ETSI TS 136 143-2017 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) FDD repeater conformance testing (V14 0 0 3GPP TS 36 143 version 14 0 0 Release 14)《长期演进技术(LTE) 演进型通用陆地.pdf

1、 ETSI TS 136 143 V14.0.0 (2017-04) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); FDD repeater conformance testing (3GPP TS 36.143 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 136 143 V14.0.0 (2017-04)13GPP TS 36.143 version 14.0.0 Release 14Reference RTS/TSGR-0436143ve

2、00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be dow

3、nloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any exist

4、ing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subj

5、ect to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/P

6、eople/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without th

7、e written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.

8、 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 143 V14.0.0 (2017-04)2

9、3GPP TS 36.143 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in

10、 ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy,

11、 no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technic

12、al Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI d

13、eliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be i

14、nterpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 143 V14.0.0 (2017-04)33GPP TS 36.143 version 14.0.0 Release 14Contents In

15、tellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 9g33.3 Abbreviations . 10g34 General test conditions and declarations 10g34.1 Measurement uncertainties and tes

16、t requirements 11g34.1.1 General 11g34.1.2 Acceptable uncertainty of test system . 11g34.1.2.1 Measurement of Repeater . 12g34.1.2.2 Interpretation of measurement results . 13g34.2 Regional requirements 14g34.3 Selection of configurations for testing 14g34.4 Repeater configurations 15g34.4.1 Power s

17、upply options 15g34.4.2 Combining of repeaters . 15g34.5 Manufacturers declarations of regional and optional requirements 15g34.5.1 Operating band and frequency range 15g34.5.2 Channel bandwidth . 15g34.5.3 Repeater output power 15g34.5.4 Spurious emissions Category 15g34.5.5 Additional operating ba

18、nd unwanted emissions . 16g34.5.6 Co-existence with other systems . 16g34.5.7 Co-location with base stations 16g34.6 Specified frequency range 17g34.7 Format and interpretation of tests . 17g35 Operating bands and channel arrangement . 17g35.1 General . 17g35.2 Void 18g35.3 Void 18g35.4 Void 18g35.5

19、 Operating bands 18g35.6 Channel bandwidth . 18g35.7 Channel arrangement 19g35.7.1 Channel spacing 19g35.7.2 Channel raster . 19g35.7.3 Carrier frequency and EARFCN . 20g36 Output power 21g36.1 Definition and applicability 21g36.2 Minimum requirement 21g36.3 Test purpose . 21g36.4 Method of test . 2

20、1g36.4.1 Initial conditions . 21g36.4.2 Procedure 21g36.5 Test requirements . 22g37 Frequency stability . 22g37.1 Definition and applicability 22g3ETSI ETSI TS 136 143 V14.0.0 (2017-04)43GPP TS 36.143 version 14.0.0 Release 147.2 Minimum requirements 22g37.3 Test purpose . 22g37.4 Method of test . 2

21、3g37.5 Test requirement . 23g38 Out of band gain . 23g38.1 Definition and applicability 23g38.2 Minimum requirements 23g38.3 Test purpose . 23g38.4 Method of test . 23g38.4.1 Initial conditions . 23g38.4.2 Procedure 23g38.5 Test requirements . 24g39 Unwanted emissions . 24g39.1 Operating band unwant

22、ed emissions 24g39.1.1 Definition and applicability 24g39.1.2 Minimum requirements . 25g39.1.3 Test purpose 25g39.1.4 Method of test . 25g39.1.4.1 Initial conditions . 25g39.1.4.2 Procedures . 25g39.1.5 Test requirements 26g39.1.5.1 Operating band unwanted emission (Category A) 26g39.1.5.2 Operating

23、 band unwanted emissions (Category B) . 28g39.1.5.2.1 Category B test requirements (Option 1) . 28g39.1.5.2.2 Category B test requirements (Option 2) . 31g39.1.5.3 Additional requirements 32g39.1.5.4 Protection of the BS receiver in the operating band 35g39.2 Spurious emissions . 36g39.2.1 Definitio

24、n and applicability 36g39.2.2 Minimum requirements . 36g39.2.3 Test purpose 36g39.2.4 Method of test . 36g39.2.4.1 Initial conditions . 36g39.2.4.2 Procedures . 36g39.2.5 Test requirements 37g39.2.5.1 Spurious emission (Category A) . 37g39.2.5.2 Spurious emission (Category B) . 37g39.2.5.3 Co-existe

25、nce with other systems in the same geographical area . 38g39.2.5.4 Co-location with base stations. 45g310 Error Vector Magnitude (EVM) . 51g310.1 Downlink Error Vector Magnitude. 51g310.1.1 Definition and applicability 51g310.1.2 Minimum requirements . 51g310.1.3 Test purpose 51g310.1.4 Method of te

26、st . 51g310.1.4.1 Initial conditions . 51g310.1.4.2 Procedure 52g310.1.5 Test requirement . 52g310.2 Uplink Error Vector Magnitude . 52g310.2.1 Definition and applicability 52g310.2.2 Minimum requirements . 52g310.2.3 Test purpose 52g310.2.4 Method of test . 52g310.2.4.1 Initial conditions . 52g310.

