ETSI TS 134 124-2017 Universal Mobile Telecommunications System (UMTS) Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillary equipment (V14 0 0 3GPP T.pdf

1、 ETSI TS 134 124 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillary equipment (3GPP TS 34.124 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 134 124 V14.0.0 (2017-04)13GPP TS 34.124

2、 version 14.0.0 Release 14Reference RTS/TSGR-0434124ve00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7

3、803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the pr

4、ior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present

5、 document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to

6、one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The cont

7、ent of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade M

8、arks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the G

9、SM Association. ETSI ETSI TS 134 124 V14.0.0 (2017-04)23GPP TS 34.124 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly availabl

10、e for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (

11、https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, e

12、ssential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be inte

13、rpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need n

14、ot“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 124 V14.0.0 (2017-

15、04)33GPP TS 34.124 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 9g34 Test conditions . 10g34.1 General . 10g34.2 Arrangem

16、ents for establishing a communication link 10g34.3 Narrow band responses on receivers 11g34.3.1 FDD and 3.84Mcps TDD option 11g34.3.2 1,28Mcps TDD option 11g34.3.3 7,68Mcps TDD option 11g34.4 Receiver exclusion band . 12g35 Performance assessment . 13g35.1 General . 13g35.2 Equipment which can provi

17、de a continuous communication link 13g35.3 Equipment which can only provide a discontinuous communication link (packet data/transmission). 13g35.4 Equipment which does not provide a communication link . 13g35.5 Conformance of ancillary equipment . 14g35.6 Equipment classification 14g36 Performance c

18、riteria . 14g36.1 Performance criteria for continuous phenomena 14g36.2 Performance criteria for Transient phenomena 15g37 Applicability overview tables . 15g37.1 Emission . 15g37.2 Immunity 16g38 Methods of measurement and limits for EMC emissions 16g38.1 Test configurations . 16g38.2 Radiated Emis

19、sion 17g38.2.1 Definition 17g38.2.2 Test method 17g38.2.3 Limits 17g38.2.3.1 FDD and 3.84 Mcps TDD option 17g38.2.3.2 1,28 Mcps TDD option . 18g38.2.3.3 7,68 Mcps TDD option . 18g38.2.4 Interpretation of the measurement results 19g38.3 Conducted emission DC power input/output port 19g38.3.1 Definiti

20、on 19g38.3.2 Test method 19g38.3.3 Limits 20g38.4 Conducted emissions, AC mains power input/output port . 20g38.4.1 Definition 20g38.4.2 Test method 20g38.4.3 Limits 20g38.5 Harmonic current emissions (AC mains input port) . 21g38.6 Voltage fluctuations and flicker (AC mains input port) . 21g39 Test

21、 methods and levels for immunity tests . 21g3ETSI ETSI TS 134 124 V14.0.0 (2017-04)43GPP TS 34.124 version 14.0.0 Release 149.1 Test configurations . 21g39.2 RF electromagnetic field (80 MHz - 1000 MHz and 1400 MHZ to 2700 MHz) 22g39.2.1 Definition 22g39.2.2 Test method and level . 22g39.2.3 Perform

22、ance criteria 22g39.3 Electrostatic discharge 22g39.3.1 Definition 22g39.3.2 Test method and level . 22g39.3.3 Performance criteria 23g39.4 Fast transients common mode 23g39.4.1 Definition 23g39.4.2 Test method and level . 23g39.4.3 Performance criteria 23g39.5 RF common mode (0.15 MHz to 80 MHz) 23

23、g39.5.1 Definition 23g39.5.2 Test method and level . 24g39.5.3 Performance criteria 24g39.6 Transients and surges, vehicular environment 24g39.6.1 Definition 24g39.6.2 Test method and level . 24g39.6.2.1 12 V DC powered equipment 24g39.6.2.2 24 V DC powered equipment 25g39.6.3 Performance criteria 2

24、5g39.7 Voltage dips and interruptions 25g39.7.1 Definition 25g39.7.2 Test method and level . 25g39.7.3 Performance criteria 26g39.8 Surges, common and differential mode 26g39.8.1 Definition 26g39.8.2 Test method and level . 26g39.8.3 Performance criteria 26g3Annex A (normative): Performance assessme

25、nt voice call. Audio break through . 27g3A.1 Calibration of audio levels . 27g3A.2 Measurement of audio levels 28g3Annex B (normative): Performance assessment of data transfer call. Error Ratios . 29g3B.1 Calibration of data transfer . 29g3B.2 Derivation of Error Ratios 29g3B.3 EUT without data appl

26、ication ancillary 29g3B.4 EUT with data application ancillary . 30g3Annex C (informative): Change History 31g3History 32g3ETSI ETSI TS 134 124 V14.0.0 (2017-04)53GPP TS 34.124 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3

