ETSI TS 132 551-2016 Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Energy Saving Management (ESM) Concepts and requirements (V13 0 0 3GPP TS 32.pdf

1、 ETSI TS 1Universal Mobile TelTelecommEnergy SaConcep(3GPP TS 32.5TECHNICAL SPECIFICATION132 551 V13.0.0 (2016elecommunications System (LTE; munication management; Saving Management (ESM); cepts and requirements .551 version 13.0.0 Release 1316-02) (UMTS); 13) ETSI ETSI TS 132 551 V13.0.0 (2016-02)1

2、3GPP TS 32.551 version 13.0.0 Release 13Reference RTS/TSGS-0532551vd00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture

3、de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modif

4、ied without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Us

5、ers of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your com

6、ment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI.

7、The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are

8、 Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 132 551 V13.0.0 (20

9、16-02)23GPP TS 32.551 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be f

10、ound in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR

11、Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This

12、Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding

13、 ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are

14、to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132 551 V13.0.0 (2016-02)33GPP TS 32.551 version 13.0.0 Release 13Cont

15、ents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.3 Abbreviations . 6g34 Concepts and Backgrounds 7g34.1.0 Introduction 7g34.1.1 Fundamental concepts. 7g34.1

16、.2 Additional concepts for selected uses cases 8g34.1.3 Operator control 8g35 Business level requirements . 10g35.1 Requirements 10g35.2 Actor roles 11g35.3 Telecommunication resources 11g35.4 High level use cases . 11g35.4.1 Cell overlaid use case . 11g35.4.2 Capacity limited network use case 12g36

17、 Specification level requirements 13g36.1 Requirements 13g36.1.1 Common requirements 13g36.1.2 Requirements for NM Centralized ES 13g36.1.3 Requirements for EM Centralized ES . 14g36.1.4 Requirements for Distributed ES 14g36.2 Actor roles 15g36.3 Telecommunication resources 15g36.4 High level use ca

18、ses . 15g36.4.0 General 15g36.4.1 Energy saving activation on selected network elements (Centralized ES on NM layer) . 16g36.4.2 Deactivation of energy saving on selected network elements (Centralized ES on NM layer) 17g36.4.3 Energy saving activation on selected network elements (Distributed ES) 18

19、g36.4.4 Energy saving deactivation on selected network elements (Distributed ES) 19g36.4.5 Coordination between Energy Saving and Cell outage . 19g36.4.6 Energy saving switch off by IRP Manager on selected network elements (Distributed ES) 20g3Annex A (informative): Use case details: Capacity-limite

20、d network use case 21g3Annex B (informative): Use Case details: eNB overlaid use case . 23g3Annex C (informative): Change history . 26g3History 27g3ETSI ETSI TS 132 551 V13.0.0 (2016-02)43GPP TS 32.551 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGenerat

21、ion Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date an

22、d an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical e

23、nhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project Technical Specification Group Services and System Aspec

24、ts, Telecommunication management; as identified below: TS 32.551: Energy Savings Management (ESM); Concepts and Requirements Stage 2 for Energy Savings Management is contained in: TS 32.522 5: Self-Organizing Networks (SON) Policy Network Resource Model (NRM) Integration Reference Point (IRP): Infor

25、mation Service (IS) TS 32.762 4: Evolved Universal Terrestrial Radio Access Network (E-UTRAN) Network Resource Model (NRM) Integration Reference Point (IRP): Information Service (IS) TS 32.642 7: Configuration Management(CM); UTRAN network resources Integration Reference Point (IRP): Network Resourc

26、e Model (NRM) TS 32.652 8: Configuration Management(CM); GERAN network resources Integration Reference Point (IRP): Network Resource Model (NRM) This work is based on the Study contained in TR 32.826 2 Study on Energy Savings Management (ESM) and TR 32.834 9 Study on Operations, Administration and M

27、aintenance (OAM) aspects of inter-Radio-Access-Technology (RAT) energy saving. ETSI ETSI TS 132 551 V13.0.0 (2016-02)53GPP TS 32.551 version 13.0.0 Release 131 Scope The present document describes the concepts and requirements how energy savings functionalities are managed what requirements need to

28、be met to support this. The document also describes if a requirement shall be met via the Itf-N interface or via other means. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific

29、 (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-speci

30、fic reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TR 32.826: “Telecommunication management; Study on Energy Savings Management (ESM)“. 3 3GPP TS 25.104: “Base Station (BS)

31、 radio transmission and reception (FDD)“. 4 3GPP TS 32.762: “Telecommunication management; Evolved Universal Terrestrial Radio Access Network (E-UTRAN) Network Resource Model (NRM) Integration Reference Point (IRP); Information Service (IS)“. 5 3GPP TS 32.522: “Telecommunication management; Self-Org

