ETSI TS 136 214-2018 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Physical layer Measurements (V14 4 0 3GPP TS 36 214 version 14 4 0 Release 14).pdf

1、 ETSI TS 136 214 V14.4.0 (2018-01) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer; Measurements (3GPP TS 36.214 version 14.4.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 136 214 V14.4.0 (2018-01)13GPP TS 36.214 version 14.4.0 Release 14Reference RTS/TSGR-0136214ve40 K

2、eywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloa

3、ded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing

4、or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject

5、to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/Peopl

6、e/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the wr

7、itten authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registere

8、d for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 136 214 V14.4.0 (2018-01)23GPP TS 36.214 version 14.4.0 Release 14Intellect

9、ual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual

10、 Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IP

11、R searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademar

12、ks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document

13、does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports us

14、ing their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In

15、 the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI del

16、iverables except when used in direct citation. ETSI ETSI TS 136 214 V14.4.0 (2018-01)33GPP TS 36.214 version 14.4.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 7g33.1 D

17、efinitions 7g33.2 Symbols 7g33.3 Abbreviations . 7g34 Control of UE/E-UTRAN measurements . 7g35 Measurement capabilities for E-UTRA 8g35.1 UE measurement capabilities . 8g35.1.1 Reference Signal Received Power (RSRP) . 9g35.1.2 Void 9g35.1.3 Reference Signal Received Quality (RSRQ) 10g35.1.4 UTRA FD

18、D CPICH RSCP . 10g35.1.5 UTRA FDD carrier RSSI 10g35.1.6 UTRA FDD CPICH Ec/No . 11g35.1.7 GSM carrier RSSI . 11g35.1.8 Void 11g35.1.9 UTRA TDD P-CCPCH RSCP 11g35.1.10 CDMA2000 1x RTT Pilot Strength 11g35.1.11 CDMA2000 HRPD Pilot Strength 11g35.1.12 Reference signal time difference (RSTD) . 12g35.1.1

19、3 UE GNSS Timing of Cell Frames for UE positioning 12g35.1.14 UE GNSS code measurements 12g35.1.15 UE Rx Tx time difference 12g35.1.16 IEEE 802.11 WLAN RSSI . 13g35.1.17 MBSFN Reference Signal Received Power (MBSFN RSRP) 13g35.1.18 MBSFN Reference Signal Received Quality (MBSFN RSRQ) . 14g35.1.19 Mu

20、lticast Channel Block Error Rate (MCH BLER) . 14g35.1.20 CSI Reference Signal Received Power (CSI-RSRP) 14g35.1.21 Sidelink Reference Signal Received Power (S-RSRP) . 15g35.1.22 Sidelink Discovery Reference Signal Received Power (SD-RSRP) . 15g35.1.23 Reference signal-signal to noise and interferenc

21、e ratio (RS-SINR) 16g35.1.24 Received Signal Strength Indicator (RSSI) 16g35.1.25 SFN and subframe timing difference (SSTD) . 17g35.1.26 Narrowband Reference Signal Received Power (NRSRP) . 17g35.1.27 Narrowband Reference Signal Received Quality (NRSRQ) . 17g35.1.28 Sidelink Received Signal Strength

22、 Indicator (S-RSSI) . 18g35.1.29 PSSCH Reference Signal Received Power (PSSCH-RSRP) 18g35.1.30 Channel busy ratio (CBR) . 18g35.1.31 Channel occupancy ratio (CR) 19g35.2 E-UTRAN measurement abilities . 19g35.2.1 DL RS TX power 19g35.2.2 Received Interference Power 20g35.2.3 Thermal noise power 20g35

23、.2.4 Timing advance (TADV) . 20g35.2.5 eNB Rx Tx time difference 20g35.2.6 E-UTRAN GNSS Timing of Cell Frames for UE positioning 21g35.2.7 Angle of Arrival (AoA) 21g35.2.8 UL Relative Time of Arrival (TUL-RTOA) . 21g3ETSI ETSI TS 136 214 V14.4.0 (2018-01)43GPP TS 36.214 version 14.4.0 Release 14Anne

24、x A (informative): Change history . 22g3History 24g3ETSI ETSI TS 136 214 V14.4.0 (2018-01)53GPP TS 36.214 version 14.4.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing w

25、ork within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented

26、to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only cha

27、nges have been incorporated in the document. ETSI ETSI TS 136 214 V14.4.0 (2018-01)63GPP TS 36.214 version 14.4.0 Release 141 Scope The present document contains the description and definition of the measurements done at the UE and network in order to support operation in idle mode and connected mod

28、e. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, sub

29、sequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP

30、TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.201: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical Layer General Description “. 3 3GPP TS 36.211: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and modulation“. 4 3GPP TS 36.212: “Evolved Univers

31、al Terrestrial Radio Access (E-UTRA); Multiplexing and channel coding “. 5 3GPP TS 36.213: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer procedures “. 6 3GPP TS 36.321: “Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access Control (MAC) protocol specification“. 7

