ETSI TS 137 144-2017 Universal Mobile Telecommunications System (UMTS) LTE Digital cellular telecommunications system (Phase 2+) (GSM) User Equipment (UE) and Mobile Station (MS) G.pdf

1、 ETSI TS 137 144 V14.2.0 (2017-06) Universal Mobile Telecommunications System (UMTS); LTE; Digital cellular telecommunications system (Phase 2+) (GSM); User Equipment (UE) and Mobile Station (MS) GSM, UTRA and E-UTRA over the air performance requirements (3GPP TS 37.144 version 14.2.0 Release 14) TE

2、CHNICAL SPECIFICATION ETSI ETSI TS 137 144 V14.2.0 (2017-06)13GPP TS 37.144 version 14.2.0 Release 14Reference RTS/TSGR-0437144ve20 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF

3、 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic

4、 and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) ver

5、sion kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableS

6、tatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including phot

7、ocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTEST

8、STM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are T

9、rade Marks registered and owned by the GSM Association. ETSI ETSI TS 137 144 V14.2.0 (2017-06)23GPP TS 37.144 version 14.2.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these esse

10、ntial IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest update

11、s are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server

12、) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities

13、 or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“

14、, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citat

15、ion. ETSI ETSI TS 137 144 V14.2.0 (2017-06)33GPP TS 37.144 version 14.2.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 6g31 Scope 7g32 References 7g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 8g33.3 Abbreviat

16、ions . 8g34 General . 8g34.1 Minimum requirements for roaming bands 8g34.2 Relationship between minimum requirements for roaming bands and test requirements 8g34.3 Terminal classes . 9g34.3.1 Mechanical modes 9g34.4 UTRA chip rates . 9g35 Frequency bands . 9g35.1 GSM frequency bands 9g35.2 UTRA FDD

17、frequency bands . 9g35.3 UTRA TDD frequency bands . 10g35.4 E-UTRA FDD frequency bands . 10g35.5 E-UTRA TDD frequency bands . 10g36 Transmitter total radiated power 11g36.1 Minimum requirement for roaming bands for handheld UE 11g36.1.1 Beside the head phantom position 11g36.1.1.1 GSM 12g36.1.1.2 UT

18、RA FDD . 12g36.1.1.3 UTRA LCR TDD 13g36.1.2 Beside the head and hand phantom position . 13g36.1.2.1 UTRA FDD . 13g36.1.2.2 UTRA LCR TDD 14g36.1.2.3 E-UTRA FDD . 14g36.1.2.4 E-UTRA TDD . 14g36.1.3 Hand phantom browsing mode position . 14g36.1.3.1 UTRA FDD . 14g36.1.3.2 UTRA LCR TDD 15g36.1.3.3 E-UTRA

19、 FDD . 15g36.1.3.4 E-UTRA TDD . 15g36.2 Minimum requirement for roaming bands for LME . 15g36.2.1 GSM 15g36.2.2 UTRA FDD 16g36.2.3 UTRA LCR TDD . 16g36.2.4 E-UTRA FDD . 17g36.2.5 E-UTRA TDD 17g36.3 Minimum requirement for roaming bands for LEE 17g36.3.1 GSM 17g36.3.2 UTRA FDD 17g36.3.3 UTRA LCR TDD

20、. 18g36.3.4 E-UTRA FDD . 19g36.3.5 E-UTRA TDD 19g37 Receiver total radiated sensitivity 19g37.1 Minimum requirement for roaming bands for handheld UE 19g3ETSI ETSI TS 137 144 V14.2.0 (2017-06)43GPP TS 37.144 version 14.2.0 Release 147.1.1 Beside the head phantom position 20g37.1.1.1 GSM 20g37.1.1.2

21、UTRA FDD . 20g37.1.1.3 UTRA LCR TDD 21g37.1.2 Beside the head and hand phantoms position . 21g37.1.2.1 UTRA FDD . 21g37.1.2.2 UTRA LCR TDD 22g37.1.2.3 E-UTRA FDD . 22g37.1.2.4 E-UTRA TDD . 22g37.1.3 Hand phantom browsing mode position . 22g37.1.3.1 UTRA FDD . 22g37.1.3.2 UTRA LCR TDD 23g37.1.3.3 E-U