32、anizing Networks (SON) Policy Network Resource Model (NRM) Integration Reference Point (IRP): Information Service (IS)“. 6 3GPP TS 32.500: “Telecommunication management; Self-Organizing Networks (SON); Concepts and requirements“. 7 3GPP TS 32.642: “Configuration Management(CM); UTRAN network resourc

33、es Integration Reference Point (IRP): Network Resource Model (NRM)“. 8 3GPP TS 32.652: “Configuration Management(CM); GERAN network resources Integration Reference Point (IRP): Network Resource Model (NRM)“. 9 3GPP TR 32.834: “Study on Operations, Administration and Maintenance (OAM) aspects of inte

34、r-Radio-Access-Technology (RAT) energy saving “. 10 3GPP TS 36.300: “ E- UTRA and E-UTRAN; Overall description; Stage 2“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined i

35、n the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Centralized ES: ES solution where ES algorithms are executed in the OAM system. Centralized ES has two variants: ETSI ETSI TS 132 551 V13.0.0 (2016-02)63GPP TS 32.551 version 13.0.0 Release 13 NM-Ce

36、ntralized ES: ES solution where ES algorithms are executed at the Network Management level. EM-Centralized ES: ES solution where ES algorithms are executed at the Element Management level. Distributed ES: ES solution where ES algorithms are executed at the Network Element level. notEnergySaving stat

37、e: the default state in peak-traffic situation, with no specific energy saving in progress. energySaving state: in an off-peak-traffic situation, some functions of a cell or a network element are powered-off or restricted in resource usage in other ways, whereas the cell or network element is still

38、controllable. ES Probing procedure : Upon being triggered by the Cell Activation Request message - of the Cell Activation procedure (see TS 36.300 10 section 20.2.2.15) - sent from a node owning a candidate cell, eNBs owning ES probing capable original cell(s) indicate its (their) presence to UEs fo

39、r a period of time which last up to the Minimum Activation Time (see TS 36.300 10 section 22.4.4.2) . An ES probing cell prevents idle mode UEs from camping on the cell and prevents incoming handovers to the same cell. The results of these measurements are used to determine whether the cell has UEs

40、within its reach and thus could take over load by going into the notEnergySaving state.g3g3compensatingForEnergySaving state: in an off-peak traffic situation, a network element is remaining powered on, e.g. taking over the coverage areas of neighbor base station in energySaving state. ES activation

41、: the procedure to switch off a cell or network element or restrict the usage of physical resources for energy saving purposes. As a result, a specific network element transitions is in energySaving state. ES compensation: the procedure to change a cell“s or network element“s configuration to remain

42、 powered on for compensating energy saving activation on other cells or network elements, e.g. by increasing a base station“s coverage area. As a result, the network element is in compensatingForEnergySaving state. ES deactivation: the procedure to switch on a cell ornetwork element or resume the us

43、age of physical resources which had been ES activated before. As a result, a specific network element is in notEnergySaving state. Enable ES: ES (including ES activation/compensation/deactivation, related computations etc.) is allowed to be performed. Disable ES: ES is prohibited to be performed. Wh

44、en ES is disabled, subject cells or NEs are in notEnergySaving state. Candidate cell: candidate cell is a cell which can provide coverage when the original cell goes into energySaving state. 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the fo

45、llowing apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. ES Energy Saving ESM Energy Saving Management ETSI ETSI TS 132 551 V13.0.0 (2016-02)73GPP TS 32.551 version 13.0.0 Release 134 Concepts and Background

46、s 4.1.0 Introduction Protecting the environment and combating climate change are challenges that we face today. In the telecom environment, as energy prices increase, there is added incentive for Network Operators to look for means to reduce energy costs. OAM of mobile networks can contribute to ene

47、rgy saving by allowing the operator to set policies to minimize consumption of energy, while maintaining coverage, capacity and quality of service. The permitted impact on coverage, capacity and quality of service is determined by operator“s policy. When a cell is in energy savings state it may need

48、 neighbouring cells to pick up the load. However a cell in energySaving state cannot cause coverage holes or create undue load on the surrounding cells. All traffic on that cell is expected to be drained to other overlaid/umbrella cells before any cells moves to energySaving state. A cell in energyS

49、aving state is not considered a cell outage or a fault condition. No alarms should be raised to the IRPManager for any condition that is a consequence of a NE moving into energySaving state In addition, the use of the renewable energy sources (e.g. wind, solar energy) should be encouraged in mobile networks. The following ESM concepts can apply to different RATs, e.g. UMTS and LTE. Nevertheless some of these ESM concepts may be limited to specific RATs and network elements, and specific solutions may be required for them. 4.1.1 F