ETSI TS 136 214-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Physical layer Measurements (V13 3 0 3GPP TS 36 214 version 13 3 0 Release 13)《长期演进技术(LTE) 演进型通用陆地无线接入(.pdf

1、 ETSI TS 136 214 V13.1.0 (2016-04) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer; Measurements (3GPP TS 36.214 version 13.1.0 Release 13) TECHNICAL SPECIFICATION ETSI ETSI TS 136 214 V13.1.0 (2016-04)13GPP TS 36.214 version 13.1.0 Release 13Reference RTS/TSGR-0136214vd10 K

2、eywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloa

3、ded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing

4、or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject

5、to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/Peopl

6、e/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the wr

7、itten authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GP

8、PTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 214 V13.1.0 (2016-04)23GPP TS 36.214 version 13.1.0 Release 13Intellectual Propert

9、y Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Esse

10、ntial, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried

11、out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generati

12、on Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and

13、 ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting R

14、ules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 214 V13.1.0 (2016-04)33GPP TS 36.214 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs term

15、inology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 6g33.3 Abbreviations . 6g34 Control of UE/E-UTRAN measurements . 6g35 Measurement capabilities for E-UTRA 7g35.1 UE measurement capabilities . 7g35.1.1 Reference Signal Re

16、ceived Power (RSRP) . 7g35.1.2 Void 8g35.1.3 Reference Signal Received Quality (RSRQ) 8g35.1.4 UTRA FDD CPICH RSCP . 8g35.1.5 UTRA FDD carrier RSSI 9g35.1.6 UTRA FDD CPICH Ec/No . 9g35.1.7 GSM carrier RSSI . 9g35.1.8 Void 9g35.1.9 UTRA TDD P-CCPCH RSCP 9g35.1.10 CDMA2000 1x RTT Pilot Strength 10g35.

17、1.11 CDMA2000 HRPD Pilot Strength 10g35.1.12 Reference signal time difference (RSTD) . 10g35.1.13 UE GNSS Timing of Cell Frames for UE positioning 10g35.1.14 UE GNSS code measurements 10g35.1.15 UE Rx Tx time difference 11g35.1.16 IEEE 802.11 WLAN RSSI . 11g35.1.17 MBSFN Reference Signal Received Po

18、wer (MBSFN RSRP) 11g35.1.18 MBSFN Reference Signal Received Quality (MBSFN RSRQ) . 12g35.1.19 Multicast Channel Block Error Rate (MCH BLER) . 12g35.1.20 CSI Reference Signal Received Power (CSI-RSRP) 12g35.1.21 Sidelink Reference Signal Received Power (S-RSRP) . 13g35.1.22 Sidelink Discovery Referen

19、ce Signal Received Power (SD-RSRP) . 13g35.1.23 Reference signal-signal to noise and interference ratio (RS-SINR) 14g35.1.24 Received Signal Strength Indicator (RSSI) 14g35.1.25 SFN and subframe timing difference (SSTD) . 15g35.2 E-UTRAN measurement abilities . 15g35.2.1 DL RS TX power 15g35.2.2 Rec

20、eived Interference Power 16g35.2.3 Thermal noise power 16g35.2.4 Timing advance (TADV) . 16g35.2.5 eNB Rx Tx time difference 16g35.2.6 E-UTRAN GNSS Timing of Cell Frames for UE positioning 17g35.2.7 Angle of Arrival (AoA) 17g35.2.8 UL Relative Time of Arrival (TUL-RTOA) . 17g3Annex A (informative):

21、Change history . 18g3History 19g3ETSI ETSI TS 136 214 V13.1.0 (2016-04)43GPP TS 36.214 version 13.1.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG

22、and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for informat

23、ion; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been inco

24、rporated in the document. ETSI ETSI TS 136 214 V13.1.0 (2016-04)53GPP TS 36.214 version 13.1.0 Release 131 Scope The present document contains the description and definition of the measurements done at the UE and network in order to support operation in idle mode and connected mode. 2 References The

25、 following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions d

26、o not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabul

27、ary for 3GPP Specifications”. 2 3GPP TS 36.201: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical Layer General Description “. 3 3GPP TS 36.211: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and modulation”. 4 3GPP TS 36.212: “Evolved Universal Terrestrial Radi

28、o Access (E-UTRA); Multiplexing and channel coding “. 5 3GPP TS 36.213: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer procedures “. 6 3GPP TS 36.321: “Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access Control (MAC) protocol specification“. 7 3GPP TS 36.331: “E

29、volved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specification “. 8 3GPP2 CS.0005-D v1.0 “Upper Layer (Layer 3) Signaling Standard for CDMA2000 Spread Spectrum Systems Release D”. 9 3GPP2 CS.0024-A v3.0 “cdma2000 High Rate Packet Data Air Interface Specifica

30、tion” 10 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception “. 11 3GPP TS 36.355: “Evolved Universal Terrestrial Radio Access (E-UTRA); LTE Positioning Protocol (LPP)” 12 3GPP TS 36.455: “Evolved Universal Terrestrial Radio Access

