ETSI TS 136 112-2017 LTE Location Measurement Unit (LMU) conformance specification Network based positioning systems in Evolved Universal Terrestrial Radio Access Network (E-UTRAN).pdf

1、 ETSI TS 136 112 V14.0.0 (2017-04) LTE; Location Measurement Unit (LMU) conformance specification; Network based positioning systems in Evolved Universal Terrestrial Radio Access Network (E-UTRAN) (3GPP TS 36.112 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 136 112 V14.0.0 (2017-0

2、4)13GPP TS 36.112 version 14.0.0 Release 14Reference RTS/TSGR-0436112ve00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de

3、 Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modifie

4、d without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. User

5、s of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send

6、your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission o

7、f ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI

8、logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered an

9、d owned by the GSM Association. ETSI ETSI TS 136 112 V14.0.0 (2017-04)23GPP TS 36.112 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is p

10、ublicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the E

11、TSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be,

12、or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. Thes

13、e should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“

14、, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 11

15、2 V14.0.0 (2017-04)33GPP TS 36.112 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 8g33.3 Abbreviations . 9g34 General Test

16、 Conditions and Declarations . 9g34.1 Measurement uncertainties and test requirements 9g34.1.1 General 9g34.1.2 Acceptable uncertainty of Test System . 9g34.1.2.1 Measurement of receiver . 9g34.1.2.2 Measurement time requirement . 14g34.1.2.3 Measurement of performance requirement . 14g34.2 LMU clas

17、ses . 14g34.3 Regional requirements 14g34.4 Selection of configurations for testing 14g34.5 LMU configurations . 14g34.6 Manufacturers declarations of regional requirements . 16g34.6.1 Operating band and frequency range 16g34.6.2 Channel bandwidth . 16g34.6.3 Co-location with base stations in other

18、bands . 16g34.6.4 Manufacturers declarations of supported RF configurations . 17g34.7 Specified frequency range and supported channel bandwidth 17g34.7.1 RF bandwidth position for non-single carrier testing . 17g34.7.2 Aggregated channel bandwidth position for CA specific testing 18g34.8 Format and

19、interpretation of tests . 18g35 Operating Bands and Channel Arrangement 19g35.1 General . 19g35.2 Operating bands 19g35.3 Channel bandwidth . 21g35.4 Channel arrangement 22g35.4.1 Channel spacing 22g35.4.2 CA Channel spacing . 22g35.4.3 Channel raster . 22g35.4.4 Carrier frequency and EARFCN . 23g35

20、.5 Requirements for contiguous spectrum 24g36 Conformance Tests for LMU RF Requirements 25g36.1 General . 25g36.2 Reference sensitivity level 25g36.2.1 Definition and applicability 25g36.2.2 Minimum requirement 25g36.2.3 Test Purpose 25g36.2.4 Method of testing 25g36.2.4.1 Initial conditions . 25g36

21、.2.4.2 Procedure 25g36.2.5 Test requirement . 25g36.3 Dynamic range . 26g36.3.1 Definition and applicability 26g3ETSI ETSI TS 136 112 V14.0.0 (2017-04)43GPP TS 36.112 version 14.0.0 Release 146.3.2 Minimum Requirement . 26g36.3.3 Test purpose 26g36.3.4 Method of testing 26g36.3.4.1 Initial condition

22、s . 26g36.3.4.2 Procedure 26g36.3.5 Test Requirements 27g36.4 In-channel selectivity . 27g36.4.1 Definition and applicability 27g36.4.2 Minimum Requirement . 27g36.4.3 Test purpose 27g36.4.4 Method of testing 27g36.4.4.1 Initial conditions . 27g36.4.4.2 Procedure 28g36.4.5 Test Requirements 28g36.5

23、Adjacent channel selectivity (ACS) and narrow-band blocking. 28g36.5.1 Definition and applicability 28g36.5.2 Minimum Requirement . 28g36.5.3 Test purpose 29g36.5.4 Method of test . 29g36.5.4.1 Initial conditions . 29g36.5.4.2 Procedure 29g36.5.4.3 Procedure for narrow-band blocking . 29g36.5.5 Test

