ETSI TS 137 113-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE E-UTRA UTRA and GSM EDGE Multi-Standard Radio.pdf

1、 ETSI TS 1Digital cellular telecommUniversal Mobile TelE-UTRA,Multi-Standard RElectromag(3GPP TS 37.1TECHNICAL SPECIFICATION137 113 V13.3.0 (2017mmunications system (Phase elecommunications System (LTE; A UTRA and GSM/EDGE; d Radio (MSR) Base Station (Bagnetic Compatibility (EMC) .113 version 13.3.0

2、 Release 1317-01) e 2+) (GSM); (UMTS); (BS) 13) ETSI ETSI TS 137 113 V13.3.0 (2017-01)13GPP TS 37.113 version 13.3.0 Release 13Reference RTS/TSGR-0437113vd30 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret

3、 N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The

4、 content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable

5、 Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.et

6、si.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or

7、mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunica

8、tions Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the G

9、SM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 137 113 V13.3.0 (2017-01)23GPP TS 37.113 version 13.3.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining

10、to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat.

11、Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ET

12、SI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UM

13、TS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“

14、, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in

15、 direct citation. ETSI ETSI TS 137 113 V13.3.0 (2017-01)33GPP TS 37.113 version 13.3.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 10g

16、33.3 Abbreviations . 10g34 Test conditions . 11g34.1 General . 11g34.2 Arrangements for establishing a communication link 11g34.2.1 Multiple enclosure BS solution . 12g34.3 Narrow band responses on receivers 12g34.4 Exclusion bands 13g34.4.1 Transmitter exclusion band . 13g34.4.2 Receiver exclusion

17、band . 13g34.5 BS test configurations 15g35 Performance assessment . 17g35.1 General . 17g35.2 Assessment of performance in Downlink . 18g35.3 Assessment of performance in Uplink 18g35.4 Ancillary equipment . 18g36 Performance criteria . 18g36.1 Performance criteria for continuous phenomena for BS 1

18、8g36.1.1 E-UTRA performance criteria 18g36.1.2 UTRA performance criteria 19g36.1.3 GSM/EDGE performance criteria . 20g36.1.3.1 GSM/EDGE downlink 20g36.1.3.1 GSM/EDGE uplnik . 20g36.1.4 NB-IoT performance criteria 20g36.2 Performance criteria for transient phenomena for BS 21g36.3 Performance criteri

19、a for continuous phenomena for Ancillary equipment . 21g36.4 Performance criteria for transient phenomena for Ancillary equipment 21g37 Applicability overview . 22g37.1 Emission . 22g37.2 Immunity 23g38 Emission . 23g38.1 Test configurations . 23g38.2 Radiated emission from Base Station and ancillar

20、y equipment 24g38.2.1 Radiated emission for Base Stations . 24g38.2.1.1 Definition 24g38.2.1.2 Test method . 24g38.2.1.3 Limits 24g38.2.1.4 Interpretation of the measurement results . 25g38.2.2 Radiated emission, ancillary equipment . 26g38.2.2.1 Definition 26g38.2.2.2 Test method . 26g38.2.2.3 Limi

21、ts 26g3ETSI ETSI TS 137 113 V13.3.0 (2017-01)43GPP TS 37.113 version 13.3.0 Release 138.3 Conducted emission DC power input/output port 26g38.3.1 Definition 26g38.3.2 Test method 27g38.3.3 Limits 27g38.4 Conducted emissions, AC mains power input/output port . 27g38.4.1 Definition 27g38.4.2 Test meth

22、od 27g38.4.3 Limits 27g38.5 Harmonic current emissions (AC mains input port) . 28g38.6 Voltage fluctuations and flicker (AC mains input port) . 28g38.7 Telecommunication ports . 28g38.7.1 Definition 28g38.7.2 Test method 28g38.7.3 Limits 29g39 Immunity 29g39.1 Test configurations . 29g39.2 RF electr

23、omagnetic field (80 MHz - 1000 MHz, 1400 MHz to 2700 MHz) 30g39.2.1 Definition 30g39.2.2 Test method and level . 30g39.2.3 Performance criteria 31g39.3 Electrostatic discharge 31g39.3.1 Definition 31g39.3.2 Test method and level . 31g39.3.3 Performance criteria 31g39.4 Fast transients common mode 31

24、g39.4.1 Definition 32g39.4.2 Test method and level . 32g39.4.3 Performance criteria 32g39.5 RF common mode (0,15 MHz - 80 MHz) 32g39.5.1 Definition 32g39.5.2 Test method and level . 32g39.5.3 Performance criteria 33g39.6 Voltage dips and interruptions 33g39.6.1 Definition 33g39.6.2 Test method and l

25、evel . 33g39.6.3 Performance criteria 33g39.7 Surges, common and differential mode 34g39.7.1 Definition 34g39.7.2 Test method and level . 34g39.7.2.1 Test method for telecommunication ports directly connected to outdoor cables 34g39.7.2.2 Test method for telecommunication ports connected to indoor c

26、ables . 34g39.7.2.3 Test method for AC power ports . 34g39.7.3 Performance criteria 35g3Annex A (normative): BER assessment for GSM/EDGE . 36g3A.1 Assessment of BER at the output of a transmitter 36g3A.1.1 Assessment of BER using static layer 1 functions . 36g3A.1.2 Assessment of BER using RXQUAL .

