ETSI TS 142 043-2016 Digital cellular telecommunications system (Phase 2+) Support of Localised Service Area (SoLSA) Service description Stage 1 (V13 0 0 3GPP TS 42 043 version 13 .pdf

1、 ETSI TS 1Digital cellular telecoSupport of LocSer(3GPP TS 42.0TECHNICAL SPECIFICATION142 043 V13.0.0 (2016communications system (Phao alised Service Area (SoLSAervice description; Stage 1 .043 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); SA); 13) TEM FOR ICATIONSRETSI ETSI TS

2、142 043 V13.0.0 (2016-01)13GPP TS 42.043 version 13.0.0 Release 13Reference RTS/TSGS-0142043vd00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregist

3、re la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present docume

4、nt shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within

5、 ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document,

6、 please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written

7、 permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM

8、and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI T

9、S 142 043 V13.0.0 (2016-01)23GPP TS 42.043 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-

10、members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Purs

11、uant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present doc

12、ument. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references

13、 to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “c

14、an“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 142 043 V13.0.0 (2016-01)33GPP TS 42.043 version

15、13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.3 Abbreviations . 7g34 Description . 8g34.

16、1 Defining subscriber information for localised service area 8g34.2 Service Features . 8g34.2.1 Localised service area indication 8g34.2.2 Localised service area support in idle mode (camping) 9g34.2.3 Localised service area support in active mode (handover) . 9g34.2.4 Exclusive access . 9g34.2.5 LS

17、A only access . 9g34.2.6 Preferential access. 9g35 Impact on other services . 9g35.1 General . 9g35.2 (Void) . 10g35.3 GPRS 10g35.4 Call Forwarding 10g35.5 Completion of Calls to Busy Subscriber (CCBS). 10g35 Exceptional procedures 10g36 Charging aspects 10g37 Commercial Role Model for SoLSA 11g3Ann

18、ex A (informative): Change history . 12g3History 13g3ETSI ETSI TS 142 043 V13.0.0 (2016-01)43GPP TS 42.043 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3GPP. The contents of the present document are subject to continuing work within the TSG and may change f

19、ollowing formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for a

20、pproval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification

21、; ETSI ETSI TS 142 043 V13.0.0 (2016-01)53GPP TS 42.043 version 13.0.0 Release 131 Scope This technical specification, specifies a mechanism, which can be used as a platform for providing special tariffs and/or special set of service features for certain subscribers within a regionally restricted ar

22、ea or areas. The motivation for this concept is to create means for network operators to build new service and tariff packages, which take into account subscriber groups and their needs. The localised service area is both an optional network feature and an optional UE feature. Usage and implementati

23、on of the different SoLSA service features may vary according to operators service packages. This feature is not intended to replace the existing method of cell selection, cell indication and handover. Support of Localised service area (SoLSA) is renamed Phase 2+ item Support of Home Area Priority N

24、ote: The present document covers description for GERAN support only. UTRAN support will be added in latter releases. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identifie

25、d by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference i

26、mplicitly refers to the latest version of that document in the same Release as the present document. 2.1 Normative references 1 3GPP TS 22.011: “ Service accessibility “. 2.2 Informative references 2 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. ETSI ETSI TS 142 043 V13.0.0 (2016-01)63GPP TS

27、 42.043 version 13.0.0 Release 133 Definitions and abbreviations 3.1 Definitions Localised Service Area (LSA): A localised service area consists of a cell or a number of cells within a PLMN. Cells being part of different localised service areas may have overlapping coverage areas. The cells constitu

28、ting a localised service area may not necessarily provide continuous coverage. Figure 1: Localised Service Area Subscribed to LSA: Set of LSAs, which the user has subscribed to. Valid LSA: A LSA ,whichthe user has subscribed to and his UE can receive service. Current LSA: The LSA where a UE is recei

29、ving service. LSA Priority: Priority of subscribers LSAs. When the user has several valid LSAs, the current LSA shall be selected by prioritising LSAs in case of overlapping LSAs. Figure 2: Localised Service Areas LSA only access: LSA user is allowed to access PLMN within his allowed LSAs. LSA user

30、is not allowed to receive and/or originate a call outside LSA area. A LSA of four cells.An overlapping cellnot part of LSALSA “A“ LSA “B“LSA “C“LSAs A, B and C areSubscribed to LSAsLSAs A and B areValid LSAsLSA A is Current LSA= SubscriberETSI ETSI TS 142 043 V13.0.0 (2016-01)73GPP TS 42.043 version

31、 13.0.0 Release 13Figure 3: LSA only access Exclusive Access: Access to exclusive access cells is restricted to defined LSA subscribers. Figure 4: Exclusive Access Preferential Access: LSA user shall have preferential access to resources of LSA cells, compared to non-LSA users. Figure 5: Preferentia