27、2.4.2 Procedure 52g310.2.5 Test requirement . 53g311 Input intermodulation . 53g311.1 Definition and applicability 53g311.2 Minimum requirements 53g3ETSI ETSI TS 136 143 V14.0.0 (2017-04)53GPP TS 36.143 version 14.0.0 Release 1411.3 Test purpose . 53g311.4 Method of test . 53g311.4.1 Initial conditi

28、ons . 53g311.4.2 Procedure 54g311.5 Test requirements . 54g311.5.1 General requirement . 54g311.5.2 Co-location with BS in other systems . 54g311.5.3 Co-existence with other systems . 60g312 Output intermodulation 65g312.1 Definition and applicability 65g312.2 Minimum requirement 66g312.3 Test purpo

29、se . 66g312.4 Method of test . 66g312.4.1 Initial conditions . 66g312.4.2 Procedure 66g312.5 Test Requirements 67g313 Adjacent Channel Rejection Ratio (ACRR) . 67g313.1 Definitions and applicability 67g313.1.1 Minimum requirements . 67g313.2 Co-existence with UTRA . 67g313.2.1 Minimum requirements .

30、 67g313.2.2 Test purpose 67g313.2.3 Method of test . 67g313.2.3.1 Initial conditions . 67g313.2.3.2 Procedure 68g313.2.3.3 Test Requirements . 68g3Annex A (normative): Environmental requirements for the Repeater . 69g3A.1 General . 69g3A.2 Normal test environment 69g3A.3 Extreme test environment . 6

31、9g3A.3.1 Extreme temperature . 69g3A.4 Vibration . 70g3A.5 Power supply 70g3A.6 Measurement of test environments . 70g3Annex B (informative): Test tolerances and derivation of test requirements . 71g3Annex C (informative): Measurement system set-up 75g3C.1 Maximum output power . 75g3C.2 Frequency st

32、ability . 75g3C.3 Out of band gain . 76g3C.4 Unwanted emission: Operating band unwanted emission 76g3C.5 Unwanted emission: Spurious emission . 77g3C.6 Modulation Accuracy: Error Vector Magnitude 77g3C.7 Input intermodulation . 78g3C.8 Output Intermodulation 78g3C.9 Adjacent Channel Rejection Ratio

33、. 79g3Annex D (normative): Repeater stimulus signals 80g3D.1 Repeater stimulus signal 1 80g3ETSI ETSI TS 136 143 V14.0.0 (2017-04)63GPP TS 36.143 version 14.0.0 Release 14D.2 Repeater stimulus signal 2 80g3D.3 Repeater stimulus signal 3 80g3D.4 Repeater stimulus signal 4 81g3D.5 Repeater stimulus si

34、gnal spectral purity requirements . 81g3Annex E (informative): Change history . 82g3History 85g3ETSI ETSI TS 136 143 V14.0.0 (2017-04)73GPP TS 36.143 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the

35、present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version

36、x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third

37、digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 143 V14.0.0 (2017-04)83GPP TS 36.143 version 14.0.0 Release 141 Scope The present document specifies the Radio Frequency (RF) test methods and conformance requirements for E-UTRA FDD Repeater. T

38、hese have been derived from, and are consistent with the E-UTRA FDD repeater specifications defined in 2. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date o

39、f publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly r

40、efers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications”. 2 3GPP TS 36.106: “Evolved Universal Terrestrial Radio Access (E-UTRA); FDD repeater radio transmission and reception”. 3 ITU-R Recommendation M.1545: “Me

41、asurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000”. 4 ITU-R recommendation SM.329: “Unwanted emissions in the spurious domain”. 5 3GPP TR 25.942: “Radio Frequency (RF) system scenarios”. 6 IEC 60721-3-3 (2002): “Classific

42、ation of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 3: Stationary use at weather protected locations”. 7 IEC 60721-3-4 (1995): “Classification of environmental conditions Part 3: Classification of groups of environmental paramet

43、ers and their severities Section 4: Stationary use at non-weather protected locations”. 8 IEC 60068-2-1 (2007): “Environmental testing Part 2: Tests. Tests A: Cold”. 9 IEC 60068-2-2 (2007): “Environmental testing Part 2: Tests. Tests B: Dry heat”. 10 IEC 60068-2-6 (2007): “Environmental testing Part

44、 2: Tests Test Fc: Vibration (sinusoidal)”. 11 3GPP TS 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing”. 12 3GPP TS 36.521-1: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission an

45、d reception; Part 1: Conformance testing”. 13 3GPP TS.36.104: “E-UTRA Base Station (BS) radio transmission and reception“. 14 CEPT ECC Decision (13)03, “The harmonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL) “. ETSI ETSI TS 13

46、6 143 V14.0.0 (2017-04)93GPP TS 36.143 version 14.0.0 Release 143 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the

47、definition of the same term, if any, in TR 21.905 1. Carrier: The modulated waveform conveying the E-UTRA or UTRA physical channels Channel bandwidth: The RF bandwidth supporting a single E-UTRA RF carrier with the transmission bandwidth configured in the uplink or downlink of a cell. The channel ba

48、ndwidth is measured in MHz and is used as a reference for transmitter and receiver RF requirements. Channel edge: The lowest and highest frequency of the E-UTRA carrier, separated by the channel bandwidth. Donor coupling loss: is the coupling loss between the repeater and the donor base station. Dow

49、nlink: Signal path where base station transmits and mobile receives. Downlink operating band: The part of the operating band designated for downlink. Maximum output power, Pmax: This is the mean power level per carrier measured at the antenna connector of the Repeater in specified reference condition. Operating band: A frequency range in which E-UTRA operates (paired or unpaired), that is defined with a specific set of technical requirements. NOTE1: The operating band(s) for an E-UTRA Repeater is declared by the manufac