ETSI TS 143 130-2016 Digital cellular telecommunications system (Phase 2+) Iur-g interface Stage 2 (V13 0 0 3GPP TS 43 130 version 13 0 0 Release 13)《数字蜂窝通信系统(第2+阶段) Iur-g接口 第2阶段(V.pdf

1、 ETSI TS 1Digital cellular teleco(3GPP TS 43.1TECHNICAL SPECIFICATION143 130 V13.0.0 (2016communications system (PhaIur-g interface; Stage 2 .130 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); 13) TEM FOR ICATIONSRETSI ETSI TS 143 130 V13.0.0 (2016-01)13GPP TS 43.130 version 13.0

2、.0 Release 13Reference RTS/TSGG-0143130vd00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Importa

3、nt notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written au

4、thorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document shou

5、ld be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following ser

6、vices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version s

7、hall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered

8、for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 143 130 V13.0.0 (2016-01)23GPP TS 43.130 version 13

9、.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intell

10、ectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, includ

11、ing IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has

12、 been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross re

13、ference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described i

14、n clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 143 130 V13.0.0 (2016-01)33GPP TS 43.130 version 13.0.0 Release 13Contents Intellectual Property Right

15、s 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Symbols 6g33.3 Abbreviations . 6g34 Motivation, principles and assumptions . 7g34.1 Motivation 7g34.2 Principles 7g34.3 Void 8g35 General aspect

16、s . 8g35.1 Network architecture 8g35.1.1 General 8g35.1.2 MS Identifiers in Iu mode . 9g35.1.3 MS Identifiers in A/Gb mode . 10g35.2 Iur-g interface capabilities 10g36 IurInterface Protocols . 10g36.1 General . 10g36.2 Functions of the Iur-g interface protocols 11g36.3 Iur-g Interface protocol struc

17、ture 11g36.4 Radio signalling protocols 12g37 Radio Network Layer: RNSAP protocol 12g37.1 General . 12g37.2 Basic mobility procedures 13g37.2.1 General 13g37.2.2 Paging . 13g37.2.3 Cell Update . 14g37.2.4 Registration Area Update 15g37.2.5 RRC Connection Release 16g37.2.6 Radio Resource Reserve Hand

18、over 16g37.2.6.1 General 16g37.2.6.2 Successful operation 17g37.2.6.3 Abnormal conditions . 18g37.2.6.3.1 BSS Radio Resource Reservation Failure . 18g37.2.6.3.2 Handover failure from MS/UE 19g37.3 Void 20g37.4 Global procedures. 20g37.4.1 General 20g37.4.2 Error Indication . 20g37.4.3 Common Measure

19、ment Functions 20g37.4.4 Information Exchange Functions 21g3Annex A (Informative): Change history . 22g3History 23g3ETSI ETSI TS 143 130 V13.0.0 (2016-01)43GPP TS 43.130 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP).

20、The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number

21、as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, update

22、s, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 143 130 V13.0.0 (2016-01)53GPP TS 43.130 version 13.0.0 Release 131 Scope The present document provides an overview of the Iur-g interface. It describes the motivation, principle

23、s and functionality of this interface. It does not contain the detailed description, which it is included in the stage 3 Technical Specifications. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References

24、are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM documen

25、t), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905, 3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; Vocabulary for 3GPP Specifications 2 3GPP TS 23.236, 3rd

26、 Generation Partnership Project; Technical Specification Group Services and System Aspects; Intra-domain connection of Radio Access Network (RAN) nodes to multiple Core Network (CN) nodes 3 3GPP TS 25.331, 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; RRC Pr

27、otocol Specification 4 3GPP TS 25.420, 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; UTRAN Iur Interface General Aspects and Principles 5 3GPP TS 25.423, 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; UTRAN Iur Interf

28、ace RNSAP Signalling 6 3GPP TS 43.051, Technical Specification 3rd Generation Partnership Project; Technical Specification Group GSM/EDGE Radio Access Network; Overall description - Stage 2; (Release 5) 7 3GPP TS 44.118, 3rd Generation Partnership Project; Technical Specification Group GSM EDGE Radi

29、o Access Network; Mobile radio interface layer 3 specification, Radio Resource Control Protocol (RRC); Iu mode 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following ones apply: A/Gb mod

30、e: mode of operation of the MS when connected to the Core Network via GERAN and the A and/or Gb interfaces. MS: Unless stated otherwise, this refers with no distinction to both MS and UE. ETSI ETSI TS 143 130 V13.0.0 (2016-01)63GPP TS 43.130 version 13.0.0 Release 13Iu mode: mode of operation of the

31、 MS when connected to the Core Network via GERAN or UTRAN and the Iu interface. RAN node: a BSS or a RNC. 3.2 Symbols For the purposes of the present document, the following symbols apply: A Interface between a BSS and an MSC Gb Interface between a BSS and an SGSN Iu Interface between a BSS/RNC and

32、the CN Iur Interface between two RNSs Iur-g Interface between two BSSs or between a BSS and an RNS Um Interface between a GERAN MS and a BSS Uu Interface between a UE and the RNS 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: BSC Base Station Controlle

