1、 ETSI TS 1Digital cellular telecomm(3GPP TS 45.0TECHNICAL SPECIFICATION145 004 V13.1.0 (2016mmunications system (Phase Modulation .004 version 13.1.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-04) e 2+) (GSM); 13) TEM FOR ICATIONSRETSI ETSI TS 145 004 V13.1.0 (2016-04)13GPP TS 45.004 version 13.1.0 Relea
2、se 13Reference RTS/TSGG-0145004vd10 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notic
3、e The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizat
4、ion of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aw
5、are that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: h
6、ttps:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not
7、 be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the
8、benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 145 004 V13.1.0 (2016-04)23GPP TS 45.004 version 13.1.0 Rel
9、ease 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual P
10、roperty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR
11、searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been pr
12、oduced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference
13、between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause
14、 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 145 004 V13.1.0 (2016-04)33GPP TS 45.004 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3For
15、eword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g31.1 References 5g31.2 Abbreviations . 5g32 Modulation format for GMSK . 5g32.1 Modulating symbol rate 5g32.2 Start and stop of the burst . 6g32.3 Differential encoding 6g32.4 Filtering 6g32.5 Output phase . 7g32.6 Modulation . 7g32.7 Ove
16、rlaid CDMA . 8g33 Modulation format for 8PSK 8g33.1 Modulating symbol rate 8g33.2 Symbol mapping 8g33.3 Start and stop of the burst . 9g33.4 Symbol rotation 9g33.5 Pulse shaping 9g33.6 Modulation . 10g34 Modulation format for 16QAM and 32QAM at the normal symbol rate . 10g34.1 Modulating symbol rate
17、 10g34.2 Symbol mapping 11g34.3 Start and stop of the burst . 12g34.4 Symbol rotation 13g34.5 Pulse shaping 13g34.6 Modulation . 13g35 Modulation format for QPSK, 16QAM and 32QAM at the higher symbol rate 13g35.1 Modulating symbol rate 13g35.2 Symbol mapping 14g35.3 Start and stop of the burst . 14g
18、35.4 Symbol rotation 14g35.5 Pulse shaping 14g35.6 Modulation . 15g36 Modulation format for AQPSK 15g36.1 Modulating symbol rate 15g36.2 Symbol mapping 15g36.3 Start and stop of the burst . 16g36.4 Symbol rotation 17g36.5 Pulse shaping 17g36.6 Modulation . 17g3Annex A (normative): Tx filter coeffici
19、ents for the spectrally wide pulse shape 18g3Annex B (informative): Change history . 19g3History 20g3ETSI ETSI TS 145 004 V13.1.0 (2016-04)43GPP TS 45.004 version 13.1.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of
20、 the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Ver
21、sion x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the t
22、hird digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 145 004 V13.1.0 (2016-04)53GPP TS 45.004 version 13.1.0 Release 131 Scope The modulator receives the bits from the encryption unit, see 3GPP TS 45.001, and produces an RF signal. The filtering
23、of the Radio Frequency (RF) signal necessary to obtain the spectral purity is not defined, neither are the tolerances associated with the theoretical filter requirements specified. These are contained in 3GPP TS 45.005. 1.1 References The following documents contain provisions which, through referen
24、ce in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version appl
25、ies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: Vocabulary for 3GPP Specifications. 2 3GPP TS 45.001: Physical Layer on the
26、Radio Path (General Description). 3 3GPP TS 45.002: Multiplexing and multiple access on the radio path. 4 3GPP TS 45.005: Radio transmission and reception. 5 3GPP TS 45.010: Radio subsystem synchronization. 6 3GPP TS 44.060: Radio Link Control/ Medium Access Control (RLC/MAC) protocol. 7 3GPP TS 43.
27、064: General Packet Radio Service (GPRS). 8 3GPP TS 45.003: Channel Coding. 1.2 Abbreviations Abbreviations used in this specification are listed in 3GPP TR 21.905. In addition to abbreviations in 3GPP TR 21.905 the following abbreviation apply: AQPSK Adaptive Quadrature Phase Shift Keying 2 Modulat
28、ion format for GMSK 2.1 Modulating symbol rate The modulating symbol rate is the normal symbol rate which is defined as 1/T = 1 625/6 ksymb/s (i.e. approximately 270.833 ksymb/s), which corresponds to 1 625/6 kbit/s (i.e. 270.833 kbit/s). T is the normal symbol period (see 3GPP TS 45.010). ETSI ETSI
29、 TS 145 004 V13.1.0 (2016-04)63GPP TS 45.004 version 13.1.0 Release 132.2 Start and stop of the burst Before the first bit of the bursts as defined in 3GPP TS 45.002 enters the modulator, the modulator has an internal state as if a modulating bit stream consisting of consecutive ones (di = 1) had en
30、tered the differential encoder. Also after the last bit of the time slot, the modulator has an internal state as if a modulating bit stream consisting of consecutive ones (di= 1) had continued to enter the differential encoder. These bits are called dummy bits and define the start and the stop of th
31、e active and the useful part of the burst as illustrated in figure 1. Nothing is specified about the actual phase of the modulator output signal outside the useful part of the burst. dummy bitsOutput phaseThe useful partThe active part000. .000 1111111111113 tail bits3 tail bitsdummy bits1/2 bit 1/2
