ETSI TS 132 606-2016 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Ma.pdf

1、 ETSI TS 1Digital cellular telecUniversal Mobile TeTelecommConfigurBasic CM IntegSolutio(3GPP TS 32.6TECHNICAL SPECIFICATION132 606 V13.0.0 (2016ecommunications system (PhasTelecommunications System (ULTE; mmunication management; uration Management (CM); tegration Reference Point (IRP);tion Set (SS)

2、 definitions .606 version 13.0.0 Release 1316-02) ase 2+); (UMTS); P); 13) ETSI ETSI TS 132 606 V13.0.0 (2016-02)13GPP TS 32.606 version 13.0.0 Release 13Reference RTS/TSGS-0532606vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 F

3、ax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic ve

4、rsions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document i

5、s the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is av

6、ailable at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any mean

7、s, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. Europ

8、ean Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partne

9、rs. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 132 606 V13.0.0 (2016-02)23GPP TS 32.606 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The inform

10、ation pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the E

11、TSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the

12、updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3G

13、PP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present

14、 document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables ex

15、cept when used in direct citation. ETSI ETSI TS 132 606 V13.0.0 (2016-02)33GPP TS 32.606 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Defini

16、tions 7g33.2 Abbreviations . 7g34 Solution Set Definitions . 7g3Annex A (normative): CORBA Solution Set . 8g3A.1 Architectural features . 8g3A.1.1 Syntax for Distinguished Names and Versions 8g3A.1.2 IRP document version number string . 8g3A.1.3 Filter language 8g3A.2 Mapping . 9g3A.2.1 General mapp

17、ings . 9g3A.2.2 Operation mapping . 9g3A.2.3 Operation parameter mapping 10g3A.3 Solution Set definitions 13g3A.3.1 IDL definition structure 13g3A.3.2 IDL specification “BasicCMIRPConstDefs.idl“ 14g3A.3.3 IDL specification “BasicCMIRPSystem.idl“ 17g3Annex B (normative): SOAP Solution Set . 23g3B.1 A

18、rchitectural features . 23g3B.1.1 Syntax for Distinguished Names and Versions 23g3B.1.2 Supported W3C specifications . 23g3B.1.3 Prefixes and namespaces 23g3B.1.4 Filter language 23g3B.2 Mapping . 24g3B.2.1 General mappings . 24g3B.2.2 Operation mapping . 24g3B.2.3 Operation parameter mapping 25g3B.

19、2.3.1 Operation getMoAttributes 25g3B.2.3.1.1 Input parameters 25g3B.2.3.1.2 Output parameters . 25g3B.2.3.1.3 Fault definition 26g3B.2.3.2 Operation getContainment 26g3B.2.3.2.1 Input parameters 26g3B.2.3.2.2 Output parameters . 26g3B.2.3.2.3 Fault definition 27g3B.2.3.3 Operation createMO 27g3B.2.

20、3.3.1 Input parameters 27g3B.2.3.3.2 Output parameters . 27g3B.2.3.3.3 Fault definition 28g3B.2.3.4 Operation deleteMO 28g3ETSI ETSI TS 132 606 V13.0.0 (2016-02)43GPP TS 32.606 version 13.0.0 Release 13B.2.3.4.1 Input parameters 28g3B.2.3.4.2 Output parameters . 28g3B.2.3.4.3 Fault definition 29g3B.

21、2.3.5 Operation setMOAttributes 29g3B.2.3.5.1 Input parameters 29g3B.2.3.5.2 Output parameters . 30g3B.2.3.5.3 Fault definition 30g3B.3 Solution Set definitions 31g3B.3.1 WSDL definition structure . 31g3B.3.2 Graphical Representation . 31g3B.3.3 WSDL specification BasicCMIRPSystem.wsdl . 32g3Annex C

22、 (informative): Change history . 39g3History 40g3ETSI ETSI TS 132 606 V13.0.0 (2016-02)53GPP TS 32.606 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work

23、 within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to

24、TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only change

25、s have been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project: Technical Specification Group Services and System Aspects; Telecommunication management; as identified below: 32.601: “Configuration Management (CM); Bas

26、ic CM Integration Reference Point (IRP); Requirements“ 32.602: “Configuration Management (CM); Basic CM Integration Reference Point (IRP); Information Service (IS)“ 32.606: “Configuration Management (CM); Basic CM Integration Reference Point (IRP): Solution Set (SS) definitions“ Configuration Manage

27、ment (CM), in general, provides the operator with the ability to assure correct and effective operation of the 3G network as it evolves. CM actions have the objective to control and monitor the actual configuration on the Network Elements (NEs) and Network Resources (NRs), and they may be initiated

28、by the operator or by functions in the Operations Systems (OSs) or NEs. CM actions may be requested as part of an implementation programme (e.g. additions and deletions), as part of an optimisation programme (e.g. modifications), and to maintain the overall Quality of Service (QoS). The CM actions a

29、re initiated either as single actions on single NEs of the 3G network, or as part of a complex procedure involving actions on many resources/objects in one or several NEs. ETSI ETSI TS 132 606 V13.0.0 (2016-02)63GPP TS 32.606 version 13.0.0 Release 131 Scope The purpose of this document is to define

30、 the mapping of the Basic CM IRP: IS (see 3GPP TS 32.602 8) to the protocol specific details necessary for implementation of this IRP in a CORBA/IDL environment and in a SOAP/WSDL environment. This document defines NRM independent data types and methods. This Solution Set specification is related to

31、 3GPP TS 32.602 V12.0.X. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a s

32、pecific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the pre

33、sent document. 1 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 2 3GPP TS 32.102: “Telecommunication management; Architecture“. 3 3GPP TS 32.300: “Telecommunication management; Configuration Management (CM); Name convention for Managed Objects“. 4 3GPP TS 32.