24、 Requirements 29g36.6 Blocking . 30g36.6.1 Definition and applicability 30g36.6.2 Minimum Requirements . 30g36.6.3 Test purpose 31g36.6.4 Method of test . 31g36.6.4.1 Initial conditions . 31g36.6.4.2 Procedure 31g36.6.5 Test Requirements 31g36.7 Receiver spurious emissions. 32g36.7.1 Definition and

25、applicability 32g36.7.2 Minimum Requirements . 33g36.7.3 Test purpose 33g36.7.4 Method of test . 33g36.7.4.1 Initial conditions . 33g36.7.4.2 Procedure 33g36.7.5 Test requirements 33g36.8 Receiver intermodulation . 34g36.8.1 Definition and applicability 34g36.8.2 Minimum Requirement . 34g36.8.3 Test

26、 purpose 34g36.8.4 Method of test . 34g36.8.4.1 Initial conditions . 34g36.8.4.2 Procedures . 34g36.8.5 Test requirements 34g37 Conformance Tests for UL RTOA Measurement Time Requirements 35g37.1 General . 35g37.2 Requirements for FDD without DRX . 35g37.2.1 Definition and applicability 35g37.2.2 Mi

27、nimum requirement 35g37.2.3 Test Purpose 35g37.2.4 Method of testing 35g37.2.4.1 Initial conditions . 35g37.2.4.2 Procedure 36g37.2.5 Test requirement . 36g37.3 Requirements for TDD without DRX 36g37.3.1 Definition and applicability 36g37.3.2 Minimum requirement 37g37.3.3 Test Purpose 37g3ETSI ETSI

28、TS 136 112 V14.0.0 (2017-04)53GPP TS 36.112 version 14.0.0 Release 147.3.4 Method of testing 37g37.3.4.1 Initial conditions . 37g37.3.4.2 Procedure 37g37.3.5 Test requirement . 37g37.4 UL RTOA Measurements upon Receiving SRS Configuration Update . 38g37.4.1 Definition and applicability 38g37.4.2 Min

29、imum requirement 38g37.4.3 Test Purpose 38g37.4.4 Method of testing 38g37.4.4.1 Initial conditions . 38g37.4.4.2 Procedure 38g37.4.5 Test requirement . 38g38 Conformance Tests for UL RTOA Measurement Accuracy Requirements . 41g38.1 General . 41g38.2 UL RTOA measurement accuracy for a UE not configur

30、ed with CA 41g38.2.1 Definition and applicability 41g38.2.2 Minimum requirement 41g38.2.3 Test Purpose 41g38.2.4 Method of testing 42g38.2.4.1 Initial conditions . 42g38.2.4.2 Procedure 42g38.2.5 Test requirement . 42g38.3 UL RTOA measurement accuracy for a UE configured with CA 42g38.3.1 Definition

31、 and applicability 42g38.3.2 Minimum requirement 43g38.3.3 Test Purpose 43g38.3.4 Method of testing 43g38.3.4.1 Initial conditions . 43g38.3.4.2 Procedure 43g38.3.5 Test requirement . 43g38.4 Parallel UL RTOA measurements on the same carrier frequency 44g38.4.1 Definition and applicability 44g38.4.2

32、 Minimum requirement 44g38.4.3 Test Purpose 44g38.4.4 Method of testing 44g38.4.4.1 Initial conditions . 44g38.4.4.2 Procedure 45g38.4.5 Test requirement . 45g38.5 Parallel UL RTOA measurements on two carrier frequencies . 45g38.5.1 Definition and applicability 45g38.5.2 Minimum requirement 45g38.5.

