ETSI TS 132 725-2011 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Telecommunication management Configuration Management (.pdf

1、 ETSI TS 132 725 V8.0.1 (2011-10) Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Telecommunication management; Configuration Management (CM); Repeater network resources Integration Reference Point (IRP); Bulk CM eXtensible Markup Language (X

2、ML) file format definition (3GPP TS 32.725 version 8.0.1 Release 8) GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRTechnical Specification ETSI ETSI TS 132 725 V8.0.1 (2011-10)13GPP TS 32.725 version 8.0.1 Release 8Reference RTS/TSGS-0532725v801 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia

3、Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The p

4、resent document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI print

5、ers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb

6、/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restr

7、iction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of

8、its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 132 725 V8.0.1 (2011-10)23GPP TS 32.725 version 8.0.1 Release 8Intellectual Property Rights IPRs essential or potentially essential to the present docum

9、ent may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of

10、ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPR

11、s not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to techni

12、cal specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform

13、.asp. ETSI ETSI TS 132 725 V8.0.1 (2011-10)33GPP TS 32.725 version 8.0.1 Release 8Contents Intellectual Property Rights 2g3Foreword . 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 7g34 Structure and content of

14、configuration data XML files 7g3Annex A (normative): Configuration data file NRM-specific XML schema (file name “RepeaterNrm.xsd“) 8g3Annex B (informative): XML schema electronic files . 10g3Annex C (informative): Change history . 11g3History 12g3ETSI ETSI TS 132 725 V8.0.1 (2011-10)43GPP TS 32.725

15、version 8.0.1 Release 8Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the p

16、resent document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under

17、change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family coveri

18、ng the 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below: 32.721: Configuration Management (CM); Repeater network resources Integration Reference Point (IRP); Requirements 32.722: Configuration Management (

19、CM); Repeater network resources Integration Reference Point (IRP); Information Service (IS) 32.723: Configuration Management (CM); Repeater network resources Integration Reference Point (IRP); Common Object Request Broker Architecture (CORBA) Solution Set (SS) 32.725: Configuration Management (CM);

20、Repeater network resources Integration Reference Point (IRP): Bulk CM eXtensible Markup Language (XML) file format definition Configuration Management (CM), in general, provides the operator with the ability to assure correct and effective operation of the 3G network as it evolves. CM actions have t

21、he objective to control and monitor the actual configuration on the Network Elements (NEs) and Network Resources (NRs), and they may be initiated by the operator or by functions in the Operations Systems (OSs) or NEs. CM actions may be requested as part of an implementation programme (e.g. additions

22、 and deletions), as part of an optimisation programme (e.g. modifications), and to maintain the overall Quality of Service (QoS). The CM actions are initiated either as single actions on single NEs of the 3G network, or as part of a complex procedure involving actions on many resources/objects in on

23、e or several NEs. CM, in general, provides the operator with the ability to assure correct and effective operation of the 3G network as it evolves. CM actions have the objective to control and monitor the actual configuration on the NEs and NRs, and they may be initiated by the operator or by functi

24、ons in the OSs or NEs. ETSI ETSI TS 132 725 V8.0.1 (2011-10)53GPP TS 32.725 version 8.0.1 Release 81 Scope The present document provides the NRM-specific part related to the Repeater Network Resources IRP NRM 1 of the XML file format definition for the Bulk Configuration Management IRP IS 2. The mai

25、n part of this XML file format definition is provided by 3GPP TS 32.615 3. Bulk CM XML file formats are based on XML 4, XML Schema 5 6 7 and XML Namespace 8 standards. This File Format Definition specification is related to 3GPP TS 32.722. 2 References The following documents contain provisions whic

26、h, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the l

27、atest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 32.722: “Telecommunication management; Configuration Management (C

28、M); Repeater Network Resources Model (NRM):Integration Reference Point (IRP): Information Service (IS)“. 2 3GPP TS 32.612: “Telecommunication management; Configuration Management (CM); Bulk CM Integration Reference Point (IRP); Information Service (IS)“. 3 3GPP TS 32.615: “Telecommunication manageme

29、nt; Configuration Management (CM); Bulk CM Integration Reference Point (IRP); eXtensible Markup Language (XML) file format definition“. 4 W3C REC-xml-20001006: “Extensible Markup Language (XML) 1.0 (Second Edition)“. 5 W3C REC-xmlschema-0-20010502: “XML Schema Part 0: Primer“. 6 W3C REC-xmlschema-1-

30、20010502: “XML Schema Part 1: Structures“. 7 W3C REC-xmlschema-2-20010502: “XML Schema Part 2: Datatypes“. 8 W3C REC-xml-names-19990114: “Namespaces in XML“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: XML file:

31、 file containing an XML document XML document: composed of the succession of an optional XML declaration followed by a root XML element NOTE: See 4; in the scope of the present document. XML declaration: it specifies the version of XML being used NOTE: See 4. ETSI ETSI TS 132 725 V8.0.1 (2011-10)63G

32、PP TS 32.725 version 8.0.1 Release 8XML element: has a type, is identified by a name, may have a set of XML attribute specifications and is either composed of the succession of an XML start-tag followed by the XML content of the XML element followed by an XML end-tag, or composed simply of an XML em

