (matching the local little-endian / big-endian byte order). Some MvPnC configuration attributes may be missing (e.g. the SeGW FQDN attribute may be not present if the SeGW IP address is present) or just have zero length (type octet followed by length octet with value zero and no data octets).

42、 The qualifiers identifying which attributes are mandatory, Optional (O), Conditional Mandatory (CM) or Conditional Optional (CO) and corresponding conditions are defined it the clauses 4.2.2, 4.2.3 and 4.2.4. The order of MvPnC configuration attributes is not important (e.g. attribute of type “1“ m

43、ay appear after the attribute of type “5“). ETSI ETSI TS 132 509 V13.0.0 (2016-02)83GPP TS 32.509 version 13.0.0 Release 134.2.2 Certification Authority (CA/RA) server This clause specifies the information about Certification Authority server that eNB receives from DHCP server in Initial IP Autoconf

44、iguration procedure specified in clause 5.2 of 3GPP TS 32.508 5 and uses for Certificate Enrolment procedure. Table 4.2.2.1: CA/RA configuration attributes Attribute name Attribute tag (code) Attribute length Attribute qualifier Attribute description IP address of the CA/RA 01 Variable CO IP address

45、 of the CMP server. An IPv4 IP address is usually represented as 4 octets. FQDN of the CA/RA 02 Variable CO ASCII string representing the Fully Qualified Domain Name of the CMP server. In case the FQDN is used, the IP address of the DNS server needs to be made available to the eNB before certificate

46、 enrolment. Port number of the CA/RA 03 Variable M Integer representing the port number used by CMP server. The port for HTTP/HTTPSs transfer of CMP messages is not explicitly given in RFC 6712 12, therefore this parameter is required. The port number is usually represented as 2 octets. Path to the

47、CA/RA directory 04 Variable M ASCII string representing the path to the CMP server directory. A CMP server may be located in an arbitrary path other than root. Subject name of the CA/RA 05 Variable M ASCII string representing the subject name of the CA/RA. The use is described in 3GPP TS 33.310 11 c

48、lause 9.5.3. Protocol indication 06 Variable CM ASCII string representing the protocol (HTTP or HTTPS) to be used for certificate enrolment. The use is described in 3GPP TS 33.310 11 clause 9.6. Table 4.2.2.2: Attribute constraints Name Definition IP address CO qualifier The IP address is optional i

49、f the FQDN is present FQDN CO qualifier The FQDN is optional if the IP address is present Protocol indication CM qualifier The protocol indication is mandatory if HTTPS protocol is used 4.2.3 Security Gateway (SeGW) This clause specifies the information about Security Gateway server that eNB receives from DHCP server in Initial IP Autoconfiguration procedure specified in clause 5.2 of 3GPP TS 32.508 5 and uses for Establishing Secure Connection procedure. ETSI ETSI TS 132 509 V13.0.0 (2016-02)93G