ETSI TS 136 521-3-2017 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) conformance specification Radio transmission and reception Part 3 Radio Resource .pdf

1、 ETSI TS 136 521-3 V13.1.0 (2017-03) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 3: Radio Resource Management (RRM) conformance testing (3GPP TS 36.521-3 version 13.1.0 Release 13) TECHNICAL SPECIFICA

2、TION ETSI ETSI TS 136 521-3 V13.1.0 (2017-03)13GPP TS 36.521-3 version 13.1.0 Release 13Reference RTS/TSGR-0536521-3vd10 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association b

3、ut non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versio

4、ns of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a speci

5、fic network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you fi

6、nd errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfi

7、lm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights res

8、erved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned b

9、y the GSM Association. ETSI ETSI TS 136 521-3 V13.1.0 (2017-03)23GPP TS 36.521-3 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is public

10、ly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI W

11、eb server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or ma

12、y become, essential to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference betw

13、een GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2

14、 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 521-3 V13.1.0 (2017-03)33GPP TS 36.521-3 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3For

15、eword . 2g3Modal verbs terminology 2g3Foreword . 90g3Introduction 90g31 Scope 91g32 References 91g33 Definitions, symbols and abbreviations . 92g33.1 Definitions 92g33.2 Symbols 94g33.3 Abbreviations . 95g33.4 Void 97g33.5 Additional notation . 97g33.5.1 Groups of bands 97g33A Requirements for suppo

16、rt of RRM . 98g33A.1 General . 98g33A.2 Requirements Classification for Statistical Testing 98g33A.3 RRM Test Configurations 98g33A.3.1 UE with Single or Multiple Antenna Connector . 98g33A.3.2 Test configuration for Inter band test cases 99g33A.3.3 Test configuration for Inter RAT test cases 99g33A

17、.3.4 UE with Multiband Capability 99g33A.3.5 E-UTRAN operating band configuration 99g33A.3.6 CA configuration 100g33A.3.7 HD-FDD category 0 testing 100g33A.4 Antenna Configuration . 100g33A.4.1 Antenna connection for 4 Rx capable UEs . 100g33A.4.1.1 Introduction . 100g33A.4.1.2 Principle of testing

18、101g33A.4.1.2.1 Single carrier tests . 101g33A.4.1.2.2 Carrier aggregation and Dual connectivity tests 101g33A.4.1.2.3 Antenna connection for bands where 2RX is supported 102g33A.4.1.2.4 Antenna connection for bands where 4RX is supported 102g33A.5 Test Cases for Synchronous and Asynchronous Dual Co

19、nnectivity 102g33A.5.1 Introduction. 102g33A.5.2 Principle of Testing . 103g34 E-UTRAN RRC_IDLE State Mobility 103g34.1 E-UTRAN Cell Selection . 103g34.2 E-UTRAN Cell Re-Selection . 103g34.2.1 E-UTRAN FDD - FDD cell re-selection intra frequency case . 103g34.2.1.1 Test purpose 103g34.2.1.2 Test appl

20、icability . 103g34.2.1.3 Minimum conformance requirements . 103g34.2.1.4 Test description . 104g34.2.1.4.1 Initial conditions 104g34.2.1.4.2 Test procedure . 105g34.2.1.4.3 Message contents. 106g34.2.1.5 Test requirement . 106g34.2.2 E-UTRAN TDD - TDD cell re-selection intra frequency case . 108g34.

21、2.2.1 Test purpose 108g34.2.2.2 Test applicability . 108g34.2.2.3 Minimum conformance requirements . 108g3ETSI ETSI TS 136 521-3 V13.1.0 (2017-03)43GPP TS 36.521-3 version 13.1.0 Release 134.2.2.4 Test description . 109g34.2.2.4.1 Initial conditions 109g34.2.2.4.2 Test procedure . 109g34.2.2.4.3 Mes

22、sage contents. 110g34.2.2.5 Test requirement . 111g34.2.3 E-UTRAN FDD - FDD cell re-selection inter frequency case . 112g34.2.3.1 Test purpose 112g34.2.3.2 Test applicability . 112g34.2.3.3 Minimum conformance requirements . 112g34.2.3.4 Test description . 113g34.2.3.4.1 Initial conditions 113g34.2.

