ETSI TS 144 001-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Mobile Station - Base Station System (MS - BSS) interface General aspects and principles (V14 0 0 3.pdf

1、 ETSI TS 144 001 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Station - Base Station System (MS - BSS) interface; General aspects and principles (3GPP TS 44.001 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ET

2、SI TS 144 001 V14.0.0 (2017-04)13GPP TS 44.001 version 14.0.0 Release 14Reference RTS/TSGC-0144001ve00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif en

3、registre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present

4、document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive

5、within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the p

6、resent document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as autho

7、rized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLU

8、GTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Associat

9、ion. ETSI ETSI TS 144 001 V14.0.0 (2017-04)23GPP TS 44.001 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI

10、members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.

11、etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to

12、 the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as

13、being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“

14、, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 144 001 V14.0.0 (2017-04)33GPP TS

15、 44.001 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g30a Scope 5g30b References 5g30c Definitons and abbreviations 5g31 General . 6g32 Interface applications . 6g33 Interface technical specification objectives 7g34 Interface

16、characteristics 7g35 Interface capabilities. 8g36 Technical Specifications on GSM MS-BSS interfaces 8g37 Protocol modelling principles 8g3Annex A (informative): Change History 11g3History 12g3ETSI ETSI TS 144 001 V14.0.0 (2017-04)43GPP TS 44.001 version 14.0.0 Release 14Foreword This Technical Speci

17、fication has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG w

18、ith an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented fo

19、r all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 144 001 V14.0.0 (2017-04)53GPP TS 44.001 version 14.0.0 Release 140a Scope The present document descri

20、bes the general aspects and principles relating to the Technical Specifications for the GSM MS-BSS interface. 0b References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by d

21、ate of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implici

22、tly refers to the latest version of that document in the same Release as the present document. 1 Void. 1a 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.030: “Man-Machine Interface (MMI) of the User Equipment (UE)“. 3 3GPP TS 24.002: “GSM - UMTS Public Land Mobile Network (PLMN)

23、access reference configuration“. 4 3GPP TS 44.003: “Mobile Station - Base Station System (MS - BSS) interface; Channel structures and access capabilities“. 5 3GPP TS 44.004: “Layer 1; General requirements“. 6 3GPP TS 44.005: “Data Link (DL) layer; General aspects“. 7 3GPP TS 44.006: “Mobile Station

24、- Base Station System (MS - BSS) interface; Data Link (DL) layer specification“. 8 3GPP TS 24.007: “Mobile radio interface signalling layer 3; General aspects“. 9 3GPP TS 24.008: “Mobile radio interface; Layer 3 specification; Core network protocols; Stage 3“. 10 3GPP TS 24.010: “Mobile radio interf

25、ace layer 3; Supplementary services specification; General aspects“. 11 3GPP TS 24.011: “Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface“. 12 3GPP TS 44.012: “Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface“. 13 ITU-T Recommendatio

26、n X.200: “Information technology - Open Systems Interconnection - Basic Reference Model: The basic model“. 14 ITU-T Recommendation X.210: “Information technology - Open systems interconnection - Basic Reference Model: Conventions for the definition of OSI services“. 0c Definitons and abbreviations A

27、bbreviations used in the present document are listed in 3GPP TR 21.905. ETSI ETSI TS 144 001 V14.0.0 (2017-04)63GPP TS 44.001 version 14.0.0 Release 141 General 1.1 A GSM PLMN supports a wide range of services which a user accesses by a standard set of interfaces at a mobile station (MS). The mobile

28、 station is connected to the PLMN fixed infrastructure via a radio path to a base station, as shown in figure 1. 1.2 The MS-BSS interface on this radio path is specified in the 24- and 44-series of Technical Specifications in such a way as to permit user and network technologies and configurations t

29、o evolve separately. +-+ +-+ | | radio path | | PLMN MMI | | MS-BSS | | -+- fixed -+-| MS +-| BSS |infrastructure | | interface | | | | |(24-/44-series)| | +-+ +-+ Figure 1: Basic interfaces for user access for a GSM PLMN 1.3 The principles and procedures for the man-machine interface (MMI) to the M

30、S are described in Technical Specification 3GPP TS 22.030. The user may also use standard terminal interfaces within the MS. The reference configuration for the access is described in Technical Specification 3GPP TS 24.002. 2 Interface applications Figure 2 shows some examples of the application of

31、GSM MS-BSS interfaces. The following cases are shown: i) access of simple handportable or vehicle mounted MSs; ii) access of an MS with multiple terminal equipment installation; iii) access of a mobile PBX or LAN; In addition, the figure identifies internetwork interfaces for connections to: iv) lan

32、d-line ISDN networks; v) dedicated service networks. ETSI ETSI TS 144 001 V14.0.0 (2017-04)73GPP TS 44.001 version 14.0.0 Release 14+-+ | Simple | | MS +-+ +-+ | | | | Dedicated | +-+ | | service | | +- - + + - - +-+ | | | |(N)-layer | | | | (N)-layer| | | +-+ - - - + + - +-+ | +-+ +-+ +-+ | +(N)-la

33、yer peer-to-peer protocol Figure 5: Primitive action sequence for peer-to-peer communication The REQUEST primitive type is used when a higher layer is requesting a service from the next lower layer. The INDICATION primitive type is used by a layer providing a service to notify the next higher layer

34、of activities related to the primitive type REQUEST. The RESPONSE primitive type is used by a layer to acknowledge receipt, from a lower layer, of the primitive type INDICATION. The CONFIRM primitive type is used by the layer providing the requested service to confirm that the activity has been comp

35、leted. ETSI ETSI TS 144 001 V14.0.0 (2017-04)113GPP TS 44.001 version 14.0.0 Release 14Annex A (informative): Change History Meeting No. TDoc. No. CR. No. Section affected New version Subject/Comments SMG#07 4.0.4 Phase 2 version SMG#20 5.0.0 Release 1996 version SMG#27 6.0.0 Release 1997 version SM

36、G#29 7.0.0 Release 1998 version SMG#31 8.0.0 Release 1999 version CN#11 4.0.0 Release 4 version NP-16 NP-020224 001 4.1.0 Various clean-up of wrong references NP-16 5.0.0 Plenary decision to make this TS also for Rel-5. NP-26 6.0.0 Plenary decision to make this TS also for Rel-6. 7.0.0 Plenary decis

37、ion to make this TS also for Rel-7. CP-42 8.0.0 Plenary decision to make this TS also for Rel-8. CP-46 9.0.0 Plenary decision to make this TS also for Rel-9. CP-51 10.0.0 Plenary decision to make this TS also for Rel-10. CP-57 11.0.0 Plenary decision to make this TS also for Rel-11. CP-65 12.0.0 Ple

38、nary decision to make this TS also for Rel-12. CP-70 13.0.0 Upgrade to Rel-13 Change history Date Meeting TDoc CR Rev Cat Subject/Comment New version 2017-03 SA#75 Upgrade to Rel-14 14.0.0 ETSI ETSI TS 144 001 V14.0.0 (2017-04)123GPP TS 44.001 version 14.0.0 Release 14History Document history V14.0.0 April 2017 Publication