27、GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version n

28、umber as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,

29、updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 134 124 V14.0.0 (2017-04)63GPP TS 34.124 version 14.0.0 Release 141 Scope The present document establishes the essential EMC requirements for “3rdgeneration“ digital cellul

30、ar mobile terminal equipment and ancillary accessories in combination with a 3GPP user equipment (UE). The equipment conforming to the requirements laid out in the present document and used in its intended electromagnetic environment in accordance with the manufacturers instructions - shall not gene

31、rate electromagnetic disturbances at a level .which may interfere with the intended operation of other equipment; - has an adequate level of intrinsic immunity to electromagnetic disturbances to operate as intended; The present document specifies the applicable EMC tests, the methods of measurement,

32、 the frequency range, the limits and the minimum performance criteria for all types of UTRA UEs operating in FDD or TDD modes and their accessories. The TDD has two options. The two options are the 3,84Mcps and 1,28Mcps options respectively. The requirements are listed in different subsections only

33、if the parameters deviate.Base station equipment operating within network infrastructure is outside the scope of the present document. However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed location while connected to the AC mains. Base stat

34、ions in the radio access network are covered by the technical specification TS25.113 1. Requirements for the radiated emission from the enclosure port of integral antenna equipment and ancillaries have been included. Technical specifications for conducted emissions from the antenna connector are fou

35、nd in the 3GPP specifications for the radio interface, e.g. TS34.121 2 and TS34.122 3, for the effective use of the radio spectrum. The immunity requirements have been selected to ensure an adequate level of compatibility for apparatus in residential, commercial, light industrial and vehicular envir

36、onments. The levels however, do not cover extreme cases, which may occur in any location but with low probability of occurrence. The environment classification used in the present document refers to the environment classification used in the Generic Standards IEC 61000-6-1 4, IEC 61000-6-3 5, except

37、 the vehicular environment class which refers to ISO 7637 Part 1 6 and Part 2 7. Compliance of radio equipment to the requirements of the present document does not signify compliance to any requirement related to the use of the equipment (i.e. licensing requirements). Compliance to the requirements

38、of the present document does not signify compliance to any safety requirement. However, any temporary or permanent unsafe condition caused by EMC is considered as non-compliance. 2 References The following documents contain provisions, which, through reference in this text, constitute provisions of

39、the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific; for a specific reference, subsequent revisions do not apply; for a non-specific reference, subsequent revisions do apply. In the case of a reference to a 3G

40、PP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 25.113: “Base station and repeater electromagnetic compatibility (EMC)“. 2 3GPP TS 34.121: “Terminal conformance specificat

41、ion, Radio transmission and reception (FDD)“. 3 3GPP TS 34.122: “Terminal conformance specification, Radio transmission and reception (TDD)“. 4 IEC 61000-6-1 (1997): “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity standard for residential, commercial and light-

42、industrial environments“. ETSI ETSI TS 134 124 V14.0.0 (2017-04)73GPP TS 34.124 version 14.0.0 Release 145 IEC 61000-6-3 (1996): “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments. 6 ISO 7637-1

43、 (1990): “Road vehicles - Electrical disturbance by conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only“. 7 ISO 7637-2 (1990): “Road vehicles - Electrical disturbance by conduction a

44、nd coupling - Part 2: Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only“. 8 3GPP TR 25.990: “Vocabulary for UTRAN“. 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 9 IEC 60050(161): “International Electrotechnical Vocabulary - Chapte

45、r 161: Electromagnetic compatibility“. 10 3GPP TS 34.108: “Common test environments for User Equipment (UE); Conformance testing“. 11 ITU-R Recommendation SM.329: “Unwanted emissions in the spurious domain “. 12 3GPP TS 25.101: “User Equipment (UE) radio transmission and reception (FDD)“. 13 3GPP TS

46、 25.102: “User Equipment (UE) radio transmission and reception (TDD)“. 14 IEC CISPR publication 22: “Information technology equipment; Radio disturbance characteristics - Limits and methods of measurement“. 15 3GPP TS 34.109: “Terminal logical test interface; Special conformance testing functions“.

47、16 IEC CISPR publication 16-1: “Specification for radio disturbance and immunity measuring apparatus and methods“. 17 IEC 61000-3-2; (2000): “Electromagnetic compatibility; Part 3 - Limits; section 2 - Limits for harmonic current emissions (equipment input current 16 A per phase)“; Am.1 (1997-09)“.

48、18 IEC 61000-3-3; (19952): “Electromagnetic compatibility; Part 3 - Limits; section 2 - Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A“ 19 IEC 61000-4-2: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniq

49、ues - section 2: Electrostatic discharge immunity test - Basic EMC publication“. 20 IEC 61000-4-3: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 3: Radiated, radio-frequency electromagnetic field immunity test“. 21 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 4: Electrical fast transient/burst immunity test - Basic EMC publication“. 22 IEC 61000-4-5: “Electromagnetic compatibility (EMC) - Part 4: Testi