ETSI TS 132 745-2010 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Telecommunication management Configuration Manageme.pdf

1、 ETSI TS 132 745 V9.0.0 (2010-01)Technical Specification Digital cellular telecommunications system (Phase 2+);Universal Mobile Telecommunications System (UMTS);LTE;Telecommunication management;Configuration Management (CM);Signalling Transport Network (STN) interfaceNetwork Resource Model (NRM) Int

2、egration Reference Point (IRP);Bulk CM eXtensible Markup Language (XML) file format definition(3GPP TS 32.745 version 9.0.0 Release 9)ETSI ETSI TS 132 745 V9.0.0 (2010-01)13GPP TS 32.745 version 9.0.0 Release 9Reference RTS/TSGS-0532745v900 Keywords GSM, LTE, UMTS ETSI 650 Route des Lucioles F-06921

3、 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.o

4、rg The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ET

5、SI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.ets

6、i.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoi

7、ng restriction extend to reproduction in all media. European Telecommunications Standards Institute 2010. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI re

8、gistered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI

9、TS 132 745 V9.0.0 (2010-01)23GPP TS 32.745 version 9.0.0 Release 9Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-me

10、mbers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/hom

11、e.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the

12、 present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as bein

13、g references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. ETSI ETSI TS 132 745 V9.0.0 (2010-01)33GPP TS 32.745 version 9.0.0 Release 9Contents Intellectual Property Rights 2g3Forewo

14、rd . 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 7g34 Structure and content of configuration data XML files 7g3Annex A (normative): Configuration data file NRM-specific XML schema (file name “stnNrm.xsd“) 8g3

15、Annex B (informative): Void . 13g3Annex C (informative): Change history . 14g3History 15g3ETSI ETSI TS 132 745 V9.0.0 (2010-01)43GPP TS 32.745 version 9.0.0 Release 9Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present d

16、ocument are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z whe

17、re: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is

18、incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project: Technical Specification Group Services and System Aspects; Telecommunication management, as identified below: 32.74

19、1: Configuration Management (CM); Signalling Transport Network (STN) interface Network Resource Model (NRM) Integration Reference Point (IRP); Requirements 32.742: Configuration Management (CM); Signalling Transport Network (STN) interface Network Resource Model (NRM) Integration Reference Point (IR

20、P); Information Service (IS) 32.743: Configuration Management (CM); Signalling Transport Network (STN) interface Network Resource Model (NRM) Integration Reference Point (IRP); Common Object Request Broker Architecture (CORBA) Solution Set (SS) 32.745: Configuration Management (CM); Signalling Trans

21、port Network (STN) interface Network Resource Model (NRM) Integration Reference Point (IRP); eXtensible Markup Language (XML) file format definition Configuration Management (CM), in general, provides the operator with the ability to assure correct and effective operation of the 3G network as it evo

22、lves. CM actions have the objective to control and monitor the actual configuration on the Network Elements (NEs) and Network Resources (NRs), and they may be initiated by the operator or by functions in the Operations Systems (OSs) or NEs. CM actions may be requested as part of an implementation pr

23、ogramme (e.g. additions and deletions), as part of an optimisation programme (e.g. modifications), and to maintain the overall Quality of Service (QoS). The CM actions are initiated either as single actions on single NEs of the 3G network, or as part of a complex procedure involving actions on many

24、resources/objects in one or several NEs. ETSI ETSI TS 132 745 V9.0.0 (2010-01)53GPP TS 32.745 version 9.0.0 Release 91 Scope The present document provides the NRM-specific part related to the STN Network Resources IRP NRM in 32.742 1 of the XML file format definition for the Bulk Configuration Manag

25、ement IRP IS (TS 32.612 2). The main part of this XML file format definition is provided by 3GPP TS 32.615 3. Bulk CM XML file formats are based on XML 4, XML Schema 5 6 7 and XML Namespace 8 specifications. This File Format Definition specification is related to 3GPP TS 32.742 V9.0.X. 2 References

26、The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do

27、 not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 32.742: “Telecommun

28、ication management; Configuration Management (CM); Signalling Transport Network (STN) interface Network Resource Model (NRM) Integration Reference Point (IRP); Information Service (IS)“. 2 3GPP TS 32.612: “Telecommunication management; Configuration Management (CM); Bulk CM Integration Reference Poi

29、nt (IRP): Information Service (IS)“. 3 3GPP TS 32.615: “Telecommunication management; Configuration Management (CM); Bulk CM Integration Reference Point (IRP): eXtensible Markup Language (XML) file format definition“. 4 W3C REC-xml-20001006: “Extensible Markup Language (XML) 1.0 (Second Edition)“. 5

30、 W3C REC-xmlschema-0-20010502: “XML Schema Part 0: Primer“. 6 W3C REC-xmlschema-1-20010502: “XML Schema Part 1: Structures“. 7 W3C REC-xmlschema-2-20010502: “XML Schema Part 2: Datatypes“. 8 W3C REC-xml-names-19990114: “Namespaces in XML“. 3 Definitions and abbreviations 3.1 Definitions For the purp

31、oses of the present document, the following terms and definitions apply: XML file: file containing an XML document XML document: composed of the succession of an optional XML declaration followed by a root XML element NOTE: See 4; in the scope of the present document. XML declaration: it specifies t

32、he version of XML being used ETSI ETSI TS 132 745 V9.0.0 (2010-01)63GPP TS 32.745 version 9.0.0 Release 9NOTE: See 4. XML element: has a type, is identified by a name, may have a set of XML attribute specifications and is either composed of the succession of an XML start-tag followed by the XML cont