33、r BSS Base Station Sub-system CBSS Controlling Base Station Sub-system CN Core Network CRNC Controlling Radio Network Controller GERAN GSM/EDGE Radio Access Network GPRS General Packet Radio Service GRA GERAN Registration Area LA Location Area MS Mobile StationMSC Mobile Switching Centre NACC Networ

34、k Assisted Cell Change NNSF NAS Node Selection Function RA Routeing Area RAN Radio Access Network RNC Radio Network Controller RNS Radio Network Sub-system RNSAP Radio Network Subsystem Application Part RNTI Radio Network Temporary Identity RRA RAN Registration Area RRM Radio Resource Management SBS

35、C Serving BSC SBSS Serving BSS SGSN Serving GPRS Support Node SRNC Serving RNC TBSS Target BSS UE User Equipment UMTS Universal Mobile Telephony System URA UTRAN Registration Area UTRAN UMTS Terrestrial Radio Access Network ETSI ETSI TS 143 130 V13.0.0 (2016-01)73GPP TS 43.130 version 13.0.0 Release

36、 134 Motivation, principles and assumptions 4.1 Motivation As part of the work to connect GERAN via the Iu interface to the CN, the GRA and RNTI concepts have also been adopted for the GERAN. With these concepts, an inactive mobile in the RRC-GRA_PCH state (see 3GPP TS 44.118 7) will perform signall

37、ing to the network whenever it changes the GRA. Since GRAs need not be constrained by BSC coverage areas, it is possible that the MS reselects a cell on a different BSC but on the same GRA. In order maintain the ability to page the mobile in the GRA with the correct RNTI, as well as to enable a path

38、 for a GRA update procedure with the serving BSC, it is necessary to have an Iur-g interface between the BSSs. The same principle applies for dual-RAN capable mobiles. The architecture specifications permit network operators to design networks that alleviate the potential problem caused by dual mode

39、 mobiles frequently toggling between UTRAN and GERAN coverage areas (e.g. in indoor coverage situations): for instance, common LAIs and RAIs for GERAN and UTRAN cells in the same geographical area. Defining GERAN and UTRAN cells in common LAs and RAs permits an inactive mobile to change from GERAN t

40、o UTRAN coverage or, vice versa, without any signalling to the network. Prior to Release 5, this is possible because GSM/GPRS is does not use the connection oriented Iu interface. From Release 5 on, an inactive MS would signal to the network when a cell change involving change of RAN takes place. To

41、 prevent this, operators may configure GRA IDs and URA IDs to indicate the same registration area. To enable paging across these registration areas, as well as to enable the possibility to perform GRA/URA update procedures with the serving BSC/RNC, it is necessary to have an Iur-g interface between

42、the BSS and the RNC. The definition of GRAs/URAs has the following benefits: - It increases the MT call success rate: by reducing the frequency of updates, it reduces the time during which the MS is believed by the RAN to be in the old registration area, when paging requests would fail. - It reduces

43、 the amount of signalling on the radio interface, since the mobile does not need to indicate cell changes when moving within a GRA/URA. - For the same reason, it reduces the amount of signalling in the network, thus decreasing the number of updates and of SRNC/SBSC relocation procedures. The Iur-g m

44、ay bring other benefits: - Support for the SRNC/SBSC relocation procedure: the current SRNS relocation procedure defined for UTRAN using the Iur interface could be reused, improving the performance of the procedure. The Cell Update and Relocation Commit messages could be transferred over this interf

45、ace. 4.2 Principles The Iur-g interface shall be designed based on the following principles: - The Iur-g interface shall be open. - From a logical standpoint, this interface is a point to point interface between one BSS and one BSS or RNC within a PLMN. From a physical point of view, the interface c

46、ould share Iu or other transmission resources. - The Iur-g interface is optional. The presence of the Iur-g shall be transparent to the MS: the 3GPP specifications shall ensure that all mobiles function correctly irrespective of the presence or absence of the Iur-g interface. - This interface shall

47、support the exchange of signalling information between a BSS and a BSC/RNC. The Iur-g interface shall not carry user information. - A GRA contains one or more GERAN cells and zero or more UTRAN cells. A URA contains one or more UTRAN cells and zero or more GERAN cells. NOTE: The term RAN Registratio

48、n Area (RRA) is used in this document to refer to a registration area irrespective of whether it contains GERAN cells, UTRAN cells or both types of cells. The terms GRA and URA will be used in GERAN and UTRAN specifications, respectively, where GRAs may contain UTRAN cells and URAs may contain GERAN

49、 cells. ETSI ETSI TS 143 130 V13.0.0 (2016-01)83GPP TS 43.130 version 13.0.0 Release 13- In Iu mode, the BSC has been allocated an identifier (BSC-Id) from the same pool of numbers as the RNC-Id. 4.3 Void 5 General aspects 5.1 Network architecture 5.1.1 General The Iur-g interface is the logical interface between two BSSs in Iu mode or between an RNS and a BSS in Iu mode or between a BSS in A/Gb mode and a UTRA-NTDD RNS. The different Iur-g interface combinations are depicted in Figure 1 and Figure 1a. UTRAN GERANIu 3G Core Network Iur-g