22、TRA FDD . 23g37.1.3.4 E-UTRA TDD . 23g37.2 Minimum requirement for roaming bands for LME . 23g37.2.1 GSM 24g37.2.2 UTRA FDD 24g37.2.3 UTRA LCR TDD . 24g37.2.4 E-UTRA FDD . 25g37.2.5 E-UTRA TDD 25g37.3 Minimum requirement for roaming bands for LEE 25g37.3.1 GSM 25g37.3.2 UTRA FDD 26g37.3.3 UTRA LCR T

23、DD . 27g37.3.4 E-UTRA FDD . 27g37.3.5 E-UTRA TDD 27g38 Receiver total radiated multi-antenna sensitivity . 27g38.1 Minimum requirement for roaming bands for handheld UE 27g38.1.1 Free Space . 27g38.1.1.1 E-UTRA FDD . 28g38.1.1.2 E-UTRA TDD . 29g3Annex A (normative): Environmental conditions . 30g3A.

24、1 General . 30g3A.2 Environmental requirements 30g3A.2.2 Temperature . 30g3A.2.3 Voltage . 30g3Annex B (informative): Recommended performance . 31g3B.1 General . 31g3B.2 Transmitter total radiated power 31g3B.2.1 Recommended performance for handheld UE . 31g3B.2.1.1 Beside the head phantom position

25、31g3B.2.1.1.1 GSM 31g3B.2.1.1.2 UTRA FDD . 32g3B.2.1.1.3 UTRA LCR TDD 32g3B.2.1.2 Beside the head and hand phantoms position . 33g3B.2.1.2.1 UTRA FDD . 33g3B.2.1.2.2 UTRA LCR TDD 33g3B.2.1.2.3 E-UTRA FDD . 34g3B.2.1.2.4 E-UTRA TDD . 34g3B.2.1.3 Hand phantom browsing mode position . 34g3B.2.1.3.1 UTR

26、A FDD . 34g3B.2.1.3.2 UTRA LCR TDD 34g3B.2.1.3.3 E-UTRA FDD . 35g3B.2.1.3.4 E-UTRA TDD . 35g3B.2.2 Recommended performance for LME 35g3B.2.2.1 GSM 35g3B.2.2.2 UTRA FDD 35g3ETSI ETSI TS 137 144 V14.2.0 (2017-06)53GPP TS 37.144 version 14.2.0 Release 14B.2.2.3 UTRA LCR TDD . 35g3B.2.2.4 E-UTRA FDD . 3

27、6g3B.2.2.5 E-UTRA TDD 36g3B.2.3 Recommended performance for LEE . 36g3B.2.3.1 GSM 36g3B.2.3.2 UTRA FDD 36g3B.2.3.3 UTRA LCR TDD . 37g3B.2.3.4 E-UTRA FDD . 38g3B.2.3.5 E-UTRA TDD 38g3B.3 Receiver total radiated sensitivity 38g3B.3.1 Recommended performance for handheld UE . 38g3B.3.1.1 Beside the hea

28、d phantom position 38g3B.3.1.1.1 GSM 38g3B.3.1.1.2 UTRA FDD . 38g3B.3.1.1.3 UTRA LCR TDD 39g3B.3.1.2 Beside the head and hand phantoms position . 39g3B.3.1.2.1 UTRA FDD . 39g3B.3.1.2.2 UTRA LCR TDD 39g3B.3.1.2.3 E-UTRA FDD . 40g3B.3.1.2.4 E-UTRA TDD . 40g3B.3.1.3 Hand phantom browsing mode position

29、. 40g3B.3.1.3.1 UTRA FDD . 40g3B.3.1.3.2 UTRA LCR TDD 40g3B.3.1.3.3 E-UTRA FDD . 41g3B.3.1.3.4 E-UTRA TDD . 41g3B.3.2 Recommended performance for LME 41g3B.3.2.1 GSM 41g3B.3.2.2 UTRA FDD 41g3B.3.2.3 UTRA LCR TDD . 41g3B.3.2.4 E-UTRA FDD . 42g3B.3.2.5 E-UTRA TDD 42g3B.3.3 Recommended performance for