33、pty-element tag; each XML element may contain other XML elements NOTE: See 4. empty XML element: having an empty XML content; an empty XML element still possibly has a set of XML attribute specifications; an empty XML element is either composed of the succession of an XML start-tag directly followed

34、 by an XML end-tag, or composed simply of an XML empty-element tag NOTE: See 4. XML content (of an XML element): empty if the XML element is simply composed of an XML empty-element tag; otherwise the part, possibly empty, of the XML element between its XML start-tag and its XML end-tag XML start-tag

35、: the beginning of a non-empty XML element is marked by an XML start-tag containing the name and the set of XML attribute specifications of the XML element NOTE: See 4. XML end-tag: the end of a non-empty XML element is marked by an XML end-tag containing the name of the XML element NOTE: See 4. XML

36、 empty-element tag: composed simply of an empty-element tag containing the name and the set of XML attribute specifications of the XML element NOTE: See 4. XML attribute specification: has a name and a value NOTE: See 4. DTD: defines structure and content constraints to be respected by an XML docume

37、nt to be valid with regard to this DTD NOTE: See 4. XML schema: more powerful than a DTD, an XML schema defines structure and content constraints to be respected by an XML document to conform with this XML schema; through the use of XML namespaces several XML schemas can be used together by a single

38、 XML document; an XML schema is itself also an XML document that shall conform with the XML schema for XML schemas NOTE: See 5, 6 and 7. XML namespace: enables qualifying element and attribute names used in XML documents by associating them with namespaces identified by different XML schemas NOTE: S

39、ee 8, in the scope of the present document. XML complex type: defined in an XML schema; cannot be directly used in an XML document; can be the concrete type or the derivation base type for an XML element type or for another XML complex type; ultimately defines constraints for an XML element on its X

40、ML attribute specifications and/or its XML content NOTE: See 5, 6 and 7. XML element type: declared by an XML schema; can be directly used in an XML document; as the concrete type of an XML element, directly or indirectly defines constraints on its XML attribute specifications and/or its XML content

41、; can also be the concrete type or the derivation base type for another XML element type NOTE: See 5, 6 and 7. ETSI ETSI TS 132 725 V8.0.1 (2011-10)73GPP TS 32.725 version 8.0.1 Release 83.2 Abbreviations For the purposes of the present document, the following abbreviations apply: CM Configuration M

42、anagement DTD Document Type Definition EDGE Enhanced Data for GSM Evolution GERAN GSM/EDGE Radio Access Network GSM Global System for Mobile communication IRP Integration Reference Point IS Information Service NRM Network Resource Model UMTS Universal Mobile Telecommunications System UTRAN Universal

43、 Terrestrial Radio Access Network XML eXtensible Markup Language 4 Structure and content of configuration data XML files The overall description of the file format of configuration data XML files is provided by 3GPP TS 32.615 3. Annex A of the present document defines the NRM-specific XML schema Rep

44、eaterNrm.xsd for the Repeater Network Resources IRP NRM defined in 3GPP TS 32.722 1. XML schema RepeaterNrm.xsd explicitly declares NRM-specific XML element types for the related NRM. The definition of those NRM-specific XML element types complies with the generic mapping rules defined in 3GPP TS 32

45、.615 3. ETSI ETSI TS 132 725 V8.0.1 (2011-10)83GPP TS 32.725 version 8.0.1 Release 8Annex A (normative): Configuration data file NRM-specific XML schema (file name “RepeaterNrm.xsd“) The following XML schema RepeaterNrm.xsd is the NRM-specific schema for the Repeater Network Resources IRP NRM define

46、d in 3GPP TS 32.722 1: ETSI ETSI TS 132 725 V8.0.1 (2011-10)93GPP TS 32.725 version 8.0.1 Release 8ETSI ETSI TS 132 725 V8.0.1 (2011-10)103GPP TS 32.725 version 8.0.1 Release 8Annex B (informative): XML schema electronic files The electronic files corresponding to the normative XML schemas defined i

47、n the present document are available in native form in the following archive: http:/www.3gpp.org/ftp/specs/archive/32_series/32.725/schema/32725-800-XMLSchema.zip ETSI ETSI TS 132 725 V8.0.1 (2011-10)113GPP TS 32.725 version 8.0.1 Release 8Annex C (informative): Change history Change history Date TS

48、G # TSG Doc. CR R Subject/Comment Cat Old New Sep 2006 SA_33 SP-060561 - - Submitted to TSG SA #33 for Information - 1.0.0 Dec 2006 SA_34 SP-060748 - - Submitted to TSG SA #34 for Approval. - 2.0.0 7.0.0 Jun 2008 SA_40 SP-080328 0001 - Correction of namespace to align with configData.xsd of 32.615 F

49、 7.0.0 7.1.0 Dec 2008 SA_42 - - - Upgrade to Release 8 - 7.1.0 8.0.0 Sep 2011 - - - Correction of typo in version shown on cover - 8.0.0 8.0.1 ETSI ETSI TS 132 725 V8.0.1 (2011-10)123GPP TS 32.725 version 8.0.1 Release 8History Document history V8.0.1 October 2011 Publication V8.1.0 January 2009 Publication