ETSI TS 144 001-2016 Digital cellular telecommunications system (Phase 2+) Mobile Station - Base Station System (MS - BSS) interface General aspects and principles (V13 0 0 3GPP TS.pdf

1、 ETSI TS 1Digital cellular telecoMobile Station - Base General (3GPP TS 44.0TECHNICAL SPECIFICATION144 001 V13.0.0 (2016communications system (Phae Station System (MS - BSS) ial aspects and principles .001 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); ) interface; 13) TEM FOR IC

2、ATIONSRETSI ETSI TS 144 001 V13.0.0 (2016-01)13GPP TS 44.001 version 13.0.0 Release 13Reference RTS/TSGC-0144001vd00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but n

3、on lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions o

4、f the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific

5、network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in t

6、he present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as a

7、uthorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM,

8、 PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Asso

9、ciation. ETSI ETSI TS 144 001 V13.0.0 (2016-01)23GPP TS 44.001 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for E

10、TSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/

11、ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essentia

12、l to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted

13、 as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “w

14、ill“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 144 001 V13.0.0 (2016-01)33GP

15、P TS 44.001 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g30a Scope 5g30b References 5g30c Definitons and abbreviations 6g31 General . 6g32 Interface applications . 6g33 Interface technical specification objectives 7g34 Interf

16、ace characteristics 7g35 Interface capabilities. 8g36 Technical Specifications on GSM MS-BSS interfaces 8g37 Protocol modelling principles 8g3Annex A (informative): Change History 11g3History 12g3ETSI ETSI TS 144 001 V13.0.0 (2016-01)43GPP TS 44.001 version 13.0.0 Release 13Foreword This Technical S

17、pecification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the T

18、SG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremente

19、d for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 144 001 V13.0.0 (2016-01)53GPP TS 44.001 version 13.0.0 Release 130a Scope The present document de

20、scribes the general aspects and principles relating to the Technical Specifications for the GSM MS-BSS interface. 0b References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified

21、by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference imp

22、licitly refers to the latest version of that document in the same Release as the present document. 1 Void. 1a 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.030: “Man-Machine Interface (MMI) of the User Equipment (UE)“. 3 3GPP TS 24.002: “GSM - UMTS Public Land Mobile Network (PL

23、MN) access reference configuration“. 4 3GPP TS 44.003: “Mobile Station - Base Station System (MS - BSS) interface; Channel structures and access capabilities“. 5 3GPP TS 44.004: “Layer 1; General requirements“. 6 3GPP TS 44.005: “Data Link (DL) layer; General aspects“. 7 3GPP TS 44.006: “Mobile Stat

24、ion - Base Station System (MS - BSS) interface; Data Link (DL) layer specification“. 8 3GPP TS 24.007: “Mobile radio interface signalling layer 3; General aspects“. 9 3GPP TS 24.008: “Mobile radio interface; Layer 3 specification; Core network protocols; Stage 3“. 10 3GPP TS 24.010: “Mobile radio in

25、terface layer 3; Supplementary services specification; General aspects“. 11 3GPP TS 24.011: “Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface“. 12 3GPP TS 44.012: “Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface“. 13 ITU-T Recommend

26、ation X.200: “Information technology - Open Systems Interconnection - Basic Reference Model: The basic model“. 14 ITU-T Recommendation X.210: “Information technology - Open systems interconnection - Basic Reference Model: Conventions for the definition of OSI services“. ETSI ETSI TS 144 001 V13.0.0

27、(2016-01)63GPP TS 44.001 version 13.0.0 Release 130c Definitons and abbreviations Abbreviations used in the present document are listed in 3GPP TR 21.905. 1 General 1.1 A GSM PLMN supports a wide range of services which a user accesses by a standard set of interfaces at a mobile station (MS). The mo

28、bile station is connected to the PLMN fixed infrastructure via a radio path to a base station, as shown in figure 1. 1.2 The MS-BSS interface on this radio path is specified in the 24- and 44-series of Technical Specifications in such a way as to permit user and network technologies and configuratio

29、ns to evolve separately. +-+ +-+ | | radio path | | PLMN MMI | | MS-BSS | | -+- fixed -+-| MS +-| BSS |infrastructure | | interface | | | | |(24-/44-series)| | +-+ +-+ Figure 1: Basic interfaces for user access for a GSM PLMN 1.3 The principles and procedures for the man-machine interface (MMI) to t

30、he MS are described in Technical Specification 3GPP TS 22.030. The user may also use standard terminal interfaces within the MS. The reference configuration for the access is described in Technical Specification 3GPP TS 24.002. 2 Interface applications Figure 2 shows some examples of the application

31、 of GSM MS-BSS interfaces. The following cases are shown: i) access of simple handportable or vehicle mounted MSs; ii) access of an MS with multiple terminal equipment installation; iii) access of a mobile PBX or LAN; In addition, the figure identifies internetwork interfaces for connections to: iv)

32、 land-line ISDN networks; v) dedicated service networks. ETSI ETSI TS 144 001 V13.0.0 (2016-01)73GPP TS 44.001 version 13.0.0 Release 13+-+ | Simple | | MS +-+ +-+ | | | | Dedicated | +-+ | | service | | +- - + + - - +-+ | | | |(N)-layer | | | | (N)-layer| | | +-+ - - - + + - +-+ | +-+ +-+ +-+ | +(N

33、)-layer peer-to-peer protocol Figure 5: Primitive action sequence for peer-to-peer communication The REQUEST primitive type is used when a higher layer is requesting a service from the next lower layer. The INDICATION primitive type is used by a layer providing a service to notify the next higher la

34、yer of activities related to the primitive type REQUEST. The RESPONSE primitive type is used by a layer to acknowledge receipt, from a lower layer, of the primitive type INDICATION. The CONFIRM primitive type is used by the layer providing the requested service to confirm that the activity has been

35、completed. ETSI ETSI TS 144 001 V13.0.0 (2016-01)113GPP TS 44.001 version 13.0.0 Release 13Annex A (informative): Change History Meeting No. TDoc. No. CR. No. Section affected New version Subject/Comments SMG#07 4.0.4 Phase 2 version SMG#20 5.0.0 Release 1996 version SMG#27 6.0.0 Release 1997 versio

36、n SMG#29 7.0.0 Release 1998 version SMG#31 8.0.0 Release 1999 version CN#11 4.0.0 Release 4 version NP-16 NP-020224 001 4.1.0 Various clean-up of wrong references NP-16 5.0.0 Plenary decision to make this TS also for Rel-5. NP-26 6.0.0 Plenary decision to make this TS also for Rel-6. 7.0.0 Plenary d

37、ecision to make this TS also for Rel-7. CP-42 8.0.0 Plenary decision to make this TS also for Rel-8. CP-46 9.0.0 Plenary decision to make this TS also for Rel-9. CP-51 10.0.0 Plenary decision to make this TS also for Rel-10. CP-57 11.0.0 Plenary decision to make this TS also for Rel-11. CP-65 12.0.0 Plenary decision to make this TS also for Rel-12. CP-70 13.0.0 Upgrade to Rel-13 ETSI ETSI TS 144 001 V13.0.0 (2016-01)123GPP TS 44.001 version 13.0.0 Release 13History Document history V13.0.0 January 2016 Publication