ETSI TS 132 511-2017 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Automatic Neighbour Relation (ANR) management Concepts and requirements (V14.pdf

1、 ETSI TS 132 511 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Automatic Neighbour Relation (ANR) management; Concepts and requirements (3GPP TS 32.511 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 132 511 V14.0.0 (2017-04)1

2、3GPP TS 32.511 version 14.0.0 Release 14Reference RTS/TSGS-0532511ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture

3、de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modif

4、ied without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Us

5、ers of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please sen

6、d your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission

7、 of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETS

8、I logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered

9、and owned by the GSM Association. ETSI ETSI TS 132 511 V14.0.0 (2017-04)23GPP TS 32.511 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is

10、 publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the

11、 ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be

12、, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. Th

13、ese should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should no

14、t“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132

15、511 V14.0.0 (2017-04)33GPP TS 32.511 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Concepts and backg

16、round 6g35 Requirements 6g35.1 Business level requirements . 6g35.1.1 Void 7g35.1.1.1 Void. 7g35.1.1.2 Void. 7g35.1.1.3 Void. 7g35.2 Specification level requirements 7g35.2.1 Void 7g35.2.2 Void 7g35.2.3 Void 7g35.2.4 Use cases . 7g35.2.4.1 Management of fully automatic ANR function . 7g35.2.4.2 Manu

17、al start of the ANR function by operator 8g35.2.4.3 Handling of noX2 attribute . 8g35.2.4.4 Manual stop of the ANR function by operator 9g35.2.5 Requirements 10g35.2.5.1 ANR function management in E-UTRAN 10g35.2.5.2 ANR function management in UTRAN 11g3Annex A (informative): Change history . 13g3Hi

18、story 14g3ETSI ETSI TS 132 511 V14.0.0 (2017-04)43GPP TS 32.511 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change followin

19、g formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG

20、 for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the documen

21、t. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project Technical Specification Group Services and System Aspects, Telecommunication management; as identified below: 32.511: “Automatic Neighbour Relation (ANR) management; Concepts and requirements“.

22、 ETSI ETSI TS 132 511 V14.0.0 (2017-04)53GPP TS 32.511 version 14.0.0 Release 141 Scope The present document describes the concepts and requirements for the management of Automatic Neighbour Relation (ANR) in UTRAN and E-UTRAN across the Itf-N. The ANR management is a key feature of Self Organizing

23、Networks (SON) 4. The NR concept and background information are described in clause 4. The requirements for management of NR are defined in clause 5. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - Refere

24、nces are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GS

25、M document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 3 3GPP TS 32.1

26、02: “Telecommunication management; Architecture“. 4 3GPP TR 32.816: “Telecommunication management; Study on Management of Evolved Universal Terrestrial Radio Access Network (E-UTRAN) and Evolved Packet Core (EPC)“. 5 3GPP TS 32.501 “Telecommunication management; Self-Configuration of Network Element

27、s; Concepts and requirements“. 6 3GPP TS 36.300 “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2“. 7 3GPP TS 32.301 “Telecommunication management; Configuration Management (CM); Notification Integratio

28、n Reference Point (IRP); Requirements“. 8 3GPP TS 25.484 “Automatic Neighbour Relation (ANR) for UTRAN; Stage 2“. 3 Definitions and abbreviations For the purposes of the present document, the terms and definitions given in TS 32.101 2, TS 32.102 3 and TS 21.905 1 and the following apply. A term defi

29、ned in the present document takes precedence over the definition of the same term, if any, in TS 32.101 2, TS 32.102 3 and TS 21.905 1, in that order. 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in t

30、he present document takes precedence over the definition of the same term, if any, in TR 21.905 1. ANR function: The ANR function in E-UTRAN is described in TS 36.300 6, section 22.3.2a. The ANR function in UTRAN is described in TS 25.484 8. Neighbour cell Relation: The Neighbour cell Relation (NR)

31、in E-UTRAN is defined in TS 36.300 6 section 22.3.2a. The Neighbour cell Relation in UTRAN is defined in TS 25.484 8. ETSI ETSI TS 132 511 V14.0.0 (2017-04)63GPP TS 32.511 version 14.0.0 Release 14Searchlist: List of frequencies and supporting information to be used for neighbour cell measurements.