33、3 Test Purpose 45g38.5.4 Method of testing 46g38.5.4.1 Initial conditions . 46g38.5.4.2 Procedure 46g38.5.5 Test requirement . 46g3Annex A (informative): Reference measurement channel 47g3A.1 Reference measurement channel 47g3Annex B (informative): Propagation conditions 52g3B.1 Static Propagation c

34、ondition 52g3B.2 Multi-path fading propagation conditions 52g3Annex C (informative): Characteristics of the interfering signals . 53g3C.1 Interfering signals in LMU RF tests 53g3C.2 Interfering signals in LMU performance tests . 53g3ETSI ETSI TS 136 112 V14.0.0 (2017-04)63GPP TS 36.112 version 14.0.

35、0 Release 14Annex D (informative): Environmental requirements for the LMU equipment 54g3D.1 General . 54g3D.2 Normal test environment 54g3D.3 Extreme test environment . 54g3D.3.1 Extreme temperature 54g3D.4 Vibration . 55g3D.5 Power supply 55g3D.6 Measurement of test environments . 55g3Annex E (info

36、rmative): General Rules for statistical testing 56g3E.1 Error Definition 56g3E.2 Test Method 56g3Annex F (informative): Test tolerances and derivation of test requirements . 57g3F.1 Test tolerances and derivation of test requirements . 57g3Annex G (informative): Measurement system setup . 59g3G.1 Re

37、ceiver RF Requirements Testing 59g3G.1.1 Receiver sensitivity level 59g3G.1.2 Dynamic range . 59g3G.1.3 In-channel selectivity . 60g3G.1.4 Adjacent channel selectivity (ACS) and narrow-band blocking. 60g3G.1.5 Blocking . 61g3G.1.6 Receiver spurious emissions. 61g3G.1.7 Receiver intermodulation . 62g

38、3G.2 UL RTOA measurement time requirements Testing 62g3G.2.1 UL RTOA measurement time, FDD without DRX 62g3G.2.2 UL RTOA measurement time, TDD without DRX 63g3G.3 UL RTOA measurement accuracy requirements Testing 63g3G.3.1 UL RTOA measurement accuracy for a UE not configured with CA 63g3G.3.2 UL RTO

39、A measurement accuracy for a UE configured with CA 63g3G.3.3 UL RTOA measurement accuracy when LMU is performing multiple UL RTOA measurements in parallel 64g3Annex H (informative): Change history . 65g3History 66g3ETSI ETSI TS 136 112 V14.0.0 (2017-04)73GPP TS 36.112 version 14.0.0 Release 14Forewo

40、rd This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be r

41、e-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second

42、digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 112 V14.0.0 (2017-04)83GPP TS 36.112 version 14.0.0 Release 141 Scope The p

43、resent document establishes the conformance requirements for E-UTRAN Location Measurement Units (LMU) operating in the FDD or TDD mode. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are eithe

44、r specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a

45、 non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.111: “Location Measurement Unit (LMU) performance specification“. 3 3GPP TS 36.211: “Physical channels an

46、d modulation“. 4 IEC 60721-3-3 (2002): “Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weather protected locations“. 5 IEC 60721-3-4 (1995): “Classification of environmental conditions - Pa

47、rt 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weather protected locations“. 6 IEC 60068-2-1 (2007): “Environmental testing - Part 2: Tests. Tests A: Cold“. 7 IEC 60068-2-2 (2007): “Environmental testing - Part 2: Tests. Tests B: Dr

48、y heat“. 8 IEC 60068-2-6 (2007): “Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the

49、 present document takes precedence over the definition of the same term, if any, in TR 21.905 1. 3.2 Symbols For the purposes of the present document, the following symbols apply: BWChannel Channel bandwidth BWChannel_CA Aggregated Channel bandwidth s Received energy per RE (power normalized to the subcarrier spacing) during the useful part of the symbol, i.e. excluding the cyclic prefix, at the LMU antenna connector Fedge_high Upper edge of the Aggregated Channel Bandwidth Fedge_low Lower edge of the Aggregated Channel Bandwidth Io The total received p