23、3.4.2 Test procedure . 114g34.2.3.4.3 Message contents. 115g34.2.3.5 Test requirement . 115g34.2.4 E-UTRAN FDD - TDD cell re-selection inter frequency case . 118g34.2.4.1 Test purpose 118g34.2.4.2 Test applicability . 118g34.2.4.3 Minimum conformance requirements . 118g34.2.4.4 Test description . 11

24、9g34.2.4.4.1 Initial conditions 119g34.2.4.4.2 Test procedure . 120g34.2.4.4.3 Message contents. 121g34.2.4.5 Test requirement . 121g34.2.5 E-UTRAN TDD - FDD cell re-selection inter frequency case . 124g34.2.5.1 Test purpose 124g34.2.5.2 Test applicability . 124g34.2.5.3 Minimum conformance requirem

25、ents . 124g34.2.5.4 Test description . 125g34.2.5.4.1 Initial conditions 125g34.2.5.4.2 Test procedure . 126g34.2.5.4.3 Message contents. 127g34.2.5.5 Test requirement . 127g34.2.6 E-UTRAN TDD - TDD cell re-selection inter frequency case . 130g34.2.6.1 Test purpose 130g34.2.6.2 Test applicability .

26、130g34.2.6.3 Minimum conformance requirements . 130g34.2.6.4 Test description . 131g34.2.6.4.1 Initial conditions 131g34.2.6.4.2 Test procedure . 132g34.2.6.4.3 Message contents. 133g34.2.6.5 Test requirement . 133g34.2.7 E-UTRAN FDD FDD Inter frequency case in the existence of non-allowed CSG cell

27、136g34.2.7.1 Test purpose 136g34.2.7.2 Test applicability . 136g34.2.7.3 Minimum conformance requirements . 136g34.2.7.4 Test description . 137g34.2.7.4.1 Initial conditions 137g34.2.7.4.2 Test procedure . 138g34.2.7.4.3 Message contents. 139g34.2.7.5 Test requirement . 141g34.2.8 E-UTRAN TDD TDD In

28、ter frequency case in the existence of non-allowed CSG cell 143g34.2.8.1 Test purpose 143g34.2.8.2 Test applicability . 143g34.2.8.3 Minimum conformance requirements . 143g34.2.8.4 Test description . 144g34.2.8.4.1 Initial conditions 144g34.2.8.4.2 Test procedure . 145g34.2.8.4.3 Message contents. 1

29、46g34.2.8.5 Test requirement . 148g34.2.9 E-UTRAN FDD - FDD intra frequency cell re-selection case for 5MHz bandwidth . 150g34.2.9.1 Test purpose 150g34.2.9.2 Test applicability . 150g3ETSI ETSI TS 136 521-3 V13.1.0 (2017-03)53GPP TS 36.521-3 version 13.1.0 Release 134.2.9.3 Minimum conformance requ

30、irements . 150g34.2.9.4 Test description . 150g34.2.9.4.1 Initial conditions 150g34.2.9.4.2 Test procedure . 150g34.2.9.4.3 Message contents. 150g34.2.9.5 Test requirement . 151g34.2.12 E-UTRAN FDD FDD Intra frequency case for Cat-M1 UE in normal coverage 151g34.2.12.1 Test purpose 151g34.2.12.2 Tes

31、t applicability . 151g34.2.12.3 Minimum conformance requirements . 151g34.2.12.4 Test description . 152g34.2.12.4.1 Initial conditions 152g34.2.12.4.2 Test procedure . 153g34.2.12.4.3 Message contents . 154g34.2.12.5 Test requirement . 154g34.2.13 E-UTRAN HD FDD Intra frequency case for Cat-M1 UE in

