ETSI TS 134 124-2016 Universal Mobile Telecommunications System (UMTS) Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillary equipment (V13 0 0 3GPP T.pdf

1、 ETSI TS 1Universal Mobile TelElectromagnetic cfor mobile term(3GPP TS 34.1TECHNICAL SPECIFICATION134 124 V13.0.0 (2016elecommunications System (compatibility (EMC) requiremrminals and ancillary equipme.124 version 13.0.0 Release 1316-01) (UMTS); ements ent 13) ETSI ETSI TS 134 124 V13.0.0 (2016-01)

2、13GPP TS 34.124 version 13.0.0 Release 13Reference RTS/TSGR-0434124vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de

3、Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified

4、 without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users

5、 of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your commen

6、t to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The

7、 content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Tr

8、ade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 134 124 V13.0.0 (2016-

9、01)23GPP TS 34.124 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foun

10、d in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Pol

11、icy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Tec

12、hnical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ET

13、SI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to

14、be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 124 V13.0.0 (2016-01)33GPP TS 34.124 version 13.0.0 Release 13Content

15、s Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 9g34 Test conditions . 10g34.1 General . 10g34.2 Arrangements for establishing a communication link 10g34.3

16、Narrow band responses on receivers 11g34.3.1 FDD and 3.84Mcps TDD option 11g34.3.2 1,28Mcps TDD option 11g34.3.3 7,68Mcps TDD option 11g34.4 Receiver exclusion band . 12g35 Performance assessment . 13g35.1 General . 13g35.2 Equipment which can provide a continuous communication link 13g35.3 Equipmen

17、t which can only provide a discontinuous communication link (packet data/transmission). 13g35.4 Equipment which does not provide a communication link . 13g35.5 Conformance of ancillary equipment . 14g35.6 Equipment classification 14g36 Performance criteria . 14g36.1 Performance criteria for continuo

18、us phenomena 14g36.2 Performance criteria for Transient phenomena 15g37 Applicability overview tables . 15g37.1 Emission . 15g37.2 Immunity 16g38 Methods of measurement and limits for EMC emissions 16g38.1 Test configurations . 16g38.2 Radiated Emission 17g38.2.1 Definition 17g38.2.2 Test method 17g

19、38.2.3 Limits 17g38.2.3.1 FDD and 3.84 Mcps TDD option 17g38.2.3.2 1,28 Mcps TDD option . 18g38.2.3.3 7,68 Mcps TDD option . 18g38.2.4 Interpretation of the measurement results 19g38.3 Conducted emission DC power input/output port 19g38.3.1 Definition 19g38.3.2 Test method 19g38.3.3 Limits 20g38.4 C

20、onducted emissions, AC mains power input/output port . 20g38.4.1 Definition 20g38.4.2 Test method 20g38.4.3 Limits 20g38.5 Harmonic current emissions (AC mains input port) . 21g38.6 Voltage fluctuations and flicker (AC mains input port) . 21g3ETSI ETSI TS 134 124 V13.0.0 (2016-01)43GPP TS 34.124 ver

21、sion 13.0.0 Release 139 Test methods and levels for immunity tests . 21g39.1 Test configurations . 21g39.2 RF electromagnetic field (80 MHz - 1000 MHz and 1400 MHZ to 2700 MHz) 22g39.2.1 Definition 22g39.2.2 Test method and level . 22g39.2.3 Performance criteria 22g39.3 Electrostatic discharge 22g39

22、.3.1 Definition 22g39.3.2 Test method and level . 22g39.3.3 Performance criteria 23g39.4 Fast transients common mode 23g39.4.1 Definition 23g39.4.2 Test method and level . 23g39.4.3 Performance criteria 23g39.5 RF common mode (0.15 MHz to 80 MHz) 23g39.5.1 Definition 23g39.5.2 Test method and level

23、. 24g39.5.3 Performance criteria 24g39.6 Transients and surges, vehicular environment 24g39.6.1 Definition 24g39.6.2 Test method and level . 24g39.6.2.1 12 V DC powered equipment 24g39.6.2.2 24 V DC powered equipment 25g39.6.3 Performance criteria 25g39.7 Voltage dips and interruptions 25g39.7.1 Def

24、inition 25g39.7.2 Test method and level . 25g39.7.3 Performance criteria 26g39.8 Surges, common and differential mode 26g39.8.1 Definition 26g39.8.2 Test method and level . 26g39.8.3 Performance criteria 26g3Annex A (normative): Performance assessment voice call. Audio break through . 27g3A.1 Calibr

25、ation of audio levels . 27g3A.2 Measurement of audio levels 28g3Annex B (normative): Performance assessment of data transfer call. Error Ratios . 29g3B.1 Calibration of data transfer . 29g3B.2 Derivation of Error Ratios 29g3B.3 EUT without data application ancillary 29g3B.4 EUT with data application

26、 ancillary . 30g3Annex C (informative): Change History 31g3History 32g3ETSI ETSI TS 134 124 V13.0.0 (2016-01)53GPP TS 34.124 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subj