30、LEE . 42g3B.3.3.1 GSM 42g3B.3.3.2 UTRA FDD 42g3B.3.3.3 UTRA LCR TDD . 43g3B.3.3.4 E-UTRA FDD . 43g3B.3.3.5 E-UTRA TDD 43g3Annex C (informative): Change history . 44g3History 45g3ETSI ETSI TS 137 144 V14.2.0 (2017-06)63GPP TS 37.144 version 14.2.0 Release 14Foreword This Technical Specification has b

31、een produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identif

32、ying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes

33、of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 137 144 V14.2.0 (2017-06)73GPP TS 37.144 version 14.2.0 Release 141 Scope The present document establishes over the

34、air antenna minimum requirements for user equipment (UE) and mobile station (MS). Handheld UE requirements are defined for roaming bands for the speech position (beside the head and beside the head and hand) and hand phantom browsing mode position. Laptop mounted equipment requirements are defined f

35、or roaming bands for the data transfer position (laptop ground plane phantom). Laptop embedded equipment requirements are defined for roaming bands for the data transfer position (free space). All bands are potential roaming bands, and the requirements for roaming bands shall therefore be fulfilled

36、for all bands supported by a UE/MS. Requirements for operating bands are dependent on how the network has been built and are thus operator specific and cannot be specified here. Recommended performance values for operating bands (Annex B) are however included in this specification for information. I

37、t should be recognised that the ability to meet the recommended performance values depends on the number of frequency bands supported by the UE/MS. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References

38、 are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM docume

39、nt), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 25 101: “User Equipment (UE) radio transmission and reception (FDD)“. 3 3GPP TS 45.005: “Radio transmi

40、ssion and reception“. 4 3GPP TS 34.114: “User Equipment (UE) / Mobile Station (MS) Over The Air (OTA) antenna performance; Conformance testing“. 5 ETSI ETR 273: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and eval

41、uation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 2: Examples and annexes“. 6 3GPP TR 25.914: ”Measurements of radio performances for UMTS terminals in speech mode” 7 3GPP TR 37.977: “Verification of ra

42、diated multi-antenna reception performance of User Equipment (UE)” 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 , TR 37.977 7 and the following apply. A term defined in the present document takes pre

43、cedence over the definition of the same term, if any, in TR 21.905 1 or TR 37.977 7. ETSI ETSI TS 137 144 V14.2.0 (2017-06)83GPP TS 37.144 version 14.2.0 Release 14primary mechanical mode: the mode that is most often used during a call beside the head. Other mechanical modes are secondary. Every ter

44、minal has at least one primary mechanical mode. speech position: UE used close to head phantom (specific anthropomorphic mannequin). data transfer position: UE used away from the users head, applicable for LME and LEE devices. FS: UE used in a free space configuration. LME: Laptop mounted equipment

45、(such as plug-in devices like USB dongles). LEE: Laptop embedded equipment (such as embedded module card embedded in notebooks). 3.2 Symbols TRPaverage the average measured total radiated power of low, mid and high channel TRPmin the lowest measured total radiated power of each channel within an ope

46、rating band TRSaverage the average measured total radiated sensitivity of low, mid and high channel TRSmax the highest measured total radiated sensitivity of each channel within an operating band 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1, TR 3

47、7.977 7 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1 or TR 37.977 7 DUT Device Under Test OTA Over The Air TRMS Total Radiated Multi-antenna Sensitivity TRP Total Radiated Power TRS Tota

48、l Radiated Sensitivity 4 General 4.1 Minimum requirements for roaming bands The minimum requirements for roaming bands apply only to the primary mechanical mode in the environmental conditions specified in Annex A. All bands are potential roaming bands, and a UE/MS shall fulfil the minimum requireme

49、nts for roaming bands for all bands supported by the UE/MS. 4.2 Relationship between minimum requirements for roaming bands and test requirements The minimum requirements for roaming bands given in this specification make no allowance for measurement uncertainty. The test specification 34.114 4 Annex F defines test tolerances. These test tolerances are individually calculated for each test. The test tolerances are used to relax the minimum requirements in this specification to create test requirements. The measurement results returned by