32、 normal coverage 156g34.2.13.1 Test purpose 156g34.2.13.2 Test applicability . 156g34.2.13.3 Minimum conformance requirements . 156g34.2.13.4 Test description . 157g34.2.13.4.1 Initial conditions 157g34.2.13.4.2 Test procedure . 158g34.2.13.4.3 Message contents . 158g34.2.14 E-UTRAN TDD TDD Intra fr

33、equency case for Cat-M1 UE in normal coverage . 159g34.2.14.1 Test purpose 159g34.2.14.2 Test applicability . 159g34.2.14.3 Minimum conformance requirements . 159g34.2.14.4 Test description . 160g34.2.14.4.1 Initial conditions 160g34.2.14.4.2 Test procedure . 161g34.2.14.4.3 Message contents . 162g3

34、4.2.14.5 Test requirement . 163g34.2.13.5 Test requirement . 165g34.2.15 E-UTRAN FDD FDD Intra frequency case for Cat-M1 UE in enhanced coverage 167g34.2.15.1 Test purpose 167g34.2.15.2 Test applicability . 167g34.2.15.3 Minimum conformance requirements . 167g34.2.15.4 Test description . 168g34.2.15

35、.4.1 Initial conditions 168g34.2.15.4.2 Test procedure . 169g34.2.15.4.3 Message contents . 170g34.2.15.5 Test requirement . 170g34.2.16 E-UTRAN HD FDD Intra frequency case for Cat-M1 UE in enhanced coverage 172g34.2.16.1 Test purpose 172g34.2.16.2 Test applicability . 172g34.2.16.3 Minimum conforma

36、nce requirements . 172g34.2.16.4 Test description . 172g34.2.16.4.1 Initial conditions 172g34.2.16.4.2 Test procedure . 173g34.2.16.4.3 Message contents . 174g34.2.16.5 Test requirement . 174g34.2.17 E-UTRAN TDD TDD Intra frequency case for Cat-M1 UE in enhanced coverage 176g34.2.17.1 Test purpose 1

37、76g34.2.17.2 Test applicability . 176g34.2.17.3 Minimum conformance requirements . 176g34.2.17.4 Test description . 176g34.2.17.4.1 Initial conditions 176g34.2.17.4.2 Test procedure . 177g34.2.17.4.3 Message contents . 178g34.2.17.5 Test requirement . 179g34.3 E-UTRAN to UTRAN Cell Re-Selection 181g

38、34.3.1 E-UTRAN FDD - UTRAN FDD cell re-selection 181g3ETSI ETSI TS 136 521-3 V13.1.0 (2017-03)63GPP TS 36.521-3 version 13.1.0 Release 134.3.1.1 E-UTRA FDD - UTRAN FDD cell reselection: UTRA FDD is of higher priority 181g34.3.1.1.1 Test purpose 181g34.3.1.1.2 Test applicability . 181g34.3.1.1.3 Mini

39、mum conformance requirements 181g34.3.1.1.4 Test description . 182g34.3.1.1.4.1 Initial conditions 182g34.3.1.1.4.2 Test procedure 182g34.3.1.1.4.3 Message contents . 183g34.3.1.1.5 Test requirement 184g34.3.1.2 E-UTRAN FDD - UTRAN FDD cell re-selection: UTRA FDD is of lower priority . 186g34.3.1.2.

40、1 Test purpose 186g34.3.1.2.2 Test applicability . 186g34.3.1.2.3 Minimum conformance requirements 187g34.3.1.2.4 Test description . 187g34.3.1.2.4.1 Initial conditions 187g34.3.1.2.4.2 Test procedure 188g34.3.1.2.4.3 Message contents . 188g34.3.1.2.5 Test requirement 189g34.3.1.3 E-UTRAN FDD - UTRA

41、N FDD cell re-selection in fading propagation conditions: UTRA FDD is of lower priority . 191g34.3.1.3.1 Test purpose 191g34.3.1.3.2 Test applicability . 191g34.3.1.3.3 Minimum conformance requirements 192g34.3.1.3.4 Test description . 192g34.3.1.3.4.1 Initial conditions 192g34.3.1.3.4.2 Test proced

42、ure 193g34.3.1.3.4.3 Message contents . 194g34.3.1.3.5 Test requirement 195g34.3.1.4 E-UTRAN FDD - UTRAN FDD cell re-selection: UTRA FDD is of lower priority for 5MHz bandwidth 199g34.3.1.4.1 Test purpose 199g34.3.1.4.2 Test applicability . 200g34.3.1.4.3 Minimum conformance requirements 200g34.3.1.

