ETSI TS 136 124-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillary equipment (V13 1 0 .pdf

1、 ETSI TS 1Evolved Universal TElectromagrequirements for mobi(3GPP TS 36.1TECHNICAL SPECIFICATION136 124 V13.1.0 (2016LTE; l Terrestrial Radio Access (E-agnetic compatibility (EMC) bile terminals and ancillary eq.124 version 13.1.0 Release 1316-04) UTRA); equipment 13) ETSI ETSI TS 136 124 V13.1.0 (2

2、016-04)13GPP TS 36.124 version 13.1.0 Release 13Reference RTS/TSGR-0436124vd10 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfectu

3、re de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be mo

4、dified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

5、 Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your

6、comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETS

7、I. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo

8、are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 124 V13.1.0

9、(2016-04)23GPP TS 36.124 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can b

10、e found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI I

11、PR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword Th

12、is Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the correspond

13、ing ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ a

14、re to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 124 V13.1.0 (2016-04)33GPP TS 36.124 version 13.1.0 Release 13C

15、ontents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g33.3 Abbreviations . 9g34 Test conditions . 10g34.1 General . 10g34.2 Arrangements for establishing a commun

16、ication link 11g34.3 Narrow band responses on receivers 11g34.4 Receiver exclusion band . 12g35 Performance assessment . 13g35.1 General . 13g35.2 Equipment which can provide a continuous communication link 14g35.3 Equipment which can only provide a discontinuous communication link (packet data/tran

17、smission). 14g35.4 Equipment which does not provide a communication link . 14g35.5 Conformance of ancillary equipment . 14g35.6 Equipment classification 14g36 Performance criteria . 14g36.1 Performance criteria for continuous phenomena 15g36.2 Performance criteria for Transient phenomena 15g37 Appli

18、cability overview tables . 16g37.1 Emission . 16g37.2 Immunity 17g38 Methods of measurement and limits for EMC emissions 17g38.1 Test configurations . 17g38.2 Radiated Emission 18g38.2.1 Definition 18g38.2.2 Test method 18g38.2.3 Limits 18g38.2.4 Interpretation of the measurement results . 19g38.3 C

19、onducted emission DC power input/output port 19g38.3.1 Definition 20g38.3.2 Test method 20g38.3.3 Limits 20g38.4 Conducted emissions, AC mains power input/output port . 20g38.4.1 Definition 20g38.4.2 Test method 20g38.4.3 Limits 21g38.5 Harmonic current emissions (AC mains input port) . 21g38.6 Volt

20、age fluctuations and flicker (AC mains input port) . 21g39 Test methods and levels for immunity tests . 21g39.1 Test configurations . 21g39.2 RF electromagnetic field (80 MHz - 1000 MHz and 1400 MHZ to 2700 MHz) 22g39.2.1 Definition 22g39.2.2 Test method and level . 22g3ETSI ETSI TS 136 124 V13.1.0

21、(2016-04)43GPP TS 36.124 version 13.1.0 Release 139.2.3 Performance criteria 22g39.3 Electrostatic discharge 22g39.3.1 Definition 22g39.3.2 Test method and level . 23g39.3.3 Performance criteria 23g39.4 Fast transients common mode 23g39.4.1 Definition 23g39.4.2 Test method and level . 23g39.4.3 Perf

22、ormance criteria 23g39.5 RF common mode (0.15 MHz to 80 MHz) 23g39.5.1 Definition 24g39.5.2 Test method and level . 24g39.5.3 Performance criteria 24g39.6 Transients and surges, vehicular environment 24g39.6.1 Definition 24g39.6.2 Test method and level . 24g39.6.2.1 12 V DC powered equipment 25g39.6

23、.2.2 24 V DC powered equipment 25g39.6.3 Performance criteria 25g39.7 Voltage dips and interruptions 26g39.7.1 Definition 26g39.7.2 Test method and level . 26g39.7.3 Performance criteria 26g39.8 Surges, common and differential mode 26g39.8.1 Definition 26g39.8.2 Test method and level . 26g39.8.3 Per

24、formance criteria 26g3Annex A (normative): Performance assessment voice call. Audio break through . 27g3A.1 Calibration of audio levels . 27g3A.2 Measurement of audio levels 28g3Annex B (normative): Performance assessment of data transfer call. Throughput Percentages . 29g3B.1 Calibration of data tr

25、ansfer . 29g3B.2 Derivation of Throughput Percentages . 29g3B.3 EUT without data application ancillary 29g3B.4 EUT with data application ancillary . 29g3Annex C (informative): Change History 31g3History 32g3ETSI ETSI TS 136 124 V13.1.0 (2016-04)53GPP TS 36.124 version 13.1.0 Release 13Foreword This