32、The Searchlist contains entries for E-UTRAN and supported IRATs. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation,

33、if any, in TR 21.905 1. ANR Automatic Neighbour Relation eNB eNodeB or evolved NodeB NR Neighbour cell Relation NRT Neighbour cell Relation Table UC Use Case 4 Concepts and background For E-UTRAN, the ANR function in the eNB relates to the Use Cases Establishment of new eNB in network and Optimisati

34、on of the neighbourhood list in 4. - For Establishment of new eNB in network. If the operator so chooses, the OAM system adds and configures NRs before the eNB goes into operation. - For Optimisation of the neighbourhood list, the ANR function deals with automatic NR additions and removals. It minim

35、izes the need for planning and configuring NRs. If the operator so chooses, the OAM system adds and configures NRs or removes NRs after the eNB goes into operation. For UTRAN, the ANR function concept and overall description is documented in TS 25.484 8. - The ANR function in RNC allows OAM system t

36、o manage the NRT. OAM system can add and delete NRs and also change the attributes of the NRs. The OAM system is informed about changes in the NRT made by ANR function. 5 Requirements 5.1 Business level requirements REQ-ANR-CON-001 NRs shall be set up and optimized with no or minimal human intervent

37、ion. REQ-ANR-CON-002 For E-UTRAN, initial status of the newly created NR by ANR function shall be such that HO is allowed, X2 connection setup is allowed, and the NR is allowed to be removed by ANR function in eNB. REQ-ANR-CON-003 E-UTRAN ANR supports management of NRs from E-UTRAN to E-UTRAN, from

38、E-UTRAN to UTRAN, from E-UTRAN to CDMA2000 and from E-UTRAN to GERAN. REQ-ANR-CON-004 For UTRAN, initial status of the newly created NR by ANR function shall be such that HO is allowed and the NR is allowed to be removed by ANR function in RNC. REQ-ANR-CON-005 UTRAN ANR supports management of NRs fr

39、om UTRAN to UTRAN, from UTRAN to E-UTRAN and from UTRAN to GERAN. ETSI ETSI TS 132 511 V14.0.0 (2017-04)73GPP TS 32.511 version 14.0.0 Release 145.1.1 Void 5.1.1.1 Void 5.1.1.2 Void 5.1.1.3 Void 5.2 Specification level requirements 5.2.1 Void 5.2.2 Void 5.2.3 Void 5.2.4 Use cases 5.2.4.1 Management

40、of fully automatic ANR function Use Case Stage Evolution / Specification Related use Goal (*) The goal is that the IRPManager may add and remove NRs and that it may change attributes of the NRs Actors and Roles (*) IRPManager as user Telecom resources ANR function eNB or RNC Assumptions Pre conditio

41、ns The ANR function in eNB or RNC is active; The cell may or may not have Neighbour Relations configured by O For E-UTRAN, the eNB has finished Use Case Self-configuration of a new eNodeB 5; For UTRAN, the RNC is properly installed and running. Begins when This Use Case begins when all pre condition

42、s have been met. Step 1 (*) (M) If the IRPManager finds out that an unsuitable Neighbour Relation has been added by ANR, the IRPManager may “Blacklist” that particular Neighbour Relation. If the IRPManager finds out that a desired Neighbour Relation has not been added by ANR, the IRPManager may “Whi

43、telist” that particular Neighbour Relation. The IRPManager may uncheck the noRemove attribute from any present Neighbour Relation. Ends when (*) This Use Case ends when the eNB or RNC is taken out of service or when the ANR function is stopped. Exceptions One of the steps identified above fails and

44、retry is unsuccessful. Post Conditions Traceability (*) REQ-ANR-CON-001 ETSI ETSI TS 132 511 V14.0.0 (2017-04)83GPP TS 32.511 version 14.0.0 Release 145.2.4.2 Manual start of the ANR function by operator Use Case Stage Evolution / Specification Related use Goal (*) The ANR function in eNB or RNC can

45、 be enabled by IRPManager. Actors and Roles (*) IRPManager as user Telecom resources ANR function eNB or RNC Assumptions Pre conditions The ANR function is not active; The eNB or RNC may have Neighbour Relations. The NRs may be configured by O&M or be may have been added by ANR function if ANR funct

46、ion has been active previously. Begins when The Use Case begins when the IRP Manager starts the ANR function. Step 1 (*) (M) The IRPManager enables the ANR function in eNB or RNC. Ends when (*) Ends when all steps identified above are completed or when an exception occurs Exceptions One of the steps

47、 identified above fails and retry is unsuccessful. Post Conditions The ANR function in eNB or RNC is enabled by IRPManager successfully or unsuccessfully. Traceability (*) REQ-ANR-FUN-10, REQ-ANR-FUN-26 5.2.4.3 Handling of noX2 attribute Use Case 1 IRPManager needs to be able to forbid and allow the

48、 establishment of X2 interfaces from the source macro eNBs to a target eNB. IRPManager is aware that the target eNB cannot support X2 connections. This UC on how noX2 is used relates to node level rather than cell level. Use Case 2 IRPManager needs to be able to allow and forbid the establishment of

49、 X2 interfaces from the source HeNBs to a target macro eNB. This UC supports the case when a potentially large number of HeNBs in the vicinity of a macro eNB, X2 establishment requests from HeNB might saturate the physical ports of the macro eNB (not in terms of bandwidth saturation but rather the saturation in terms of the number of simultaneous establishment requests supported). This UC on how noX2 is used relates to node level rather than Cell level. Use Case 3 IRPManager needs to be able