43、4.4 Test description . 200g34.3.1.4.4.1 Initial conditions 200g34.3.1.4.4.2 Test procedure 200g34.3.1.4.4.3 Message contents . 200g34.3.1.4.5 Test requirement 201g34.3.2 E-UTRAN FDD - UTRAN TDD cell re-selection . 201g34.3.2.1 Test purpose 201g34.3.2.2 Test applicability . 201g34.3.2.3 Minimum confo

44、rmance requirements . 202g34.3.2.3.1 3.84Mcps TDD option . 202g34.3.2.3.2 1.28Mcps TDD option. 202g34.3.2.3.3 7.68Mcps TDD option . 202g34.3.2.4 Test description. 202g34.3.2.4.1 3.84Mcps TDD option . 202g34.3.2.4.2 1.28Mcps TDD option. 202g34.3.2.4.2.1 Initial conditions 202g34.3.2.4.2.2 Test proced

45、ure 203g34.3.2.4.2.3 Message contents . 204g34.3.2.4.3 7.68 Mcps TDD option 204g34.3.2.5 Test requirement . 205g34.3.2.5.1 3.84Mcps TDD option . 205g34.3.2.5.2 1.28Mcps TDD option. 205g34.3.2.5.3 7.68 Mcps TDD option 206g34.3.3 E-UTRAN TDD - UTRAN FDD cell re-selection . 206g34.3.3.1 Test purpose 20

46、6g34.3.3.2 Test applicability . 206g34.3.3.3 Minimum conformance requirements . 207g34.3.3.4 Test description . 207g34.3.3.4.1 Initial conditions 207g3ETSI ETSI TS 136 521-3 V13.1.0 (2017-03)73GPP TS 36.521-3 version 13.1.0 Release 134.3.3.4.2 Test procedure . 208g34.3.3.4.3 Message contents. 208g34

47、.3.3.5 Test requirement . 209g34.3.4 E-UTRAN TDD - UTRAN TDD cell re-selection . 211g34.3.4.1 E-UTRA TDD - UTRAN TDD cell re-selection: UTRA is of higher priority 211g34.3.4.1.1 Test purpose 211g34.3.4.1.2 Test applicability . 211g34.3.4.1.3 Minimum conformance requirements 212g34.3.4.1.4 Test descr

48、iption . 212g34.3.4.1.4.1 Initial conditions 212g34.3.4.1.4.2 Test procedure 213g34.3.4.1.4.3 Message contents . 214g34.3.4.1.5 Test requirement 215g34.3.4.2 E-UTRAN TDD - UTRAN TDD cell re-selection: UTRA is of lower priority 216g34.3.4.2.1 Test purpose 216g34.3.4.2.2 Test applicability . 217g34.3.

49、4.2.3 Minimum conformance requirements 217g34.3.4.2.4 Test description . 217g34.3.4.2.4.1 Initial conditions 217g34.3.4.2.4.2 Test procedure 218g34.3.4.2.4.3 Message contents . 219g34.3.4.2.5 Test requirement 219g34.3.4.3 EUTRA TDD-UTRA TDD cell reselection in fading propagation conditions: UTRA TDD is of lower priority. 221g34.3.4.3.1 Test purpose 221g34.3.4.3.2 Test applicability . 221g34.3.4.3.3 Minimum conformance requirements 221g34.3.4.3.4 Test description . 222g34.3.4.3.4.1 Initial conditions 222g34.3.4.3.4.2 Test procedure 223g34.3.4.3.4.3 Message cont