ETSI TS 136 117-2016 Universal Mobile Telecommunications System (UMTS) LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Relay conformance testing (V13 0 1 3GPP TS 36 117 ver.pdf

1、 ETSI TS 1Universal Mobile TelEvolved Universal TRelay (3GPP TS 36.1TECHNICAL SPECIFICATION136 117 V13.0.1 (2016elecommunications System (LTE; l Terrestrial Radio Access (E-conformance testing .117 version 13.0.1 Release 1316-01) (UMTS); UTRA); 13) ETSI ETSI TS 136 117 V13.0.1 (2016-01)13GPP TS 36.1

2、17 version 13.0.1 Release 13Reference RTS/TSGR-0436117vd01 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (0

3、6) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without

4、the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the p

5、resent document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one

6、of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content

7、of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks

8、 of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 117 V13.0.1 (2016-01)23GPP

9、TS 36.117 version 13.0.1 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI

10、 SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no i

11、nvestigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Sp

12、ecification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI delive

13、rables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interp

14、reted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 117 V13.0.1 (2016-01)33GPP TS 36.117 version 13.0.1 Release 13Contents Intelle

15、ctual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g33.3 Abbreviations . 9g34. General test conditions and declarations 10g34.1 Measurement uncertainties and Test Req

16、uirements . 11g34.1.1 General 11g34.1.2 Acceptable uncertainty of Test System . 11g34.1.2.1 Measurement of relay access transmitter 11g34.1.2.2 Measurement of relay access receiver . 11g34.1.2.3 Measurement of performance requirement . 11g34.2 Relay classes 11g34.3 Regional requirements 11g34.4 Sele

17、ction of configurations for testing 12g34.5 Manufacturers declarations of regional and optional requirements . 12g34.6 Specified frequency range and supported channel bandwidth 12g34.7 Format and interpretation of tests . 12g35 Operating bands and Channel arrangement 13g35.1 General . 13g35.2 Operat

18、ing bands 13g35.3 Channel bandwidth . 13g35.4 Channel arrangement 13g36. Transmitter characteristics . 13g36.1 General . 13g36.1.1 E-UTRA Test Models . 13g36.2 Output power 14g36.2.1 Definition and applicability 14g36.2.2 Minimum Requirement . 14g36.2.3 Test purpose 15g36.2.4 Method of test . 15g36.

19、2.5 Test Requirements 15g36.2.6 Configured transmitted Power for backhaul link 16g36.3 Output power dynamics 16g36.3.1 Access Link Test Requirements. . 16g36.3.1.1 RE Power control dynamic range 16g36.3.1.2 Total power dynamic range . 16g36.3.1.3 Transmitter OFF power . 16g36.3.1.4 Transmitter trans

20、ient period 16g36.3.2 Backhaul Link Test Requirements 16g36.3.2.1 Minimum Output Power . 16g36.3.2.1.1 Test purpose 16g36.3.2.1.2 Test applicability . 16g36.3.2.1.3 Minimum conformance requirements 17g36.3.2.1.4 Test description . 17g36.3.2.1.5 Test Requirement. 17g3ETSI ETSI TS 136 117 V13.0.1 (201

21、6-01)43GPP TS 36.117 version 13.0.1 Release 136.3.2.2 Power Control Absolute power tolerance . 17g36.3.2.3 Power Control Relative power tolerance . 17g36.3.2.4 Aggregate power control tolerance . 18g36.3.2.5 Power Control for UL-MIMO . 18g36.3.2.6 Transmit ON/OFF Time Mask 18g36.3.2.7 Transmit OFF P

22、ower . 18g36.3.2.7.1 Minimum requirement . 18g36.3.2.7.2 Test requirement 18g36.4 Transmitted signal quality 19g36.4.1 Frequency error . 19g36.4.1.1 Definition and applicability . 19g36.4.1.2 Minimum Requirement . 19g36.4.1.3 Test purpose 19g36.4.1.4 Method of test . 19g36.4.1.5 Test requirement . 1