32、 bitFigure 1: Relation between active part of burst, tail bits and dummy bits. For the normal burst the useful part lasts for 147 modulating bits 2.3 Differential encoding Each data value di= 0,1 is differentially encoded. The output of the differential encoder is: $(,)ddd diii i= 101 where denotes
33、modulo 2 addition. The modulating data value iinput to the modulator is: iiid= +12 11$(,) 2.4 Filtering The modulating data values ias represented by Dirac pulses excite a linear filter with impulse response defined by: g t h t recttT() ()*=where the function rect(x) is defined by: recttTTfor tT= 6T
34、. A spectrally narrow pulse shape, c0(t), which is the linearised GMSK pulse as defined in subclause 3.5 for the normal symbol period. NOTE: The linearised GMSK pulse is not scaled to the reduced symbol period. Hence its duration in terms of the reduced symbol period is 6T. The base band signal is +
35、=iiTiTtcsty )5.2()(0The time reference t = 0 is the start of the active part of the burst as shown in figure 3. This is also the start of the symbol period of symbol number 0 (containing the first tail bit) as defined in 3GPP TS 45.002. For the uplink, the pulse shape that shall be used when transmi
36、tting a burst is dependent on the parameter Pulse format that is sent during assignment (see 3GPP TS 44.060). For the downlink the spectrally narrow pulse shape shall be used. 5.6 Modulation The modulated RF carrier during the useful part of the burst is: )2(00)(Re2)( +=tfjsetyTEtx where Esis the en
37、ergy per modulating symbol, f0is the centre frequency and 0is a random phase and is constant during one burst. 6 Modulation format for AQPSK 6.1 Modulating symbol rate The modulating symbol rate is the normal symbol rate which is defined as 1/T = 1 625/6 ksymb/s (i.e. approximately 270,833 ksymb/s),
38、 which corresponds to 2*1 625/6 kbit/s (i.e. 541,666 kbit/s). T is the normal symbol period (see 3GPP TS 45.010). 6.2 Symbol mapping The modulating bits are mapped to the quaternary symbols according to Table 5. ETSI ETSI TS 145 004 V13.1.0 (2016-04)163GPP TS 45.004 version 13.1.0 Release 13Table 5:
39、 Mapping between modulating bits and quaternary symbols. Modulating bits for ai, biAQPSK symbol in polar notation si(0,0) je (0,1) je(1,0) je (1,1) je This is illustrated in Figure 5. Figure 5: Mapping of modulating bits to AQPSK symbols The ratio of power between the Q and I channels is defined as
40、the Subchannel Power Imbalance Ratio (SCPIR). The value of the SCPIR is given by ()()dBSCPIR tanlog2010= . The value of shall be chosen such that dBSCPIR 10 . 6.3 Start and stop of the burst Before the first bit of the burst as defined in 3GPP TS 45.002 enters the modulator, the state of the modulat
41、or is undefined. Also after the last bit of the burst, the state of the modulator is undefined. The tail symbols (see 3GPP TS 45.002) define the start and the stop of the active and the useful part of the burst as illustrated in Figure 6. Nothing is specified about the actual phase of the modulator
42、output signal outside the useful part of the burst. ETSI ETSI TS 145 004 V13.1.0 (2016-04)173GPP TS 45.004 version 13.1.0 Release 13Figure 6: Relation between active part of burst and tail symbols. For the normal burst (see 3GPP TS 45.001) the useful part lasts for 147 modulating symbols. 6.4 Symbol
43、 rotation The symbols are continuously rotated with radians per symbol before pulse shaping, where = pi/2. The rotated symbols are defined as jiiiess = 6.5 Pulse shaping The modulating symbols is as represented by Dirac pulses excite the following linear pulse shaping filter: c0(t), which is the lin
44、earised GMSK pulse as defined in subclause 3.5 for the normal symbol period. The base band signal is +=iiTiTtcsty )2()(0The time reference t = 0 is the start of the active part of the burst as shown in figure 6. This is also the start of the symbol period of symbol number 0 (containing the first tai
45、l bit) as defined in 3GPP TS 45.002. 6.6 Modulation The modulated RF carrier during the useful part of the burst is: )2(00)(Re2)( +=tfjsetyTEtx where Esis the energy per modulating symbol, f0is the centre frequency and 0is a random phase and is constant during one burst. ETSI ETSI TS 145 004 V13.1.0
46、 (2016-04)183GPP TS 45.004 version 13.1.0 Release 13Annex A (normative): Tx filter coefficients for the spectrally wide pulse shape For an oversampling factor of 16, i.e. 5200 ksamples/s, there are 97 Tx filter coefficients c1to c97for the spectrally wide pulse shape. The coefficients are symmetric
47、to c49, i.e. c49k= c49+k. The coefficients of c1 to c49are listed: 0.00225918460000 0.00419757900000 0.00648420700000 0.00931957020000 0.01259397500000 0.01605878900000 0.01959156100000 0.02292214900000 0.02570190500000 0.02767928100000 0.02852115300000 0.02791904300000 0.02568913000000 0.0216679270
48、0000 0.01579963100000 0.00821077000000 -0.00089211394000 -0.01114601700000 -0.02201830600000 -0.03289439200000 -0.04302811700000 -0.05156392200000 -0.05764086800000 -0.06034025400000 -0.05876224400000 -0.05209962100000 -0.03961692000000 -0.02072323500000 0.00496039200000 0.03765364500000 0.077321923
49、00000 0.12369249000000 0.17639444000000 0.23478700000000 0.29768326000000 0.36418213000000 0.43311409000000 0.50316152000000 0.57298225000000 0.64120681000000 0.70645485000000 0.76744762000000 0.82295721000000 0.87187027000000 0.91325439000000 0.94628290000000 0.97030623000000 0.98493838000000 0.99006899000000 ETSI ETSI TS 145 004 V13.1.0 (2016-04)193GPP TS 45.004 version 13.1.0 Release 13Annex B (informative): Change history SMG# SPEC VERS NEW_VERS
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1