27、36g3A.2 Assessment of BER at the output of a receiver 36g3A.2.1 Assessment of BER using RXQUAL . 36g3A.2.2 Assessment of BER using reported BER . 36g3Annex B (informative): Change history . 37g3History 39g3ETSI ETSI TS 137 113 V13.3.0 (2017-01)53GPP TS 37.113 version 13.3.0 Release 13Foreword This T

28、echnical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-release

29、d by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is

30、incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 137 113 V13.3.0 (2017-01)63GPP TS 37.113 version 13.3.0 Release 131 Scope The present do

31、cument covers the assessment of E-UTRA, UTRA, GSM/EDGE and NB-IoT Multi-Standard Radio (MSR) Base Stations and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC). The present document specifies the applicable test conditions, performance assessment and performance crite

32、ria for E-UTRA, UTRA, GSM/EDGE and NB-IoT Base Stations and associated ancillary equipment in one of the following categories: - Multi-Standard Radio (MSR) Base Stations for E-UTRA, UTRA and GSM/EDGE meeting the requirements of TS 37.104 6, with conformance demonstrated by compliance to TS 37.141 11

33、. - Base Stations for E-UTRA meeting the requirements of TS 36.104 4, with conformance demonstrated by compliance to TS 36.141 9. - Base Stations for UTRA FDD meeting the requirements of TS 25.104 2, with conformance demonstrated by compliance to TS 25.141 7. - Base Stations for UTRA TDD meeting the

34、 requirements of TS 25.105 3, with conformance demonstrated by compliance to TS 25.142 8. - Base Stations for GSM/EDGE meeting the requirements of TS 45.005 5, with conformance demonstrated by compliance to TS 51.021 10. - Base Stations for NB-IoT meeting the requirements of TS 36.104 4, with confor

35、mance demonstrated by compliance to TS 36.141 9. In addition to MSR base stations, the present document covers other BS supporting more than one RAT. Technical requirements related to the antenna port of Base Stations are not included in the present document. These are found in the relevant product

36、standards 2-11. The environment classification used in the present document refers to the residential, commercial, and light industrial environment classification used in IEC 61000-6-1 12 and IEC 61000-6-3 13. The EMC requirements have been selected to ensure an adequate level of compatibility for a

37、pparatus at residential, commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. 2 References The following documents contain provisions which, through reference in this text, constitute pro

38、visions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a ref

39、erence to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 25.104: “Base Station (BS) radio transmission and rec

40、eption (FDD)“. 3 3GPP TS 25.105: “Base Station (BS) radio transmission and reception (TDD)“. 4 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception “. ETSI ETSI TS 137 113 V13.3.0 (2017-01)73GPP TS 37.113 version 13.3.0 Release 135

41、3GPP TS 45.005: “Radio transmission and reception“. 6 3GPP TS 37.104: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception“. 7 3GPP TS 25.141: “Base Station (BS) conformance testing (FDD)“. 8 3GPP TS 25.142: “Base Station (BS) conformance testing

42、(TDD)“. 9 3GPP TS 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing“. 10 3GPP TS 51.021: “Base Station System (BSS) equipment specification; Radio aspects“. 11 3GPP TS 37.141: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) c

43、onformance testing“ 12 IEC 61000-6-1: 2005: “Electromagnetic compatibility (EMC) - Part 6: Generic standards Section 1: Immunity for residential, commercial and light-industrial environments“. 13 IEC 61000-6-3: 2006/AMD1:2010: “Electromagnetic compatibility (EMC) - Part 6: Generic standards Section

44、3: Emission standard for residential, commercial and light industrial environments“. 14 IEC 60050-161: “International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility“. 15 ITU-R Recommendation SM.329: “Unwanted emissions in the spurious domain“. 16 ITU-R Recommendation SM.153

45、9 (2001): “Variation of the boundary between the out-of-band and spurious domains required for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329“. 17 CISPR 22: “Limits and methods of measurement of radio disturbance characteristics of information technology equipment“. 18 CISPR 16-1-

46、1: “Specification for radio disturbance and immunity measuring apparatus and methods - Measuring apparatus“. 19 IEC 61000-3-2 (2004): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current 16 A)“. 20 IEC 61000-3-12 (2005): “E

47、lectromagnetic compatibility (EMC) - Part 3-12: Limits- Limits for harmonic current produced by equipment connected to public low-voltage system with input current 16 A and 75 A“. 21 IEC 61000-3-3 (2002): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage fluctu

48、ations and flicker in low-voltage supply systems for equipment with rated current 16 A“. 22 IEC 61000-3-11 (2000): “Electromagnetic compatibility (EMC) - Part 3-11: Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 75 A and subject t

49、o conditional connections“. 23 IEC 61000-4-3: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-frequency electromagnetic field immunity test“. 24 IEC 61000-4-2: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test“. 25 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast tr