23、9g36.4.2 EVM . 19g36.4.3 Time alignment error 19g36.4.4 DL RS power 20g36.5 Unwanted emissions . 20g36.5.1 Transmitter spurious emissions . 20g36.5.2 Adjacent Channel Leakage power Ratio (ACLR) 20g36.5.3 Operating Bands Unwanted Emissions . 20g36.5.3.1 Definition and applicability . 20g36.5.3.2 Mini

24、mum Requirement . 21g36.5.3.3 Test purpose 21g36.5.3.4 Method of test . 21g36.5.3.5 Test Requirement 21g36.6 Transmitter intermodulation . 24g37. Receiver characteristics 24g37.1 General . 24g37.2 Reference sensitivity level 24g37.2.1 Backhaul link reference sensitivity 24g37.2.1.1 Test requirement

25、. 24g37.2.2 Access link reference sensitivity . 25g37.3 Dynamic range . 25g37.3.1 Backhaul link Maximum Input Level . 25g37.3.2 Access link Receiver Dynamic Range 25g37.4 In-channel selectivity . 25g37.5 Adjacent Channel Selectivity (ACS) 25g37.5.1 Backhaul Adjacent Channel Selectivity (ACS) 25g37.5

26、.2 Access Link Adjacent Channel Selectivity (ACS) 26g37.6 Blocking characteristics . 26g37.6.1 Backhaul Blocking Characteristics . 26g37.6.2 Access Link Blocking Characteristics 26g37.6.3 Blocking requirements for co-location . 26g37.7 Receiver spurious emissions. 26g37.7.1 Backhaul Link Receiver Sp

27、urious Emissions . 26g37.7.2 Access Link Receiver Spurious Emissions . 26g37.8 Receiver intermodulation . 26g37.8.1 Backhaul Link Receiver Intermodulation . 26g37.8.2 Access Link Receiver Intermodulation . 27g38. Access Performance requirement . 27g38.1 General . 27g38.2 Performance requirements for

28、 PUSCH 27g38.2.1 Requirements in multipath fading propagation conditions . 27g38.2.2 Requirements for UL timing adjustment 27g38.2.3 Requirements for HARQ-ACK multiplexed on PUSCH 28g38.3 Performance requirements for PUCCH 28g38.3.1 ACK missed detection requirements for single user PUCCH format 1a 2

29、8g38.3.2 CQI missed detection requirements for PUCCH format2 . 28g3ETSI ETSI TS 136 117 V13.0.1 (2016-01)53GPP TS 36.117 version 13.0.1 Release 138.3.3 ACK missed detection requirements for multi user PUCCH format 1a . 28g38.4 Performance requirements for PRACH 28g38.4.1 PRACH false alarm probabilit

30、y and missed detection 28g39. Backhaul Performance requirement . 29g39.1 General . 29g39.2 Demodulation of PDSCH (Cell-Specific Reference Symbols) 29g39.3 Demodulation of PDSCH (User-Specific Reference Symbols) 29g39.4 Demodulation of PDCCH/PCFICH . 29g39.5 Demodulation of PHICH 29g39.6 Demodulation

31、 of PBCH . 29g39.7 Sustained downlink data rate provided by lower layers . 29g39.8 Demodulation of R-PDCCH. 30g39.8.1 FDD 30g39.8.1.1 FDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port 7 with 1x2 antenna configuration 30g39.8.1.1.1 Test purpose 30g39.8.1.1.2 T

32、est applicability . 30g39.8.1.1.3 Minimum conformance requirements 30g39.8.1.1.4 Test description . 31g39.8.1.1.4.1 Initial conditions 31g39.8.1.1.4.2 Test procedure 32g39.8.1.1.4.3 Message contents . 32g39.8.1.1.5 Test requirement 34g39.8.1.2 FDD R-PDCCH performance based on UE-specific reference s

33、ignals transmitted on antenna port 7 with 4x2 antenna configuration 35g39.8.1.2.1 Test purpose 35g39.8.1.2.2 Test applicability . 35g39.8.1.2.3 Minimum conformance requirements 35g39.8.1.2.4 Test description . 37g39.8.1.2.4.1 Initial conditions 37g39.8.1.2.4.2 Test procedure 37g39.8.1.2.4.3 Message