26、Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-releas

27、ed by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is

28、 incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 124 V13.1.0 (2016-04)63GPP TS 36.124 version 13.1.0 Release 131 Scope The present d

29、ocument establishes the essential EMC requirements for “3rdgeneration“ digital cellular mobile terminal equipment and ancillary accessories in combination with a 3GPP E-UTRA user equipment (UE). The equipment conforming to the requirements laid out in the present document and used in its intended el

30、ectromagnetic environment in accordance with the manufacturers instructions - shall not generate electromagnetic disturbances at a level which may interfere with the intended operation of other equipment; - has an adequate level of intrinsic immunity to electromagnetic disturbances to operate as int

31、ended; The present document specifies the applicable EMC tests, the methods of measurement, the frequency range, the limits and the minimum performance criteria for all types of E-UTRA UEs and their accessories. E-UTRA base station equipment operating within network infrastructure is outside the sco

32、pe of the present document. However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed location while connected to the AC mains. E-UTRA base stations in the radio access network are covered by the technical specification TS36.113 2. Requirements

33、 for the radiated emission from the enclosure port of integral antenna equipment and ancillaries have been included. Technical specifications for conducted emissions from the antenna connector are found in the 3GPP specifications for the radio interface, e.g. TS36.521 3, for the effective use of the

34、 radio spectrum. The immunity requirements have been selected to ensure an adequate level of compatibility for apparatus in residential, commercial, light industrial and vehicular environments. The levels however, do not cover extreme cases, which may occur in any location but with low probability o

35、f occurrence. The environment classification used in the present document refers to the environment classification used in the Generic Standards IEC 61000-6-1 4, IEC 61000-6-3 5, except the vehicular environment class which refers to ISO 7637 Part 1 6 and Part 2 7. Compliance of radio equipment to t

36、he requirements of the present document does not signify compliance to any requirement related to the use of the equipment (i.e. licensing requirements). Compliance to the requirements of the present document does not signify compliance to any safety requirement. However, any temporary or permanent

37、unsafe condition caused by EMC is considered as non-compliance. 2 References The following documents contain provisions, which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version nu

38、mber, etc.) or non-specific; for a specific reference, subsequent revisions do not apply; for a non-specific reference, subsequent revisions do apply. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that do

39、cument in the same Release as the present document. 1 3GPP TR 25.990: “Vocabulary for UTRAN“. 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.113: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base station and repeater electromagnetic compatibility (EMC)“. 3 3GPP TS 36.521

40、: “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); User Equipment (UE) conformance specification Radio transmission and reception“. ETSI ETSI TS 136 124 V13.1.0 (2016-04)73GPP TS 36.124 version 13.1.0 Release 134 IEC 61000-6-1 (19

41、97): “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity standard for residential, commercial and light-industrial environments“. 5 IEC 61000-6-3 (1996): “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential

42、, commercial and light-industrial environments. 6 ISO 7637-1 (1990): “Road vehicles - Electrical disturbance by conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only“. 7 ISO 7637-2 (19

43、90): “Road vehicles - Electrical disturbance by conduction and coupling - Part 2: Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only“. 8 IEC 60050(161): “International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility

44、“. 9 ITU-R Recommendation SM.329: “Unwanted emissions in the spurious domain“. 10 IEC CISPR publication 22: “Information technology equipment; Radio disturbance characteristics - Limits and methods of measurement“. 11 3GPP TS 36.101: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipme

45、nt (UE) radio transmission and reception (FDD)“. 12 3GPP TS 36.508: “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Common test environments for User Equipment (UE) conformance testing“. 13 3GPP TS 36.523: “ Evolved Universal Ter

46、restrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); User Equipment (UE) conformance specification“. 14 IEC CISPR publication 16-1: “Specification for radio disturbance and immunity measuring apparatus and methods“. 15 IEC 61000-3-2; (2000): “Electromagnet

47、ic compatibility; Part 3 - Limits; section 2 - Limits for harmonic current emissions (equipment input current 16 A per phase)“; Am.1 (1997-09)“. 16 IEC 61000-3-3; (19952): “Electromagnetic compatibility; Part 3 - Limits; section 2 - Limitation of voltage fluctuations and flicker in low-voltage suppl

48、y systems for equipment with rated current 16 A“ 17 IEC 61000-4-3: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 3: Radiated, radio-frequency electromagnetic field immunity test“. 18 IEC 61000-4-2: “Electromagnetic compatibility (EMC) - Part 4: Testing a

49、nd measurement techniques - section 2: Electrostatic discharge immunity test - Basic EMC publication“. 19 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 4: Electrical fast transient/burst immunity test - Basic EMC publication“. 20 IEC 61000-4-6: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - section 6: immunity to conducted disturbances induced by radio frequency fields“. 21 IEC 61000-4-11: “Electromagnetic compatibi