32、 3GPP TS 36.331: “Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specification “. 8 3GPP2 CS.0005-D v1.0 “Upper Layer (Layer 3) Signaling Standard for CDMA2000 Spread Spectrum Systems Release D“. 9 3GPP2 CS.0024-A v3.0 “cdma2000 High Rate Packet Data Air

33、Interface Specification“ 10 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception “. 11 3GPP TS 36.355: “Evolved Universal Terrestrial Radio Access (E-UTRA); LTE Positioning Protocol (LPP)“ 12 3GPP TS 36.455: “Evolved Universal Terre

34、strial Radio Access (E-UTRA); LTE Positioning Protocol A (LPPa)“ 13 3GPP TS 36.459: “Evolved Universal Terrestrial Radio Access (E-UTRA); SLm Application Protocol (SLmAP)“ 14 3GPP TS 36.111: “Evolved Universal Terrestrial Radio Access (E-UTRA); Location Measurement Unit (LMU) performance specificati

35、on; Network Based Positioning Systems in E-UTRAN“ 15 IEEE 802.11, Part 11: “Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications, IEEE Std.“. ETSI ETSI TS 136 214 V14.4.0 (2018-01)73GPP TS 36.214 version 14.4.0 Release 1416 3GPP TS 36.304: “Evolved Universal Terrestrial R

36、adio Access (E-UTRA); User Equipment (UE) procedures in idle mode “. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over

37、 the definition of the same term, if any, in TR 21.905 1. 3.2 Symbols For the purposes of the present document, the following symbols apply: Ec/No Received energy per chip divided by the power density in the band 3.3 Abbreviations For the purposes of the present document, the abbreviations given in

38、TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. 1x RTT CDMA2000 1x Radio Transmission Technology CPICH Common Pilot Channel E-SMLC Enhanced Serving Mobile Location Centre E-UTR

39、A Evolved UTRA E-UTRAN Evolved UTRAN FDD Frequency Division Duplex GNSS Global Navigation Satellite System GSM Global System for Mobile communication HRPD CDMA2000 High Rate Packet Data LMU Location Measurement Unit P-CCPCH Primary Common Control Physical Channel RSCP Received Signal Code Power RSRP

40、 Reference Signal Received Power RSRQ Reference Signal Received Quality RSSI Received Signal Strength Indicator RSTD Reference Signal Time Difference SRS Sounding Reference Signal TDD Time Division Duplex UTRA Universal Terrestrial Radio Access UTRAN Universal Terrestrial Radio Access Network 4 Cont

41、rol of UE/E-UTRAN measurements In this chapter the general measurement control concept of the higher layers is briefly described to provide an understanding on how L1 measurements are initiated and controlled by higher layers. With the measurement specifications L1 provides measurement capabilities

42、for the UE and E-UTRAN. These measurements can be classified in different reported measurement types: intra-frequency, inter-frequency, inter-system, traffic volume, quality and UE internal measurements (see the RRC Protocol 7). ETSI ETSI TS 136 214 V14.4.0 (2018-01)83GPP TS 36.214 version 14.4.0 Re

43、lease 14In the L1 measurement definitions, see chapter 5, the measurements are categorised as measurements in the UE (the messages for these will be described in the MAC Protocol 6 or RRC Protocol 7 or LPP Protocol 11) or measurements in the E-UTRAN (the messages for these will be described in the F

44、rame Protocol or LPPa Protocol 12). To initiate a specific measurement, the E-UTRAN transmits a RRC connection reconfiguration message to the UE including a measurement ID and type, a command (setup, modify, release), the measurement objects, the measurement quantity, the reporting quantities and th

45、e reporting criteria (periodical/event-triggered), see 7 or E-SMLC transmits an LPP Request Location Information message to UE, see 11. When the reporting criteria are fulfilled the UE shall answer with a measurement report message to the E-UTRAN including the measurement ID and the results or an LP

46、P Provide Location Information message to the E-SMLC, see 11. For idle mode, the measurement information elements are broadcast in the System Information. 5 Measurement capabilities for E-UTRA In this chapter the physical layer measurements reported to higher layers are defined. 5.1 UE measurement c

47、apabilities The structure of the table defining a UE measurement quantity is shown below. Column field Comment Definition Contains the definition of the measurement. Applicable for States in which state(s) it shall be possible to perform this measurement. The following terms are used in the tables:

48、RRC_IDLE; RRC_CONNECTED; Intra-frequency appended to the RRC state: Shall be possible to perform in the corresponding RRC state on an intra-frequency cell; Inter-frequency appended to the RRC state: Shall be possible to perform in the corresponding RRC state on an inter-frequency cell Inter-RAT appe

49、nded to the RRC state: Shall be possible to perform in the corresponding RRC state on an inter-RAT cell. ETSI ETSI TS 136 214 V14.4.0 (2018-01)93GPP TS 36.214 version 14.4.0 Release 145.1.1 Reference Signal Received Power (RSRP) Definition Reference signal received power (RSRP), is defined as the linear average over the power contributions (in W) of the resource elements that carry cell-specific reference signals within the considered measurement frequency bandwidth. For RSRP determination the cell-specif