34、contents . 38g39.8.1.2.5 Test requirement 40g39.8.2 TDD 40g39.8.2.1 TDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port 7 with 1x2 antenna configuration 40g39.8.2.1.1 Test purpose 40g39.8.2.1.2 Test applicability . 40g39.8.2.1.3 Minimum conformance requirements

35、 40g39.8.2.1.4 Test description . 41g39.8.2.1.4.1 Initial conditions 41g39.8.2.1.4.2 Test procedure 42g39.8.2.1.4.3 Message contents . 42g39.8.2.1.5 Test requirement 44g39.8.2.2 TDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port 7 with 4x2 antenna configuratio

36、n 45g39.8.2.2.1 Test purpose 45g39.8.2.2.2 Test applicability . 45g39.8.2.2.3 Minimum conformance requirements 45g39.8.2.2.4 Test description . 46g39.8.2.2.4.1 Initial conditions 46g39.8.2.2.4.2 Test procedure 47g39.8.2.2.4.3 Message contents . 47g39.8.2.2.5 Test requirement 50g3Annex A (normative):

37、 Propagation models for relay demodulation requirements . 51g3A.1 Propagation models for backhaul link 51g3A.1.1 Delay Profiles . 51g3A.1.1.1 LOS between eNB and relay. 51g3A.1.1.2 NLOS between eNB and relay 51g3A.1.2 Doppler Frequency . 52g3ETSI ETSI TS 136 117 V13.0.1 (2016-01)63GPP TS 36.117 vers

38、ion 13.0.1 Release 13A.1.3 MIMO Correlation Matrices. 52g3A.2 multipath propagation fading conditions for access link 53g3Annex B (normative): Reference Measurement Channel 55g3B.1 Reference measurement channels for R-PDCCH performance requirements 55g3B.1.1 R-PDCCH format without cross-interleaving

39、 55g3B.1.1.1 FDD 55g3B.1.1.2 TDD 55g3B.2 OCNG patterns for R-PDCCH performance requirements 55g3B.2.1 FDD 56g3B.2.1.1 OCNG FDD pattern 1for R-PDCCH 56g3B.2.2 TDD 56g3B.2.2.1 OCNG TDD pattern 1for R-PDCCH 56g3Annex C (normative): Physical Channel Set-up for conformance tests 58g3C.1 Set-up for R-PDCC

40、H 58g3C.2 Set-up for PDSCH 58g3Annex D (informative): Change history . 60g3History 61g3ETSI ETSI TS 136 117 V13.0.1 (2016-01)73GPP TS 36.117 version 13.0.1 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present d

41、ocument are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z whe

42、re: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is

43、incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 117 V13.0.1 (2016-01)83GPP TS 36.117 version 13.0.1 Release 131 Scope The present document specifies the Radio Frequency (RF) test methods and conformance requirements for E-UTRA Relay. These have been d

44、erived from, and are consistent with the E-UTRA Relay specifications defined in 2. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, editio

45、n number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the late

46、st version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.116: “Evolved Universal Terrestrial Radio Access (E-UTRA); Relay radio transmission and reception“. 3 3GPP TS 36.141: “Evolved Universal Terrestrial Radio Acc

47、ess (E-UTRA); Base Station (BS) Conformance Testing (Release 11)“. 4 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) Radio Transmission and Reception (Release 11)“. 5 3GPP TR 36.826: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) Relay

48、 Radio Transmission and Reception“. 6 3GPP TS 36.101: “User Equipment (UE) radio transmission and reception“. 7 3GPP TS 36.521-1 “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); User Equipment (UE) conformance specification; Part 1: Protocol conformance specificati

49、on“. 8 3GPP TS 36.508 “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE) conformance testing“. 9 3GPP TS 36.211: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and modulation“. 10 3GPP TS 36.213: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer procedures“. 11 3GPP TS 36.331: “Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specification“. 3 Definitions, symbols and abbreviations 3.1