31、 (E-UTRA); LTE Positioning Protocol A (LPPa)” 13 3GPP TS 36.459: “Evolved Universal Terrestrial Radio Access (E-UTRA); SLm Application Protocol (SLmAP)” 14 3GPP TS 36.111: “Evolved Universal Terrestrial Radio Access (E-UTRA); Location Measurement Unit (LMU) performance specification; Network Based P

32、ositioning Systems in E-UTRAN” 15 IEEE 802.11, Part 11: “Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications, IEEE Std.“. 16 3GPP TS 36.304: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) procedures in idle mode “. ETSI ETSI TS 136 214 V13.1.0

33、(2016-04)63GPP TS 36.214 version 13.1.0 Release 133 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of

34、the same term, if any, in TR 21.905 1. 3.2 Symbols For the purposes of the present document, the following symbols apply: Ec/No Received energy per chip divided by the power density in the band 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the

35、 following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. 1x RTT CDMA2000 1x Radio Transmission Technology CPICH Common Pilot Channel E-SMLC Enhanced Serving Mobile Location Centre E-UTRA Evolved UTRA E-UT

36、RAN Evolved UTRAN FDD Frequency Division Duplex GNSS Global Navigation Satellite System GSM Global System for Mobile communication HRPD CDMA2000 High Rate Packet Data LMU Location Measurement Unit P-CCPCH Primary Common Control Physical Channel RSCP Received Signal Code Power RSRP Reference Signal R

37、eceived Power RSRQ Reference Signal Received Quality RSSI Received Signal Strength Indicator RSTD Reference Signal Time Difference SRS Sounding Reference Signal TDD Time Division Duplex UTRA Universal Terrestrial Radio Access UTRAN Universal Terrestrial Radio Access Network 4 Control of UE/E-UTRAN m

38、easurements In this chapter the general measurement control concept of the higher layers is briefly described to provide an understanding on how L1 measurements are initiated and controlled by higher layers. With the measurement specifications L1 provides measurement capabilities for the UE and E-UT

39、RAN. These measurements can be classified in different reported measurement types: intra-frequency, inter-frequency, inter-system, traffic volume, quality and UE internal measurements (see the RRC Protocol 7). In the L1 measurement definitions, see chapter 5, the measurements are categorised as meas

40、urements in the UE (the messages for these will be described in the MAC Protocol 6 or RRC Protocol 7 or LPP Protocol 11) or measurements in the E-UTRAN (the messages for these will be described in the Frame Protocol or LPPa Protocol 12). To initiate a specific measurement, the E-UTRAN transmits a RR

41、C connection reconfiguration message to the UE including a measurement ID and type, a command (setup, modify, release), the measurement objects, the measurement ETSI ETSI TS 136 214 V13.1.0 (2016-04)73GPP TS 36.214 version 13.1.0 Release 13quantity, the reporting quantities and the reporting criteri

42、a (periodical/event-triggered), see 7 or E-SMLC transmits an LPP Request Location Information message to UE, see 11. When the reporting criteria are fulfilled the UE shall answer with a measurement report message to the E-UTRAN including the measurement ID and the results or an LPP Provide Location

43、Information message to the E-SMLC, see 11. For idle mode, the measurement information elements are broadcast in the System Information. 5 Measurement capabilities for E-UTRA In this chapter the physical layer measurements reported to higher layers are defined. 5.1 UE measurement capabilities The str

44、ucture of the table defining a UE measurement quantity is shown below. Column field Comment Definition Contains the definition of the measurement. Applicable for States in which state(s) it shall be possible to perform this measurement. The following terms are used in the tables: RRC_IDLE; RRC_CONNE

45、CTED; Intra-frequency appended to the RRC state: Shall be possible to perform in the corresponding RRC state on an intra-frequency cell; Inter-frequency appended to the RRC state: Shall be possible to perform in the corresponding RRC state on an inter-frequency cell Inter-RAT appended to the RRC sta

46、te: Shall be possible to perform in the corresponding RRC state on an inter-RAT cell. 5.1.1 Reference Signal Received Power (RSRP) Definition Reference signal received power (RSRP), is defined as the linear average over the power contributions (in W) of the resource elements that carry cell-specific

47、 reference signals within the considered measurement frequency bandwidth. For RSRP determination the cell-specific reference signals R0 according to TS 36.211 3 shall be used. If the UE can reliably detect that R1 is available it may use R1 in addition to R0 to determine RSRP. If higher layers indic

48、ate measurements based on discovery signals, the UE shall measure RSRP in the subframes in the configured discovery signal occasions. If the UE can reliably detect that cell-specific reference signals are present in other subframes, the UE may use those subframes in addition to determine RSRP. The r

49、eference point for the RSRP shall be the antenna connector of the UE. If receiver diversity is in use by the UE, the reported value shall not be lower than the corresponding RSRP of any of the individual diversity branches. Applicable for RRC_IDLE intra-frequency, RRC_IDLE inter-frequency, RRC_CONNECTED intra-frequency, RRC_CONNECTED inter-frequency NOTE 1: The number of resource elements within the considered measurement frequency bandwidth and within the measurement period that are used by the UE to d