32、l Access 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: LSA Localised Service Area Further abbreviations may be found in TR 21.905 2. LSA only accessusers are notallowed to receiveand /or originatecalls.LSA only access cells.All subscribed servicesavai

33、lable to user.Public cell, allowedfor all users includingexclusive access users.Private cell, only allowed forusers with exclusive access.Public cell, capacityallowed on equalbasis for all users.Reserved resources forPreferential Access users.Limited capacity available to allother users.ETSI ETSI TS

34、 142 043 V13.0.0 (2016-01)83GPP TS 42.043 version 13.0.0 Release 134 Description The localised service area concept shall give the operator the basis to offer subscribers different services (e.g. tariffs or access rights) depending on the location of the subscriber. 4.1 Defining subscriber informati

35、on for localised service area A subscriber can have up to 20 LSAs per PLMN. It shall be possible to assign localised service areas to subscribers. Subscriber may have service, which contains several LSAs potentially belonging to different PLMNs. There shall be means to allocate LSA priority to each

36、subscriber independently by operator. Localised service areas for subscriber(s) may overlap, i.e. one cell may be part of several LSAs belonging to that subscriber. As an example, within a hierarchical cell structure, cells in different layers can constitute different localised service areas. A loca

37、lised service area could be defined so that it is possible to establish flexible sized areas, which are applicable to - a very small localised service area (“home area“ covering one or several cells dedicated e.g. to a residential subscriber or a company); or - a large area covering a part of the ci

38、ty (one or several location areas); or - a combination of these. Thus it is possible to use the various radio network configurations. The definition of location areas and the definition of localised service areas may be independent of each other. 4.2 Service Features Following service features are b

39、uilding blocks for SoLSA based services. It is up to the operator to decide which service features are required for a specific service. - Localised service area indication. - Localised service area support in idle mode (camping). - Localised service area support in active mode (handover). - LSA only

40、 access. - Exclusive access. - Preferential access. 4.2.1 Localised service area indication It shall be possible to assign a subscriber defined identifier by the operator to each LSA (alphanumeric text up to 10 characters), which can be provided to the user in idle and active mode. As a UE manufactu

41、rer option the user may assign an icon or another form of indication to each LSA. It shall be possible to indicate a change of localised service area during idle and active mode. The indication is a network option (activated/deactivated by the network). ETSI ETSI TS 142 043 V13.0.0 (2016-01)93GPP TS

42、 42.043 version 13.0.0 Release 134.2.2 Localised service area support in idle mode (camping) The PLMN shall determine, which cells, belonging to the LSA, are to be favoured by the UE when camping. When camping on a cell in idle mode, the subscribers mobile station shall use the information provided

43、by the PLMN in selecting cells belonging to his localised service area. The mobile station shall have the ability to reselect a cell in a different LSA with higher priority. This favouring shall not degrade the overall service quality. There should be no extra delay in cell selection procedure. 4.2.

44、3 Localised service area support in active mode (handover) The PLMN shall determine, which cells, belonging to the LSA, are to be favoured during active mode. The cells belonging to users LSAs shall be favoured at call setup and when handovers are carried out. This favouring shall not degrade the ov

45、erall service quality. 4.2.4 Exclusive access For a cell belonging to one or more service areas and where only one or more specific subscribers shall have allowed access, other subscriber“s mobile stations shall be prevented from using the cell to obtain any service, other than TS12 (Emergency Calls

46、). NOTE: This does not prevent other subscribers mobile stations from camping on the cell to perform Location Updating. Handovers into cells belonging to localised service areas where only specific subscribers shall have allowed access, shall be possible to be prevented for other subscribers, if req

47、uired by a SoLSA application. 4.2.5 LSA only access With access allowed only within one or more localised service areas, it shall be possible to prevent receiving and/or originating basic services from non-LSA cells. SMS and Supplementary service operations are allowed in all areas. It shall be poss

48、ible to prevent handovers to cells not belonging to allowed localised service areas, if required by a SoLSA application. 4.2.6 Preferential access It shall be possible to allocate resources at call setup and during the active mode to LSA users, if required by a SoLSA application. NOTE: An example of

49、 a requirement: the last traffic channel is not allocated to non-LSA user or in case of congestion an ongoing call of a non-LSA user is released and replaced with a call of a LSA user. 5 Impact on other services 5.1 General SoLSA is not limited to specific services and there are no modifications necessary for existing services. In particular there shall be no impact to Emergency Call (TS12). LSA should be able to support all tele, bearer and supplementary services .There is no interaction to supplementary services except those specified below. ETSI ETSI T