27、ect to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first

28、digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when

29、 editorial only changes have been incorporated in the document. ETSI ETSI TS 134 124 V13.0.0 (2016-01)63GPP TS 34.124 version 13.0.0 Release 131 Scope The present document establishes the essential EMC requirements for “3rdgeneration“ digital cellular mobile terminal equipment and ancillary accessor

30、ies in combination with a 3GPP user equipment (UE). The equipment conforming to the requirements laid out in the present document and used in its intended electromagnetic environment in accordance with the manufacturers instructions - shall not generate electromagnetic disturbances at a level .which

31、 may interfere with the intended operation of other equipment; - has an adequate level of intrinsic immunity to electromagnetic disturbances to operate as intended; The present document specifies the applicable EMC tests, the methods of measurement, the frequency range, the limits and the minimum pe

32、rformance criteria for all types of UTRA UEs operating in FDD or TDD modes and their accessories. The TDD has two options. The two options are the 3,84Mcps and 1,28Mcps options respectively. The requirements are listed in different subsections only if the parameters deviate.Base station equipment op

33、erating within network infrastructure is outside the scope of the present document. However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed location while connected to the AC mains. Base stations in the radio access network are covered by the

34、 technical specification TS25.113 1. Requirements for the radiated emission from the enclosure port of integral antenna equipment and ancillaries have been included. Technical specifications for conducted emissions from the antenna connector are found in the 3GPP specifications for the radio interfa

35、ce, e.g. TS34.121 2 and TS34.122 3, for the effective use of the radio spectrum. The immunity requirements have been selected to ensure an adequate level of compatibility for apparatus in residential, commercial, light industrial and vehicular environments. The levels however, do not cover extreme c

36、ases, which may occur in any location but with low probability of occurrence. The environment classification used in the present document refers to the environment classification used in the Generic Standards IEC 61000-6-1 4, IEC 61000-6-3 5, except the vehicular environment class which refers to IS

37、O 7637 Part 1 6 and Part 2 7. Compliance of radio equipment to the requirements of the present document does not signify compliance to any requirement related to the use of the equipment (i.e. licensing requirements). Compliance to the requirements of the present document does not signify compliance

38、 to any safety requirement. However, any temporary or permanent unsafe condition caused by EMC is considered as non-compliance. 2 References The following documents contain provisions, which, through reference in this text, constitute provisions of the present document. References are either specifi

39、c (identified by date of publication, edition number, version number, etc.) or non-specific; for a specific reference, subsequent revisions do not apply; for a non-specific reference, subsequent revisions do apply. In the case of a reference to a 3GPP document (including a GSM document), a non-speci

40、fic reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 25.113: “Base station and repeater electromagnetic compatibility (EMC)“. 2 3GPP TS 34.121: “Terminal conformance specification, Radio transmission and reception (FDD)“. 3 3GP

41、P TS 34.122: “Terminal conformance specification, Radio transmission and reception (TDD)“. 4 IEC 61000-6-1 (1997): “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity standard for residential, commercial and light-industrial environments“. ETSI ETSI TS 134 124 V13.

42、0.0 (2016-01)73GPP TS 34.124 version 13.0.0 Release 135 IEC 61000-6-3 (1996): “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments. 6 ISO 7637-1 (1990): “Road vehicles - Electrical disturbance by

43、 conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only“. 7 ISO 7637-2 (1990): “Road vehicles - Electrical disturbance by conduction and coupling - Part 2: Commercial vehicles with nomi

44、nal 24 V supply voltage - Electrical transient conduction along supply lines only“. 8 3GPP TR 25.990: “Vocabulary for UTRAN“. 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 9 IEC 60050(161): “International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility“. 10 3GPP TS 3

45、4.108: “Common test environments for User Equipment (UE); Conformance testing“. 11 ITU-R Recommendation SM.329: “Unwanted emissions in the spurious domain “. 12 3GPP TS 25.101: “User Equipment (UE) radio transmission and reception (FDD)“. 13 3GPP TS 25.102: “User Equipment (UE) radio transmission an

46、d reception (TDD)“. 14 IEC CISPR publication 22: “Information technology equipment; Radio disturbance characteristics - Limits and methods of measurement“. 15 3GPP TS 34.109: “Terminal logical test interface; Special conformance testing functions“. 16 IEC CISPR publication 16-1: “Specification for r

47、adio disturbance and immunity measuring apparatus and methods“. 17 IEC 61000-3-2; (2000): “Electromagnetic compatibility; Part 3 - Limits; section 2 - Limits for harmonic current emissions (equipment input current 16 A per phase)“; Am.1 (1997-09)“. 18 IEC 61000-3-3; (19952): “Electromagnetic compati

48、bility; Part 3 - Limits; section 2 - Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A“ 19 IEC 61000-4-2: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 2: Electrostatic discharge immunity t

49、est - Basic EMC publication“. 20 IEC 61000-4-3: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 3: Radiated, radio-frequency electromagnetic field immunity test“. 21 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 4: Electrical fast transient/burst immunity test - Basic EMC publication“. 22 IEC 61000-4-5: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 5: Surge im