34、306: “Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IRP): Solution Set (SS) definitions“. 5 3GPP TS 32.311: “Telecommunication management; Generic Integration Reference Point (IRP) management; Requirement“. 6 3GPP TS 32.312: “Telecommunication

35、 management; Generic Integration Reference Point (IRP) management; Information Service (IS)“. 7 3GPP TS 32.600: “Telecommunication management; Configuration Management (CM); Concept and high-level requirements“. 8 3GPP TS 32.602: “Telecommunication management; Configuration Management (CM); Basic CM

36、 Integration Reference Point (IRP) Information Service (IS)“. 9 3GPP TS 32.666: “Telecommunication management; Configuration Management (CM); Kernel CM Integration Reference Point (IRP): Solution Set (SS) definitions“. 10 OMG Notification Service, Version 1.0. 11 W3C SOAP 1.1 specification (http:/ww

37、w.w3.org/TR/2000/NOTE-SOAP-20000508/) 12 W3C WSDL 1.1 specification (http:/www.w3.org/TR/2001/NOTE-wsdl-20010315) 13 W3C XPath 1.0 specification (http:/www.w3.org/TR/1999/REC-xpath-19991116) 14 W3C SOAP 1.2 specification (http:/www.w3.org/TR/soap12-part1/) ETSI ETSI TS 132 606 V13.0.0 (2016-02)73GPP

38、 TS 32.606 version 13.0.0 Release 133 Definitions and abbreviations 3.1 Definitions For terms and definitions please refer to 3GPP TS 32.101 1, 3GPP TS 32.102 2, 3GPP TS 32.600 7 and 3GPP TS 32.602 8. IRP document version number string The IRP document version number (sometimes called “IRPVersion“ o

39、r “SS version number“) string is used to identify this specification. The string is derived using a rule described in 3GPP TS 32.311 5. This string (or sequence of strings, if more than one version is supported) is returned in getBasicCmIRPVersion method. 3.2 Abbreviations For the purposes of the pr

40、esent document, the following abbreviations apply: CORBA Common Object Request Broker Architecture DN Distinguished Name IS Information Service IDL Interface Definition Language (OMG) IRP Integration Reference Point MO Managed Object MOC Managed Object Class NRM Network Resource Model OMG Object Man

41、agement Group SS Solution Set WSDL Web Service Description Language 4 Solution Set Definitions This specification defines the following 3GPP Basic CM IRP Solution Set Definitions: Annex A provides the CORBA Solution Set. Annex B provides the SOAP Solution Set. ETSI ETSI TS 132 606 V13.0.0 (2016-02)8

42、3GPP TS 32.606 version 13.0.0 Release 13Annex A (normative): CORBA Solution Set This annex specifies the CORBA Solution Set for the IRP whose semantics are specified in 3GPP TS 32.602 8. A.1 Architectural features The overall architectural feature of Basic Configuration Management IRP is specified i

43、n 3GPP TS 32.602 8. This clause specifies features that are specific to the CORBA SS. A.1.1 Syntax for Distinguished Names and Versions The syntax of a Distinguished Name is defined in 3GPP TS 32.300 3. The version of this IRP is represented as a string (see also clause 3.1). A.1.2 IRP document vers

44、ion number string The IRP document version number (sometimes called “IRPVersion“ or “SS version number“) string is used to identify this specification. The string is derived using a rule described in 3GPP TS 32.312: 6. This string (or sequence of strings, if more than one version is supported) is re

45、turned in getBasicCmIRPVersion method. A.1.3 Filter language The filter language used in the SS is the Extended Trader Constraint Language (see OMG Notification Service 10). IRPAgents may throw a FilterComplexityLimit exception when a given filter is too complex. However, for 3GPP Release 99 an “emp

46、ty filter“ shall be used i.e. a filter that satisfies all MOs of a scoped search (this does not affect the filter for notifications as defined in the Notification IRP see 3GPP TS 32.306 4). ETSI ETSI TS 132 606 V13.0.0 (2016-02)93GPP TS 32.606 version 13.0.0 Release 13A.2 Mapping A.2.1 General mappi

47、ngs The IS parameter name managedObjectInstance is mapped into DN. Attributes modelling associations as defined in the NRM (here also called “reference attributes“) are in this SS mapped to attributes. The names of the reference attributes in the NRM are mapped to the corresponding attribute names i

48、n the MOC. When the cardinality for an association is 01 or 11 the datatype for the reference attribute is defined as an MOReference. The value of an MO reference contains the distinguished name of the associated MO. When the cardinality for an association allows more than one referred MO, the refer

49、ence attribute will be of type MOReferenceSet, which contains a sequence of MO references. If a reference attribute is changed, an AttributeValueChange notification (see TS 32.666 9) is emitted. A.2.2 Operation mapping The Basic CM IRP: IS (see 3GPP TS 32.602 8) defines semantics of operation visible across the Basic Configuration Management IRP. Table A.2.2 indicates mapping of these operations to their equivalents defined in this SS. Table A.2.2: Mapping from IS Operation to SS equivalents IS Operation (3GPP TS