33、ent of the XML element followed by an XML end-tag, or composed simply of an XML empty-element tag; each XML element may contain other XML elements NOTE: See 4. empty XML element: having an empty XML content; an empty XML element still possibly has a set of XML attribute specifications; an empty XML

34、element is either composed of the succession of an XML start-tag directly followed by an XML end-tag, or composed simply of an XML empty-element tag NOTE: See 4. XML content (of an XML element): empty if the XML element is simply composed of an XML empty-element tag; otherwise the part, possibly emp

35、ty, of the XML element between its XML start-tag and its XML end-tag XML start-tag: the beginning of a non-empty XML element is marked by an XML start-tag containing the name and the set of XML attribute specifications of the XML element NOTE: See 4. XML end-tag: the end of a non-empty XML element i

36、s marked by an XML end-tag containing the name of the XML element NOTE: See 4. XML empty-element tag: composed simply of an empty-element tag containing the name and the set of XML attribute specifications of the XML element. NOTE: See 4. XML attribute specification: has a name and a value NOTE: See

37、 4. DTD: defines structure and content constraints to be respected by an XML document to be valid with regard to this DTD NOTE: See 4. XML schema: more powerful than a DTD, an XML schema defines structure and content constraints to be respected by an XML document to conform with this XML schema; thr

38、ough the use of XML namespaces several XML schemas can be used together by a single XML document; an XML schema is itself also an XML document that shall conform with the XML schema for XML schemas NOTE: See 5, 6 and 7. XML namespace: enables qualifying element and attribute names used in XML docume

39、nts by associating them with namespaces identified by different XML schemas NOTE: See 8, in the scope of the present document. XML complex type: defined in an XML schema; cannot be directly used in an XML document; can be the concrete type or the derivation base type for an XML element type or for a

40、nother XML complex type; ultimately defines constraints for an XML element on its XML attribute specifications and/or its XML content NOTE: See 5, 6 and 7. XML element type: declared by an XML schema; can be directly used in an XML document; as the concrete type of an XML element, directly or indire

41、ctly defines constraints on its XML attribute specifications and/or its XML content; can also be the concrete type or the derivation base type for another XML element type NOTE: See 5, 6 and 7. ETSI ETSI TS 132 745 V9.0.0 (2010-01)73GPP TS 32.745 version 9.0.0 Release 93.2 Abbreviations For the purp

42、oses of the present document, the following abbreviations apply: CM Configuration Management DTD Document Type Definition IRP Integration Reference Point IS Information Service NRM Network Resource Model STN Signalling Transport Network UMTS Universal Mobile Telecommunications System UTRAN Universal

43、 Terrestrial Radio Access Network XML eXtensible Markup Language 4 Structure and content of configuration data XML files The overall description of the file format of configuration data XML files is provided by 3GPP TS 32.615 3. Annex A defines the NRM-specific XML schema stnNrm.xsd for the STN Netw

44、ork Resources IRP NRM defined in 3GPP TS 32.742 1. XML schema stnNrm.xsd explicitly declares NRM-specific XML element types for the related NRM. The definition of those NRM-specific XML element types complies with the generic mapping rules defined in 3GPP TS 32.615 3. ETSI ETSI TS 132 745 V9.0.0 (20

45、10-01)83GPP TS 32.745 version 9.0.0 Release 9Annex A (normative): Configuration data file NRM-specific XML schema (file name “stnNrm.xsd“) The following XML schema stnNrm.xsd is the NRM-specific schema for the STN Network Resources IRP NRM defined in 3GPP TS 32.742 1: ETSI ETSI TS 132 745 V9.0.0 (20

46、10-01)93GPP TS 32.745 version 9.0.0 Release 9ETSI ETSI TS 132 745 V9.0.0 (2010-01)103GPP TS 32.745 version 9.0.0 Release 9ETSI ETSI TS 132 745 V9.0.0 (2010-01)113GPP TS 32.745 version 9.0.0 Release 9ETSI ETSI TS 132 745 V9.0.0 (2010-01)123GPP TS 32.745 version 9.0.0 Release 9ETSI ETSI TS 132 745 V9.

47、0.0 (2010-01)133GPP TS 32.745 version 9.0.0 Release 9Annex B (informative): Void ETSI ETSI TS 132 745 V9.0.0 (2010-01)143GPP TS 32.745 version 9.0.0 Release 9Annex C (informative): Change history Change history Date TSG # TSG Doc. CR Rev Subject/Comment Cat Old New Dec 2004 SA_26 SP-040820 - - Submi

48、tted to SA#26 for Approval - 1.0.0 6.0.0 Dec 2005 SA_30 SP-050720 0001 - Correct definition of linkTpStatus in XML Schema - Align with 32.742 (ITU-T Q.751.1) F 6.0.0 6.1.0 Dec 2005 SA_30 SP-050719 0002 - Correct inconsistency of MtpSignPoint in XML schema - Align with IS in 32.742 F 6.0.0 6.1.0 Mar

49、2006 SA_31 SP-060104 0003 - Correct the linkTpStatus definition in XML F 6.1.0 6.2.0 Sep 2006 SA_33 SP-060538 0004 - Deletion of relatedObjects attribute in MTPSignPoint - Align with 32.742 Signalling Transport Network interface NRM IRP Information Service F 6.2.0 6.3.0 Sep 2006 SA_33 SP-060554 0005 - Add M3UA related information in STN NRM XML file format definition B 6.3.0 7.0.0 Mar 2007 - - - - Delete reference to the 32.744 CMIP SS. Reason: SA#35 endorsed the SA5 decision to no